Selling Everything...SR20DET, HKS GT3037, GReddy Oil Pan, Top Mount Manifold, etc.

[cnichols]

I'm cleaning out my engine bay...3rd cylinder is low on compression so it's time for a new project. The car still ran and drove fine. All parts are in fine working order. The following video was taken right before I tore her down.

http://www.streetelite.net/vids/BlueRunning.mpg

The coil packs, V-belts, shortblock, motor mounts, starter, and power steering pump have been sold. Everything else in the pictures are for sale. If you don't see it, or aren't sure, ask me...

[email protected]

AIM: midcnichols

http://www.streetelite.net/pics/blue10.jpg

http://www.streetelite.net/pics/bluebay1.jpg

http://www.streetelite.net/pics/bluebay3.jpg

http://www.streetelite.net/pics/bluebayfront.jpg

For sale:

HKS GT3037 Ball Bearing Turbo w/ Swain Tech coated turbine
Custom Top Mount Manifold (mild steel w/ ceramic coat)
Custom Stainless downpipe

Tial 38mm Wastegate (Black w/ 1 bar spring)
http://www.streetelite.net/pics/tial.jpg

Stock SR Tranny
SPEC Stage 2 clutch - 20 miles
Complete Stock Head (Absolutely nothing wrong)
Mediterranean Blue Powder coated Valve cover
Black powder coated Intake manifold
Intake manifold gasket (20 miles)
Cam Angle Sensor
#63 ECU
Mr. Gasket copper exhaust gasket (20 miles)
Throttle body w/ TPS (will separate)
Brand new S13 harness already converted for S14
Ignitor chip

Alternator w/ Mediterranean Blue powder coated pulley
http://www.streetelite.net/pics/alternator.jpg

Crank Pulley
Water Pump Pully powder coated Med. Blue
Water Pump w/ 20 miles
Nismo Thermostat
Stock fuel injectors (370cc w/ rail and Med. Blue powdercoated tops)
GReddy oil pan (20 miles)

SOHC MAF x2
http://www.streetelite.net/pics/sohcmaf.jpg

[drifter_e]

im interested in the GReddy oil pan... lmk how much shipped to 06114

[WILDACEX187]

intersted in thermostat, water pump, clutch (after i see pix) and greddy oil catch can. wat are the prices shipped to 11101

[johngriff]

wait... baseline 14psi!

gt3037?

370cc injectors!! Zuuuuuuuuuuuuuuuuuuuhh????

Now i know why it blew, that sucks dude.

I was hoping you had like 740cc's to sell!

Aftermarket cams?

Hmm
let me know

714 493 0293

John griff

[DJPimpFlex]

interested in the oil pan and the thermostat if those guys dont come through.

[s13silady]

you selling your rad and fans by any chance? or the FMIC with piping?

[supers0nic]

alternator belt tensioner bolt, its the bolt with a half moon shaped tip it connects to the upper hole of the alternator and that black bracket, ill take that bracket too

[speeddreamz]

Radiator, Fans, Thermostat, and GT3037 turbo if noone else comes through.

[s14turbosilvia]

radiator, fans, GT3037, and clutch.

[s14turbosilvia]

oh, and the belts. what kind are they and how old?

[capesr20de]

how much for the turbo and the manifold?

[Siizzzoooo]

damn, why didn't you post this up in the 502 forums?

I'm interested in a few things...locals get first dibs right ? :p

[AadosX]

I'm interested in the WG, email me [email protected]

[autobahNESSA]

Is that an adjustable fpr? if so how much and for the fuel pressure guage with the lines and adapter?
shipped to 95035
thanks

[fredbblakemore]

I'll take the ignitor chip. $90 shipped to MI zip 48198? Email soonerbh(at)gmail.com

[kickboxin]

How much are you asking for the tranny? what condition is it in?

[cnichols]

Whoah...looks like I need to put e-mail notification on.

Update..

Someone is currently buying the turbo, manifold, wastegate, downpipe, and tranny together. If that falls through, I will notify you in order of posting on here.

Radiator and fans also are being held awaiting payment.

Adj. FPR is sold as well as the catch can.

The belts are Power Enterprise and they are sold as well.

Oil pan sale is pending.

[cnichols]

alternator belt tensioner bolt, its the bolt with a half moon shaped tip it connects to the upper hole of the alternator and that black bracket, ill take that bracket too

I'll see if I can't find it tonight.

[cnichols]

damn, why didn't you post this up in the 502 forums?

I'm interested in a few things...locals get first dibs right ? :p

My bad man...it's up there now. I figured it made more sense to post on here and NICO and FA first.

[s14turbosilvia]

holy shit, it's practically all sold already. damnit.

[supers0nic]

I'll see if I can't find it tonight.


cool thanks dude, you know what ill take the alternator too while your at it ;)

[CO S13]

Do you still have the water pump?? If so let me know how much with shipping to 80235. [email protected]

[drifter_e]

update on the oil pan!!!! i need one asap.... money on hand!

[95nis240sx]

are u still selling your front mount and pipeing i have the money and i need one asap. also i would like to see what the clutch looks like if u still have it thanks email me at [email protected]

[fade2black]

How much for the injectors shipped to 06105, and the walbro fuel pump if you still have it. do you by happen to have a t25 for sale?

[cnichols]

Clutch is still for sale. First one to send me $200 for it gets it as well.



Don't have a T25, fuel pump not for sale.


This is the clutch as it sits right now.

http://www.streetelite.net/pics/clutch.jpg

[WILDACEX187]

still want the clutch but i want to see pix plz.

[West]

Can I have the 3037 and Brembo's? Im still paying for them :( haha

Actually its all paid off. :)

So what you getting to replace Blurple?

[noodl35]

you still selling the fmic w/piping and the complete sr head. If so, how much? Thanks.

[cnichols]

Can I have the 3037 and Brembo's? Im still paying for them :( haha

Actually its all paid off. :)

So what you getting to replace Blurple?

Still keeping it....just new powerplant.

[cnichols]

you still selling the fmic w/piping and the complete sr head. If so, how much? Thanks.

FMIC and complete piping still for sale.

Took the head off, #3 piston is destroyed. The head has a couple of dings, but not on the valves. Motor still turns freely and ran fine when I took it down. It just had a ton of blowby. I can still spin the motor with my hands VERY easily. I'll e-mail you pics.

[NoRider]

I'd take the IC, down pipe, test pipe and an exhaust if u got one? how much?? pm me with info. thanks

[cnichols]

Stuff still for sale....buyers backed out...

Valve Cover - $100 shipped
Stock Thermostat - $25 shipped
Water Pump - $50 shipped
Turbo, manifold, wastegate, gaskets, downpipes - $1750 shipped
Intercooler w/ piping - $350 shipped
Knock Sensor and harness - $50
Tranny - $300 shipped
Flywheel - $50 shipped

No PMs please. [email protected]

[qt_240]

can i just get the manifold ? and maybe the turbo ? let me know how much shipped.. [email protected]

[supers0nic]

lol i didnt back out, i was waiting for you to tell my how much, also if you found that bolt for me. And where to send payment! =O

[cnichols]

lol i didnt back out, i was waiting for you to tell my how much, also if you found that bolt for me. And where to send payment! =O

Sorry...what for? And, what bolt? I've already forgotten and been out of it for weeks trying to get this stuff gone, catch up at work, and finish my new project.

[email protected] is the BEST way to contact me. If you want a quick response, do not PM or post here.

Still have the turbo kit. Would rather sell as a whole, but will listen to offers for individual parts. Send to the e-mail address above!

[240KAT]

what kind of flywheel?
$10 shipped for exhaust gasket.

[cnichols]

Stock Flywheel, doesn't even need resurfacing.

I'll include the gasket w/ whoever gets the manifold.

I REPEAT: IF YOU ARE INTERESTED IN ANYTHING E-MAIL ME AT

[email protected]

Do not post or PM...it will take me much longer to respond.

[DoriftoPnoy]

Are you selling the FMIC? If so what kind is it and how much?

[cnichols]

The intercooler and piping was made by HKS USA for their project KA-T back in 1998 which was featured on the cover of Super Street that year.

It is perfect for fitting behind the stock bumper, but has some wear. I'll take $250 for everything excluding the BOV. The piping in the engine bay is polished and is from HKS and is already flanged for the BOV. $375 shipped w/ the BOV.

[whooha1217]

u still have the crank pulley???? please let me know i NEED them

[95zilvia]

Didn't see if you sold the clutch or not... I'm pretty interested.
Are you shipping? If so, I will need it shipped to San Francisco.

[vsiev]

if you have the power steering pump, I'll take that off your hands.

[gt3071r240]

i was wondering if you are selling the rocker arms and if so what shape are they in can you possibly take some pics and email them to me at [email protected]
i am currently rebuilding my sr and the rocker arms are in poor shape so i need some replacements. thanks

[mumbles]

how about the power steering line. the hardline from the rack to the rubber line into the ps pump. maybe the rubber line too. let me know [email protected]

[180fan]

Pics of the FMIC with the piping and the BOV to [email protected] please. Will it come with couplings by any chance?

[TheSparo]

are all of you all illiterate? he said EMAIL HIM NOT to POST HERE