Removing the rear bumper....

[xNotoriousGQx]

Does anyone know how to remove the rear bumper of the 95-98 240sx (I assume the 95-96 and 97-98 has the same rear section)? I can't seem to figure it out. Thanks for the help.

[yenpit]

my bodyman pulled mine, but i remember seeing 3-4 studs & nuts coming thru each side at the rear of the car in the trunk. pull ur carpet panels out and look back into each corner down behind the tail lights..... should see em there. then, iirc there r 5-6 plastic (?) screws across the top edge towards the middle where the trunk lid closes. i'll try to remember to look when i get home tonight......will post tomorrow if different &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/satisfied.gif" border="0" valign="absmiddle" alt=':satisfied:'>

[crazyikimasho]

yes you are correct, we just swapped a 97 onto my 96 this past weekend. There are some pop up screws on top of the bumper then a couple under the tail lights, three on each end on the inside of the trunk connecting to the fenders, then there are multiple screws under the bumper, below the car, those you unscrew then pull them out with needlenose pliers, not as hard as I thought. My first bodywork turned out to be somewhat easy