View Full Version : Parting OUT TOTALED S13
007jpang
02-10-2005, 02:12 AM
every thing is up for super cheap just name the part and ill see if i can get it to you.
everything in the front is gone though (front end CRASH)... bumper, fender, etc.
John
s13gonwild
02-10-2005, 02:18 AM
no chance youll sell it as is? ived been looking for a car with major front end damage. if yours intrested pm me
thanks
007jpang
02-10-2005, 02:24 AM
no chance youll sell it as is? ived been looking for a car with major front end damage. if yours intrested pm me
thanks
pm you
but im going to take all the aftermarket parts off...
SimpleSexy180
02-10-2005, 02:53 AM
you dont have the coolant reservoir tank??
007jpang
02-10-2005, 02:59 AM
not sure but i have to check... just totaled it tonite feb 9 at 9:30...
still at the junk yard...
SimpleSexy180
02-10-2005, 03:23 AM
wow that sux well if its all in good shape ill take it :naughtyd:
rockdysan
02-10-2005, 03:58 AM
if it was a hatch, how much do you want for the trunk interior pieces?
FRpilot
02-10-2005, 08:20 AM
where in the bay area are you?
l33tmonkeyman
02-10-2005, 08:46 AM
what is the condition of ur carpet and what color is it?
qt_240
02-10-2005, 08:52 AM
heater core and lines... let me know .. PM me
WILDACEX187
02-10-2005, 09:39 AM
any aftermarket parts?
007jpang
02-10-2005, 10:09 AM
if it was a hatch, how much do you want for the trunk interior pieces?
make me an offer...
where in the bay area are you?
Daly city near sf
what is the condition of ur carpet and what color is it?
grey/ black.... condition is good
heater core and lines... let me know .. PM me
THIS goes to everyone that want's parts... just give me your contact info( prefer #) and we can set up a time for pick and pull. give me a decent price for what you think it is worth cause i just want to help you guys out and at the same time pay off some of the insurace bills.
John
007jpang
02-10-2005, 10:09 AM
also all after market parts will probably not be for sale.
cause i getting another 240sx
John
jamik_69
02-10-2005, 10:18 AM
first off sorry to hear about the crash are you ok? if its a dohc i need all the power steering lines and the fluid resiviour asap if there not all bent from the crash will you ship to canada? im desprate
thanks
mike
[email protected]
slider2828
02-10-2005, 10:30 AM
Is it a DOHC or a SOHC Engine. If it is a DOHC, can I buy the power steering lines and reservoir?
RpSinner
02-10-2005, 10:35 AM
so is it a hatch..if so i may be interested in the hatch...wing or no wing?
dizastaman
02-10-2005, 10:44 AM
Can i get the bolts on the back of the driveshaft that bolt it to the diff. they are kinda half-moon shaped. thanks.
Agent_S13
02-10-2005, 12:45 PM
Interested in:
1) Dash, NON-HUD, right? Any cracks/tears?
2) A-pillars
3) Kick Panels
Glad to see you're alright and already looking at your next project. I hope that the majority of the stuff I'm looking for is black/dark grey.
Also, manual doors/windows? Looking for a driver's side panel with door cups for both sides
If back seats from a hatch fit into a coupe then I'll take those too.
Let me know soon cuz I only have time on the weekends due to work... :jerkit:
You can e-mail me at
[email protected] to set up a time for us to meet up. (I'm on San Mateo)
Thanks!
-Aaron
'91 240sx coupe
FaLKoN240
02-10-2005, 01:27 PM
PMed about the ashtray.
dizastaman
02-10-2005, 02:56 PM
i also need a right rear upper strut mount, please
007jpang
02-10-2005, 02:59 PM
Ok to clear thing up it's a 1990 240sx ka24e hatch back... eveything in the intereior is black and grey.
so is it a hatch..if so i may be interested in the hatch...wing or no wing?
hatch no wing
Can i get the bolts on the back of the driveshaft that bolt it to the diff. they are kinda half-moon shaped. thanks.
sure
Interested in:
1) Dash, NON-HUD, right? Any cracks/tears?
2) A-pillars
3) Kick Panels
Also, manual doors/windows? Looking for a driver's side panel with door cups for both sides
If back seats from a hatch fit into a coupe then I'll take those too.
Let me know soon cuz I only have time on the weekends due to work... :jerkit:
You can e-mail me at
[email protected] to set up a time for us to meet up. (I'm on San Mateo)
Thanks!
-Aaron
'91 240sx coupe
pm you.
007jpang
02-10-2005, 03:02 PM
i also need a right rear upper strut mount, please
not sure what that is but pm me you # and this goes to everyone that wants to stop by
FaLKoN240
02-10-2005, 03:14 PM
No ashtray?
So i guess i shouldnt call you about going driving tomorrow. ??
projectRDM
02-10-2005, 04:08 PM
So i guess i shouldnt call you about going driving tomorrow. ??
Haha.
fddgfh
007jpang
02-10-2005, 04:13 PM
No ashtray?
i have the ash tray...
AllenRPS13
02-10-2005, 04:15 PM
how about the gauge bezel?
007jpang
02-10-2005, 05:05 PM
how about the gauge bezel?
that's in perfect condition.
007jpang
02-10-2005, 10:37 PM
pm you Agent_S13
stillmatic
02-10-2005, 10:59 PM
Parting out pics (stage 1, 45psi :rofl: )
http://members.aol.com/ninetyonerms13/1.jpg
http://members.aol.com/ninetyonerms13/2.jpg
http://members.aol.com/ninetyonerms13/3.jpg
http://members.aol.com/ninetyonerms13/4.jpg
http://members.aol.com/ninetyonerms13/5.jpg
http://members.aol.com/ninetyonerms13/6.jpg
http://members.aol.com/ninetyonerms13/7.jpg
http://members.aol.com/ninetyonerms13/8.jpg
http://members.aol.com/ninetyonerms13/9.jpg
dvdevo
02-10-2005, 11:35 PM
hahahah parting out pics
AllenRPS13
02-11-2005, 12:08 AM
how much for the gauge bezel u are asking? (shipped price)
007jpang
02-11-2005, 01:01 AM
how much for the gauge bezel u are asking? (shipped price)
r you talking about the whole cluster??
kazuo
02-11-2005, 01:56 AM
Parting out pics (stage 1, 45psi :rofl: )
http://members.aol.com/ninetyonerms13/6.jpg
Hey John,
Were you driving up 9th street (IIRC) in San Francisco yesterday? (Feb. 9th) around 2:30PM? I saw a car exactly like yours drive past (Black hatch, donuts, the "How's my Drifting" sticker on the rear passenger side bumper w/ what appeared to be aftermarket exhaust).
Sucks that you crashed dude, but at least you're ok. get another shell and rock on
Later
007jpang
02-11-2005, 09:13 AM
yep that was me ... i was going to the main library in SF...
pm sent.. sorry bout the car dude.. passed by it earlier, looked pretty bad.. glad you're ok though.. late.
iggy
007jpang
02-11-2005, 04:30 PM
you can stop by today at 4:30....
shawn240sx
02-11-2005, 05:37 PM
Your hatch looks like it has a wiper on it???....Let me know I am in the bay area and interested in a black hatch with spoiler "if possible" ok without....must have defrost and no rust or dents. Let me know.
Thanks Shawn.
email:
[email protected]
AllenRPS13
02-12-2005, 12:02 AM
r you talking about the whole cluster??
no, just the bezel
007jpang
02-12-2005, 12:24 AM
no, just the bezel
$10 shipped sounds fine...
JDMvelocity
02-12-2005, 12:44 AM
how much for front and passenger seats? can i get a better view of the seats?
how much for the rear seats and carpet? better pics also please
email:
[email protected]
AllenRPS13
02-12-2005, 01:35 AM
$10 shipped sounds fine...
sounds good! but can i have the pics of the bezel? thanks!
email:
[email protected]
007jpang
02-12-2005, 09:57 AM
my friend has the camera so... i'll get back to you guys..
john
kickboxin
02-12-2005, 10:19 AM
do you have the hatch, door and ignition locks with keys? If so, email me at
[email protected]om
Jdotsturn
02-12-2005, 06:45 PM
I want the front seats will you ship???
007jpang
02-12-2005, 07:03 PM
the pass. and driver seat r both leather...
the passenger seat is in
Perfecto condition
but the driver seat is a little worn on the side....
the back leather seat is ripped...
and the carpet is in good condition..
for all this i'll let if go to the first person with $150 or who ever give me the best offer.
located near SF
john
007jpang
02-12-2005, 07:05 PM
do you have the hatch, door and ignition locks with keys? If so, email me at
[email protected]
i have the hatch... one good door and the ignition locks with key
John
SpdElemts
02-12-2005, 09:30 PM
Do you have the radio bracket?
007jpang
02-12-2005, 09:47 PM
Do you have the radio bracket?
yes.
pm me you #
john
AllenRPS13
02-13-2005, 01:08 AM
the bezel has all the button? like cruise control, defrogger, etc? if so, i will take it!
Equinox
02-13-2005, 01:51 AM
I need rear cross member for 5spd transmission, upper shift plate, and the 5spd trim panel if you have it.
!Zar!
02-13-2005, 01:55 AM
Is it power windows? If so I need the drivers side power window rack.
MurdarioStomp
02-13-2005, 01:57 AM
i need a good condition trim piece for around the shifter. also the trimpiece in the driver's door panel for power windows. let me know if theyre in good shape (no scratches and whatnot) and shoot me a shipped price. thanks!!
parker
02-13-2005, 05:20 AM
i need both door sills.. dont know what theyre called exactly, theyre the shiny metal trim on the doors. thanks
BOROSUN
02-13-2005, 07:49 AM
i need a hatch w/o rust. i can pick it up, im in daly city too.
007jpang
02-13-2005, 12:45 PM
i would really prefer local pick up for large heavy things, but will ship small light items...
and if you guys r in the area hurry up and come pick up the parts you need cause i'm planning to get the car out of my drive way in a week.
John
007jpang
02-13-2005, 12:50 PM
the pass. and driver seat r both leather...
passenger seat is in
driver seat and the carpet is in good condition..
$150 or who ever give me the best offer.
located near SF
john
NEW price FIRST $100 gets it.
007jpang
02-13-2005, 02:20 PM
also selling B&M short shifter.
http://www.zilvia.net/f/showthread.php?t=72867
AllenRPS13
02-13-2005, 03:36 PM
$10 shipped sounds fine...
the bezel has all the button? like cruise control, defrogger, etc? if so, i will take it!
007jpang
02-13-2005, 06:00 PM
the bezel has all the button? like cruise control, defrogger, etc? if so, i will take it!
can't sell cause the bezel cracked.
slammedS13
02-13-2005, 07:02 PM
Are you going to be selling the 5speed conversion? If so how much?
007jpang
02-13-2005, 08:17 PM
i think the transmission may be fucked up... but im not sure... you can have the ecu, pedal, whatevery you need for 5 speed con... for $100
John
007jpang
02-13-2005, 08:19 PM
http://img.photobucket.com/albums/v692/007s13/Picture0162.jpg
http://img.photobucket.com/albums/v692/007s13/Picture0152.jpg
http://img.photobucket.com/albums/v692/007s13/Picture0142.jpg
http://img.photobucket.com/albums/v692/007s13/Picture0122.jpg
http://img.photobucket.com/albums/v692/007s13/Picture0112.jpg
http://img.photobucket.com/albums/v692/007s13/Picture0102.jpg
http://img.photobucket.com/albums/v692/007s13/Picture0172.jpg
http://img.photobucket.com/albums/v692/007s13/Picture0182.jpg
http://img.photobucket.com/albums/v692/007s13/Picture0192.jpg
http://img.photobucket.com/albums/v692/007s13/Picture0202.jpg
http://img.photobucket.com/albums/v692/007s13/Picture0232.jpg
http://img.photobucket.com/albums/v692/007s13/Picture0272.jpg
007jpang
02-13-2005, 08:23 PM
i still have the carpet but i just took it out before the crash.
ALTRNTV
02-13-2005, 08:30 PM
Selling the suspension parts? I need a front lower control arm... Doesn't appear to be damaged judging by the pics.
007jpang
02-13-2005, 08:48 PM
right or left???
MurdarioStomp
02-13-2005, 09:14 PM
i need a good condition trim piece for around the shifter. also the trimpiece in the driver's door panel for power windows...
i saw you have the door panel piece but not sure about the shifter trim
007jpang
02-13-2005, 09:43 PM
im not sure if the shifter trim is sold... but i'll get back to you.
007jpang
02-13-2005, 10:34 PM
ok the shifter trim is not sold... but the door panel piece is sold.
john
ALTRNTV
02-13-2005, 10:44 PM
I need the front left lower control arm.
007jpang
02-13-2005, 11:02 PM
I need the front left lower control arm.
pm you
John
007jpang
02-14-2005, 07:53 PM
everyone is coming over on thursday and friday...
if anyone want to stop by post up here and i'll pm you my #
John
mjjstang
02-14-2005, 10:19 PM
HI, I am looking for the transmission wire harness, MT of course. also the metal plate and rubber shift boot that go under the leather boot, also need the bracket that mounts the exhaust to the transmission mount, (really need that, my exhasut is shaking like crazy on the highway and hitting frame reail) please let me know if you have any of these parts.
007jpang
02-14-2005, 10:37 PM
have the rubber boot and metal plate. but will have to look for the
transmission wire harness
bracket for exhaust...
i will look and let you know.
John
dvdevo
02-14-2005, 11:07 PM
john remember to save me the ecu connector. thanks.
ooo.. i forgot.. i need the speed sensor if you still have it.. n a stock shift knob.. lol.. pm me or give me a call.. thnx..
iggy
007jpang
02-15-2005, 05:32 PM
hey david and iggy,
just stop buy on thursday or friday at around 4ish cause i don't know where that shit is located
John
dvdevo
02-15-2005, 08:34 PM
i'll go over thursday..man i'm so lazy. You live literally down the block..
007jpang
02-15-2005, 09:17 PM
that's some funny shit...
oh and just bought a 240sx coupe ...
HELL YAH NIGGA
lol.. just passed by the coupe w/ narc.. i didnt really get a good look at it 'cus narc's turbo ka was so fast.. 380hp.. lolz.. i'll try to drop by there w/ dvd on thursday..
007jpang
02-15-2005, 09:34 PM
eric is coming over too with his 45psi turbo
stillmatic
02-15-2005, 10:31 PM
Your coupe is a pos. How much did you get that for? Oh yeah, I might stop by on thursday too to return your "golden" exhaust and to pick up my shit. 45psi is weak. LOL!
TurDz
02-15-2005, 10:36 PM
007jpang,
do you have the factory jack tools by any chance? the ones in that black pouch (hook + rod)
if you do, let me know how much shipped. thanks man.
007jpang
02-15-2005, 10:52 PM
yah... but don't have the black bag... you can pick up cause i don't want to ship...im just minutes away from sf.
im thinking $20
John
dvdevo
02-15-2005, 11:34 PM
why dont you drive up the block to show me your new coupe.. bish. hahah i want a coupe =[
007jpang
02-16-2005, 12:36 AM
i'll call you up first... the only problem with it is that it was hit by a guard rail on the driverside rear quarter panel.
john
pr240sx
02-16-2005, 09:05 AM
What about the front knuckle screws
The one at the strut (smaller one) for both sides
These are the screws to adjust aligment on the front
Shipped to 00921
007jpang
02-16-2005, 08:27 PM
i'll see what i can do
i'll post or pm you back
john
Hypertek99
02-17-2005, 09:29 AM
Is the rear bumper in good condition??? How much for the rear bumper
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.