Duckorubber
01-22-2005, 07:53 AM
Finacial problems forcing me to sell some goodies
For Sale, prefer local pickup, all for best offer... NO LOWBALLERS!
4 5 lug 16x9 3 Piece BBS Racing wheels with 4 never used Kumho ASX (f)225/50 (r)245/50 (not totally sure of offset, Will measure if your heart is set on these) requires longer studs. Email for pics or better description
http://www.bobwoodmantires.com/wheels/wheels.html
For those of you doing research on the worth of the wheels, they are real racing wheels.. not wheels made to look like them..
TA-35/TA-50 outer rim halves and TI-50 Inner rim halves, magnesium center sections.
2x
1x16
8x16
2x
1.5x16
7.5x16
They weigh less than 20lbs a piece without tires. I'm not totally sure of the offset of the 1x16+8x16 wheels, but the 1.5x16+7.5x16 is +16 the center sections have the same thickness so you can probably do the math to compute the offset of the other wheels.. also by changing rim halves you can change offset.. obviously, using the wheels that I have you can make a 16x8.5 and a 16x9.5 so it would effectly change your offset the same way a .5" spacer would..
5 lug conversion - s14 front spindles + na 300zx rear hubs with nismo 60 mm studs already pressed in to run the wheels previously mentioned.
(one stud broke while pressing and hasnt been replaced yet, will replace if buyer asks)
30mm 300zx iron front calipers and 300zx iron rear calipers, including pads.
(one front caliper was painted red w/white letters and other is still rusted, Will paint/remove paint at request of buyer)
91-4 180sx front bumper painted flat black, only differnce from 240sx is emblem is not a full hamburger, but a rectangle badge sitting in a beveled circle to complete the logo. email for pics. If this description fits a USDM bumper too.. oh well it was bought on the spot when buying something else.. not much research went into it
Contact info:
Ronnie Bowman
Lutherville/towson/baltimore, MD
[email protected]
aim: rubberduckey210
don't PM, I am not on here that frequently anymore.
willing to drive to drop off the wheels+tires as far as 100 miles
I look forward to doing business with you :)
For Sale, prefer local pickup, all for best offer... NO LOWBALLERS!
4 5 lug 16x9 3 Piece BBS Racing wheels with 4 never used Kumho ASX (f)225/50 (r)245/50 (not totally sure of offset, Will measure if your heart is set on these) requires longer studs. Email for pics or better description
http://www.bobwoodmantires.com/wheels/wheels.html
For those of you doing research on the worth of the wheels, they are real racing wheels.. not wheels made to look like them..
TA-35/TA-50 outer rim halves and TI-50 Inner rim halves, magnesium center sections.
2x
1x16
8x16
2x
1.5x16
7.5x16
They weigh less than 20lbs a piece without tires. I'm not totally sure of the offset of the 1x16+8x16 wheels, but the 1.5x16+7.5x16 is +16 the center sections have the same thickness so you can probably do the math to compute the offset of the other wheels.. also by changing rim halves you can change offset.. obviously, using the wheels that I have you can make a 16x8.5 and a 16x9.5 so it would effectly change your offset the same way a .5" spacer would..
5 lug conversion - s14 front spindles + na 300zx rear hubs with nismo 60 mm studs already pressed in to run the wheels previously mentioned.
(one stud broke while pressing and hasnt been replaced yet, will replace if buyer asks)
30mm 300zx iron front calipers and 300zx iron rear calipers, including pads.
(one front caliper was painted red w/white letters and other is still rusted, Will paint/remove paint at request of buyer)
91-4 180sx front bumper painted flat black, only differnce from 240sx is emblem is not a full hamburger, but a rectangle badge sitting in a beveled circle to complete the logo. email for pics. If this description fits a USDM bumper too.. oh well it was bought on the spot when buying something else.. not much research went into it
Contact info:
Ronnie Bowman
Lutherville/towson/baltimore, MD
[email protected]
aim: rubberduckey210
don't PM, I am not on here that frequently anymore.
willing to drive to drop off the wheels+tires as far as 100 miles
I look forward to doing business with you :)