NemeGuero
01-19-2005, 10:12 PM
Just as it all says:
S14 stock rear bumper: black needs to be repainted, no holes or cracks $150
S14 passenger door panel with cloth removed from sides (black) $25
sparco sprint + rail for an integra w/ sparco bracket $200 with rail $150 w/o
rb25/s14 custom downpipe clears steering column etc. $250
rb25/rb20/s14/s13 custom motor and tranny mounts (RB20DET and RB25DET series mounts RB series motor mounts for your 240 swap! This mount set is designed to lower the RB20/25 DET series motor as well as reposition it further back in the 240 engine compartment. By utilizing these mounts you will be able to use the stock Ka engine cross-member, as well as the stock Ka engine isolators (rubber mounts) and drive shaft (RB20DET only, -The stock drive shaft will not work with the RB25DET tranny so you will need to get a custom driveshaft made or use an RB20DET tranny). These mounts are designed to work with ALL 240sx years, and have been tested and are guaranteed to fit! ) $300
Z32 fuel pump good condition $50
Z32 fuel filter $15
Z32 rear driveshaft (for rb25 swap you need the yoke) $50
2 10" custom sub boxes s14 trunk specific $50
R34 Gt-R tail lights, brand new still in the box $500
any reasonable offer will be considered.. trying to get more money so I can drift!!! changed my mind about the RB, decided to do my suspension first.
also, I'll trade stuff for s14 5speed swap parts
s14 SE factory wing black, good condition $150
AIM: NemeGuero
E-mail: [email protected]
Cell: 408-499-1884
S14 stock rear bumper: black needs to be repainted, no holes or cracks $150
S14 passenger door panel with cloth removed from sides (black) $25
sparco sprint + rail for an integra w/ sparco bracket $200 with rail $150 w/o
rb25/s14 custom downpipe clears steering column etc. $250
rb25/rb20/s14/s13 custom motor and tranny mounts (RB20DET and RB25DET series mounts RB series motor mounts for your 240 swap! This mount set is designed to lower the RB20/25 DET series motor as well as reposition it further back in the 240 engine compartment. By utilizing these mounts you will be able to use the stock Ka engine cross-member, as well as the stock Ka engine isolators (rubber mounts) and drive shaft (RB20DET only, -The stock drive shaft will not work with the RB25DET tranny so you will need to get a custom driveshaft made or use an RB20DET tranny). These mounts are designed to work with ALL 240sx years, and have been tested and are guaranteed to fit! ) $300
Z32 fuel pump good condition $50
Z32 fuel filter $15
Z32 rear driveshaft (for rb25 swap you need the yoke) $50
2 10" custom sub boxes s14 trunk specific $50
R34 Gt-R tail lights, brand new still in the box $500
any reasonable offer will be considered.. trying to get more money so I can drift!!! changed my mind about the RB, decided to do my suspension first.
also, I'll trade stuff for s14 5speed swap parts
s14 SE factory wing black, good condition $150
AIM: NemeGuero
E-mail: [email protected]
Cell: 408-499-1884