tastyratzz
01-18-2005, 11:00 AM
Ok guys heres the deal. everything is probabbly going up on ebay in a few days. im gonna list what i want for these first and give you guys first dibs on this stuff.
First: z32 afm. looks to me like its mint and the guy i got it from told me it had less than 50k on it, and it looks it. screen isnt mutilated or anything it appears to be good. i decided to go map sensor since i have an ems for my car now so i never had a need to put it in and its just sitting. im lookin for 150+ship
***DT05-R 17 inch 4 lug mega wide gunmetal rims. NEW still in the box!! I have 17x8.5+25 and 17x9.5+30. Perfect for use with a little fender roll. I also have a fender roller and may be able to work a deal for a lease if you buy these rims. I had these custom made for me in japan, I waited over 3 months for them from m2. These might as well be one offs because they are special ordered in the group buy. i didnt want staggered so I called to ask for something and they told me there was nothing they could do, and that they may not run another group buy for a very long time so unfortuanately im out of luck. that means if you dont get these through me, you probabbly wont get them at all. I want 900$ plus shipping or you can come pick them up.
http://www.tougefactory.com/images/dsmall.jpg
new locks and key. i got this before but ended up getting another 240 so i dont need them. This is a new lock for the drivers side, passenger side, and hatch. these locks cost me somethin like 230$ for all 3 and getting them cut. i had no idea they would cost that freakin much and neither did the locksmith because he apologized up and down after he found out the cost. our locks must be made of gold but either way i wont part these 3 all 3 with the key for 150 shipped!
**HIDS. These were made for a brand new BMW in europe and everything is top notch and all OEM! The ballasts are produced by hella and the d2s bulbs are made by phillips. Projectors came out of a new bmw, unknown origin i dont remember which one but they look really nice, might be bosch design. these produce a pretty decently colorful cutoff and are brand new. the only thing wrong is on the connector on one side the small plastic piece on the part that bends down cracked so I cleaned it up and wrapped electrical tape around it to make sure 100% seal is there just in case. other than that the thing has never been used more than a few minutes time which was just me testing the unit to make sure everything is ok. i wanna get 390$ plus shipping for these which is an awesome price for all oem components like this. also bulbs are 4300k in color which produces the most usable light range over higher temp bulbs.
Casper Billet aluminum shields and adaptors for using a d2s/d2r hid bulb in an h4 housing. i paid 65 or so shipped for these i think, willing to part for 40$ plus shipping.
decided to sell the hid and h4 hid conversion setup because I am now just going with 4 90mm hella projectors custom mounted and h9 bulbs. i need the money from the hids to pay for this setup.
good 91+ rug with no holes that just needs to be dyed. I dyed my current 240 rug black and it looks insanely good, 15$ later it looks like new. this one has stains but those all dissappear with the dye. 40$ picked up. this is what the black dye looks like on your rugs...
http://www.angelfire.com/or2/aznflyboi/mys13interior.html
92 interior wiring harness. not the engine harness, this is the one with the billion connectors behind the dash. it was cut right behind the drivers side door but all wires ahead of that are complete. This is from a 92 non se power nuthin. rare to find someone to take the time to remove this. offers open.
brake master cylinder. 15$ picked up
couple of fender liners. gotta do more research on these but they go cheap like 25$ each. one with broken tabs for 15$ if you want it (passenger side i think?)
oem s13 seat. got passenger side sitting, if you want it you can have it free. better than nothing but they have been outside for a little bit. they do seem fine however. maybe you wanna cut the brackets for a custom project, dunno but you gotta take the whole seat.
tons of other stuff ill post up when i think of it but this is what i have for now. My real name is Tastyratz but i was unjustly pinked so I had to make another for my fs thread. several people can probabbly vouch for me on the board as a seller, as well as 240sxone, 240sxforums, etc. also having 130+ feedback on ebay and being paypal verified should say something. post here or email me at "tastyratzsweeps @ hotmail . com" with the subject saying "about your parts" thats my spam email address so you gotta put it so i can differentiate.
First: z32 afm. looks to me like its mint and the guy i got it from told me it had less than 50k on it, and it looks it. screen isnt mutilated or anything it appears to be good. i decided to go map sensor since i have an ems for my car now so i never had a need to put it in and its just sitting. im lookin for 150+ship
***DT05-R 17 inch 4 lug mega wide gunmetal rims. NEW still in the box!! I have 17x8.5+25 and 17x9.5+30. Perfect for use with a little fender roll. I also have a fender roller and may be able to work a deal for a lease if you buy these rims. I had these custom made for me in japan, I waited over 3 months for them from m2. These might as well be one offs because they are special ordered in the group buy. i didnt want staggered so I called to ask for something and they told me there was nothing they could do, and that they may not run another group buy for a very long time so unfortuanately im out of luck. that means if you dont get these through me, you probabbly wont get them at all. I want 900$ plus shipping or you can come pick them up.
http://www.tougefactory.com/images/dsmall.jpg
new locks and key. i got this before but ended up getting another 240 so i dont need them. This is a new lock for the drivers side, passenger side, and hatch. these locks cost me somethin like 230$ for all 3 and getting them cut. i had no idea they would cost that freakin much and neither did the locksmith because he apologized up and down after he found out the cost. our locks must be made of gold but either way i wont part these 3 all 3 with the key for 150 shipped!
**HIDS. These were made for a brand new BMW in europe and everything is top notch and all OEM! The ballasts are produced by hella and the d2s bulbs are made by phillips. Projectors came out of a new bmw, unknown origin i dont remember which one but they look really nice, might be bosch design. these produce a pretty decently colorful cutoff and are brand new. the only thing wrong is on the connector on one side the small plastic piece on the part that bends down cracked so I cleaned it up and wrapped electrical tape around it to make sure 100% seal is there just in case. other than that the thing has never been used more than a few minutes time which was just me testing the unit to make sure everything is ok. i wanna get 390$ plus shipping for these which is an awesome price for all oem components like this. also bulbs are 4300k in color which produces the most usable light range over higher temp bulbs.
Casper Billet aluminum shields and adaptors for using a d2s/d2r hid bulb in an h4 housing. i paid 65 or so shipped for these i think, willing to part for 40$ plus shipping.
decided to sell the hid and h4 hid conversion setup because I am now just going with 4 90mm hella projectors custom mounted and h9 bulbs. i need the money from the hids to pay for this setup.
good 91+ rug with no holes that just needs to be dyed. I dyed my current 240 rug black and it looks insanely good, 15$ later it looks like new. this one has stains but those all dissappear with the dye. 40$ picked up. this is what the black dye looks like on your rugs...
http://www.angelfire.com/or2/aznflyboi/mys13interior.html
92 interior wiring harness. not the engine harness, this is the one with the billion connectors behind the dash. it was cut right behind the drivers side door but all wires ahead of that are complete. This is from a 92 non se power nuthin. rare to find someone to take the time to remove this. offers open.
brake master cylinder. 15$ picked up
couple of fender liners. gotta do more research on these but they go cheap like 25$ each. one with broken tabs for 15$ if you want it (passenger side i think?)
oem s13 seat. got passenger side sitting, if you want it you can have it free. better than nothing but they have been outside for a little bit. they do seem fine however. maybe you wanna cut the brackets for a custom project, dunno but you gotta take the whole seat.
tons of other stuff ill post up when i think of it but this is what i have for now. My real name is Tastyratz but i was unjustly pinked so I had to make another for my fs thread. several people can probabbly vouch for me on the board as a seller, as well as 240sxone, 240sxforums, etc. also having 130+ feedback on ebay and being paypal verified should say something. post here or email me at "tastyratzsweeps @ hotmail . com" with the subject saying "about your parts" thats my spam email address so you gotta put it so i can differentiate.