PAnut240
01-14-2005, 05:29 PM
Hey everyone,
Well I finally had enough. Due to a shitty machine shop I have broken a new exhaust cam and dropped a valve. So, I am now selling as a whole, or parting out if nescarry, my 240. Here is what it has,
red top SR20det, Border fuel rail with 850cc injectors, Tien HA suspension, Tanabe race medalion exhaust, gready 3" down pipe, enjuku racing bottom mount exhaust manifold, HKS BOV, Skyline GTR FMIC, Gready Intake manifold, BeeR valve cover, Ferra dule valve spring kit with titanium retainers, HKS 264 intake cam, Gready rocker arm stoppers, JE pistons, Eagle Rods, Findanza lightweight flywheel, ACT stage 2 street clutch, Enjuku racing 1peice driveshaft, Spair welded diff., OBX front and rear strut tower bars, Type X tail light conversion, East Bear headlight conversion, Greedy Racing Radiator, Gready turbo timer, Gready Profec B spec II boost controler, 7pt bolt in rollcage, Sparco seat and 4 pt harness, momo stearing wheel, Gready boost gauge, Gready oil filter relocation kit, Tomi fuel pressure regulator, and gready lightend pulley kit.
I may have left out one or 2 things but thats about all of it. I don't know the extent of the dammage to the head or piston but it is only the #4 cylinder. Still the stock turbo on the car. With a new head and valves I'm sure it would be a strong contender.
Call or email Jim at 530-741-3311 or [email protected] for questions or inquires. Selling price is $5500 for complete. Ask for parting out. First come first serve. Norther california people are perfered. I am located in Marrysville, CA 36 miles north of Sacremento off of interstate 70. Thanks
Jim
Also, it is a 89 fastback with 5speed. I am selling this for much less than what I have invested which is near $15000. Pictures can be seen on imagestation.com under PAnut240's 180sx/SR20det conversion. Here is the link www.imagestation.com/album/pictures.html?id=4289515067 Later
Well I finally had enough. Due to a shitty machine shop I have broken a new exhaust cam and dropped a valve. So, I am now selling as a whole, or parting out if nescarry, my 240. Here is what it has,
red top SR20det, Border fuel rail with 850cc injectors, Tien HA suspension, Tanabe race medalion exhaust, gready 3" down pipe, enjuku racing bottom mount exhaust manifold, HKS BOV, Skyline GTR FMIC, Gready Intake manifold, BeeR valve cover, Ferra dule valve spring kit with titanium retainers, HKS 264 intake cam, Gready rocker arm stoppers, JE pistons, Eagle Rods, Findanza lightweight flywheel, ACT stage 2 street clutch, Enjuku racing 1peice driveshaft, Spair welded diff., OBX front and rear strut tower bars, Type X tail light conversion, East Bear headlight conversion, Greedy Racing Radiator, Gready turbo timer, Gready Profec B spec II boost controler, 7pt bolt in rollcage, Sparco seat and 4 pt harness, momo stearing wheel, Gready boost gauge, Gready oil filter relocation kit, Tomi fuel pressure regulator, and gready lightend pulley kit.
I may have left out one or 2 things but thats about all of it. I don't know the extent of the dammage to the head or piston but it is only the #4 cylinder. Still the stock turbo on the car. With a new head and valves I'm sure it would be a strong contender.
Call or email Jim at 530-741-3311 or [email protected] for questions or inquires. Selling price is $5500 for complete. Ask for parting out. First come first serve. Norther california people are perfered. I am located in Marrysville, CA 36 miles north of Sacremento off of interstate 70. Thanks
Jim
Also, it is a 89 fastback with 5speed. I am selling this for much less than what I have invested which is near $15000. Pictures can be seen on imagestation.com under PAnut240's 180sx/SR20det conversion. Here is the link www.imagestation.com/album/pictures.html?id=4289515067 Later