Power FC or JWT ecu??

[4U2NV]

Ok im new to the site, i tried searching and coulnt find a good answer so i will just ask it. I just instaled my red top sr20det in a s13, i curntly have a greddy FMIC, and im putting a t3/t04e with topmount manifold, and i will most likely have to run something like 740cc injectors and a z32 maf. So how hard is it to tune the apexi fc to what i need. im ok with computer shit but not the best. but i am good with cars and engines. or should i go with a tuned ecu? I really just need to know how hard the apexi fc's are to use or understand and tune it? thanks

[wootwoot]

Microtech is nice and super easy but it will cost you a bit more and the wiring and such. I dont know much about power FC so I cant help you there but a tune from JWT is not your best bet. If you want a rom tune go with Scott from Enthalpy. Can find him on tamparacing.com or freshalloy.com

[sr240mike]

2nd for enthalpy. He will set you up right the first time. He's also on AIM at enthalpy1200

[KoukiMonster]

go through enthalpy.

he has dyno charts as proof that his tuned ecu's are much better then jwt's

[kandyflip445]

+1 enthalpy