z32 tt wheels on s13

[1 88 U]

I've searched and failed to find what setup is required to run these wheels with five lug swap and tein he.

[orion::S14]

Spacers...

Fronts are 16X7.5, +45...and will rub with any decent sized tire...the rim may even hit the coilover with that high offset.

Rears fit fine (16X8.5, +35), even with 245/45-16s...

- brian

[nlzmo400r]

^^^he's right, my rears are 16x8.5 with a 37offset and running 245/45 yoko's and they fit flush with slight camber. My rears are 16x7.5 with only a 22 offset and 225/45 and they have to have about 1.5 degrees of camber to tuck them in, or atleast sit flush. i dont run much camber on the street, so mike poke out the fender about 1cm or so.

[1 88 U]

Spacers...

Fronts are 16X7.5, +45...and will rub with any decent sized tire...the rim may even hit the coilover with that high offset.

Rears fit fine (16X8.5, +35), even with 245/45-16s...

- brian

If I run spacers, whats the minimum I could get away with. thanks

[mhjrSR]

Does anyone have pics of how the Z rims would look on a s13?

[mbmbmb23]

http://www.zilvia.net/f/vbgarage.php?do=view&id=3044

[1 88 U]

someone please, more details

[yudalicious]

hey yo, like I said, instead of getting 5 lug swap and spacers, you might want to think about just getting the 4 lug->5 lug adapters, which will solve both problems in one simple solution, here's a link:

http://www.wheeladapters.com/wheel_adapters_and_wheel_spacers.asp

[kuruptR]

I had them on my car with 25 mm spacer... they look really good with 25mm spacer.

The fronts will not work, i tried so hard to get them to work... they are just way too sucked in... even with a 6mm spacer they wouldnt clear my tein he's. I think i may try to raise the coilover but i dont think it will do much ... i cant remember if it hits the lower lock coller.

it sucks because there are limited amount of wheels that clear the stupid big brakes