USDM s14 kouki foglight VS. JDM s14 kouki foglight

[bb6]

Are the JDM and USDM S14 Kouki Foglights the same? Does the JDM front Bumper come with those black covers around the foglights? if not, where can they be sourced?

[projectRDM]

Not the same from what I've seen on Ebay.

[SimpleS14]

They are not the same and the black covers come with the foglights.

[KOUKI KA-T]

Not the same?? They are IDENTICAL, I have them both. Only difference is the metal bracket they mount to the bumper with. The actual fog light is the same, but you'll never find just the bracket (or black surrounds) which is why you'll end up having to buy the whole foglight assembly anyway. Too bad some of these importers wouldn't just grab the bracket and save people a lot of money, but then again they wouldn't be making any money, unless they charged like 50$ for that piece of metal....

[SimpleS14]

Not the same?? They are IDENTICAL, I have them both. Only difference is the metal bracket they mount to the bumper with. The actual fog light is the same, but you'll never find just the bracket (or black surrounds) which is why you'll end up having to buy the whole foglight assembly anyway. Too bad some of these importers wouldn't just grab the bracket and save people a lot of money, but then again they wouldn't be making any money, unless they charged like 50$ for that piece of metal....


Don't forget the bolts on the bottom...they are not the same.

http://mason.gmu.edu/~ggaisey/tmp/fogbolts.jpg

Left is USDM

[FRpilot]

^ that metal bracket. can't u just buy a piece of metal and fabricate it (bend and drill holes)

[KOUKI KA-T]

^ that metal bracket. can't u just buy a piece of metal and fabricate it (bend and drill holes)

Yes you can, very easily.

EDIT: But you would still need the black surround pieces or else it would look like crap.

[OptionZero]

anyone ever retrofit projectors into the kouki foglight housing...maybe plucked from a zenki housing

[FRpilot]

hid fogs. that would be sw33t!

[SimpleS14]

anyone ever retrofit projectors into the kouki foglight housing...maybe plucked from a zenki housing

Funny you ask that....because that's exactly what I did. I took the projectors from zenki foglights and put them into the kouki housing....

http://members.aol.com/sg1210/jam.jpg

http://members.aol.com/sg1210/fixl.jpg

http://members.aol.com/sg1210/fog_night1.jpg


As for the JDM foglights that I have...I'm just going to use some amber HELLA bulbs.

[OptionZero]

how hard was the retrofit, any cutting/retooling required, or mainly just a simple bolt on and some trimming?

What size bulb is a zenki fog? I kno a kouki is an h3

[cookie]

Bumping because i would like to know the last questions as well.

C.

[cookie]

bump still want to know.

C.

[SimpleS14]

Bulb size is H3 55W

[theicecreamdan]

i've taken apart zenki projectors, and I used to have kouki fogs, I imagine it would take a lot of cutting and some basic fabrication.

[Dnrkouki25]

So can the jam kouki fogs fit the oem kouki bumper

[bigs]

^You'll need the USDM brackets.

I've got some for sale if anyone needs them.