Shop in Bay Area, CA that presses S14 ball joint?

[rspec7]

Anyone recommend a shop near Milpitas, Fremont, San Jose in California that can press s14 ball joints into s13 front control arms QUICKLY, and INEXPENSIVELY?

[Brian W.]

You shouldnt have to use a press for this. Simply take the snap ring off and use a hammer.

[derux]

the parts house on fremont blvd wil do it.

[95Blue240sx]

Any shop can do it. As long as they have a press theres not problem. I took mine to a place my co-workers recommended and they did job. no complaints.

[FRpilot]

Any shop can do it. As long as they have a press theres not problem. I took mine to a place my co-workers recommended and they did job. no complaints.

how much was it?

[iggy]

bayside transmissions in palo alto will do it for yah.. or you could just use a hammer.. be careful though, those ball joints are uber sensitive..

[95Blue240sx]

Mine were done free. But it should cost about $30 total. Willard auto on alumrock and capitol ave.

[95zilvia]

take out the c-clip
spray wd-40
hammer the shit out of it

do the reverse to put in new BJs

free nigga

i just did all this shit yesterday, and i even ordered 2 sets of ball joints, so if u need s14 ball joints, moog, brand new, hit me up on PM

[95Blue240sx]

I've done tried to hammer it out. It doesnt always work, thats why i took mine to a shop to get pressed. If you mushroom the old balljoint theres no going back. just take it to someone with a press. Using a BFH might work, but its not worth the pain.

[rspec7]

thanks for the excellent responses everyone