PDA

View Full Version : power question


smithers584
12-30-2004, 03:42 PM
hey guys i am fairly new to the 240 seen. I got sick of paying for my Audi A4 and sold it and bought a 240 with intentions of doing a sr20det swap on blind faith. Ive never driven a car with the swap or riden in one but i bought a 95 240 se and the sr20det. I am hoping you can give me an idea of what kind of power i would be looking at with these mods:

apexi safc II
apexi avcr
Spearco FMIC
apexi N1 single
3 inch downpipe
hks ssqv bov
ACT street/Strip clutch
z32 MAF
walbaro 255 fuel pump
nismo motor/tranny mounts
hks type 1 turbo timer

Ive already purchased a few and am planning on purchasing the rest and having the swap done at EPIK motorsports on the 15th of jan. I just want to make sure when it comes out of the shop i am going to have the power i want for a start, hopefully keeping up with or beating stock evos and wrx's and srt-4's. any advice would be appreciated. thanks

mike13
12-30-2004, 04:06 PM
you'll be looking at AT LEAST 90-92 horsepower to the wheels.

StupidGreen87
12-30-2004, 04:13 PM
*cough*14 years old*cough*

MakotoS13
12-30-2004, 04:18 PM
yeah he might even break 100 with all that stuff! don't forget to drift, that's extra power.

IGSDann
12-30-2004, 05:08 PM
I'm thinking that Walbro fuel pump will add at least 300 horsepower and the turbo timer is just as good as boring the cylinder, expect an extra 100 horsepower at the least!

smithers584
12-30-2004, 05:49 PM
wow thanks for the help, sorry that i dont know a lot about it, i thought thats what these forums were for but apparently you'd rather be jerks about it. I figured some would have similar mods and probably already dynoed and im not stupid i know what mods make power and what mods are essential but i just listed them all. thanks again for the help

po1z5che__
12-30-2004, 05:52 PM
wow thanks for the help, sorry that i dont know a lot about it, i thought thats what these forums were for but apparently you'd rather be jerks about it. I figured some would have similar mods and probably already dynoed and im not stupid i know what mods make power and what mods are essential but i just listed them all. thanks again for the help
lol..this is GOLD

mr_240sx
12-30-2004, 06:23 PM
id say youd be towards 250rwhp

ledzeppelin240
12-30-2004, 06:31 PM
Stock is only 180 or so RWHP I thought. So your saying he will gain 70 RWHP with that??

smithers584
12-30-2004, 06:32 PM
thats right around what i was hoping for. Thanks Mr. 240sx

ZK
12-30-2004, 07:09 PM
I'd say more like 200 RWHP. Stock SR is like 160 RWHP. Remember, this is Wheel horsepower, different than manufacturer rated HP.

fliprayzin240sx
12-30-2004, 07:26 PM
1 Bar on the T25 should gain roughly 250 to the wheels with proper tuning.

smithers584
12-30-2004, 08:09 PM
yeah well i am taking it to epik motorsports in myrtle beach, south carolina, and Jeff there said it would be set at 1 bar and tuned on the dyno. i guess ill post the dyno sheets when it comes out of the shop.

mrmephistopheles
12-30-2004, 08:21 PM
Be nice, fuckers.
You're looking at over 200whp. Without more info, etc there's no way to defintively say what power you'll be making.