help, what are the H light harness bulbs?

[snp_ethan]

hi, well I WAS TRYING TO pull out the headlights to check whatw kind of bulbs it needed but the damn thing wouldnt come off so i looked in the chilton manual but still nothing

could anybody give me a hand plz?
thx

[kazuo]

Are you talking about "180sx" pop-up headlights?

If so, they are sealed beam, which means the whole "housing" is the bulb.

They're like 6053's or something. I dunno cus I don't have pop-ups. Might as well switch to H4 housing (search eBay for them)

S13/14/15 Silvia (S14 240SX) use like H1/H3/etc. Run a search and you'll find the info you need for those.

Good luck

[Jeff240sx]

'95-'96 are H4 (or 9003, same bulb). Highs are H4.
97+ are H1. Highs are 9005.
S15 front is H1. Check the FAQ for Mr.Meph's s13 silvia bulbs.
-Jeff

[snp_ethan]

thank you very much, now, is there any diagrams on how to actually replace them? cuz I wasnt able to open the H lidgh assembly

[PinkPanther]

look through your owner's manual, an FSM, or maybe Chiltons....its in there somewhere.

We could tell you exactly how to do it if you gave us a description of your car.

[kingsol]

you might as well just do an h4 conversion... stock lights mak me :barf:

[snp_ethan]

oops, iyeah forgot that, its a s14 zenki, pink panther I dont have the manual, donno what the FSM os, and I got the Chilton, but nothing in there...
on a second note, is there still the zilvia.net sticker cuz I wanted to get 2 but then, someone erased the sticky in for sale section...

[PinkPanther]

yeah, I just took a look at my Chiltons and its useless as far as headlights go, sry. FSM is a factory service manual, and they are very helpful and very in-depth; pick up one if you plan on fucking around with your own car and don't have access to mitchell-on-demand or ALLDATA.

[snp_ethan]

ok how do I get either one of them? (access to mitchell-on-demand or ALLDATA) or FSM

[PinkPanther]

All decent repair shops will have alldata and/or mitchell, so if you work at one or know someone who does than that should help you. If this is out of the question, than go look for an FSM for your S14 in the FS section of Zilvia, or on ebay.

-back to the actual problem: can you describe how the bulbs "wouldn't come out?"

[Jeff240sx]

s14 Zenki use the H4 bulbs. They are extremely easy to remove. Pop the hood, and right behind the headlight housing will be 2 wire harnesses leading into the housing. They really meet at the headlight bulb. To remove the bulb from the housing, rotate the outer ring, then twist the H4 bulb.
-Jeff

[omen2853]

yeah get the FSM. it shold be still available on this forum for download. just run a search for FSM download or something here.

[snp_ethan]

actually the probelm is that I cant open the assemby, the headlight in itself, so I havent been able to get to the bulb yet...so
this is how far I get:

1)pop the hood
2)see harness for the bulbs

thats it , I cantgo over that.. I know it sounds retarded, but I have changed bulbs for other cars but for some reason I cant open mine...
and the harnesses for the bulbs are attached and sealed to the assembly

thats it, what am i supposed to do?ill post pictures when I get my cam back

[projectRDM]

'95-'96 are H4 (or 9003, same bulb). Highs are H4.
97+ are H1. Highs are 9005.
S15 front is H1. Check the FAQ for Mr.Meph's s13 silvia bulbs.
-Jeff

Almost.

USDM Zenki is 9003(HB4) for low/high, 9005 for high.
EDM Zenki is 9003 for low/high, H1 for high.
USDM Kouki is H1 for low, 9005 for high.
EDM Kouki is H1 for both.

[LIE495 s14Q]

i happen to have user manual around. took few pic hoping it helps.

[LIE495 s14Q]

i have 2 more pic. but the server wont allow me upload more than 70kb of files total. i think. manual says "Inside(high beam) [wattage-65] [Bulb no. 9005(HB3)]" "Outside(High beam/Low beam) [Wattage-60/55] [Bulb no. HB2]"

[LIE495 s14Q]

Isn't my reply 4 months late? Doooh....

[snp_ethan]

lol actually yes, and im sorry im an ass by bringing this up again.