View Full Version : Clutch Master Cylinder, Buy New or Rebuild?
chnco
12-19-2004, 05:00 PM
Guys-
So my pedal is feeling pretty mushy and does not come up all the way off the floor. It seems that my master cylinder has tooken a dump on me.
Should I just rebuild it or buy a new one?
usctom
12-19-2004, 05:52 PM
buy a new oem one. there not that expensive.
Pacman
12-19-2004, 06:32 PM
Napa: $15 for new, $7.50 for a rebuild kit. I rebuilt mine, works fine.
OEM from the dealership is 100 dollars here! I paid 40 for mine at a local shop that had it in stock, since i needed it that day.
IGSDann
12-19-2004, 08:30 PM
Bought one on eBay- Raybestos OEM replacement- for about 33 shipped for my tranny swap. It works great.
ch1873857
12-20-2004, 04:52 PM
ive got a brand new one from nissan in the trunck of my car that i got for free from my uncles garage. make an offer if you want it
kazuo
12-21-2004, 01:39 AM
I rebuilt mine and it blew up. I know I'm stupid, but its not rocket science to rebuild.
SO I bought a new one and it works cool.
Maybe it's cus I used a Kragen rebuild kit and not OEM...
In conclusion:
- Buy a new one
OR
- Buy oem rebuild kit and rebuild.
kandyflip445
12-21-2004, 06:55 AM
I rebuilt mine and it blew up. I know I'm stupid, but its not rocket science to rebuild.
SO I bought a new one and it works cool.
Maybe it's cus I used a Kragen rebuild kit and not OEM...
In conclusion:
- Buy a new one
OR
- Buy oem rebuild kit and rebuild.
Did you hone the cylinder? If not, it may have worn on the cup seals and it wasn't sealing properly.
Pacman
12-22-2004, 11:31 AM
Did you hone the cylinder? If not, it may have worn on the cup seals and it wasn't sealing properly.
I didn't hone mine (doesn't that cause leaks anyway?) and it works fines. I do need to adjust the pedal, but was I suppose to hone it?
Jung918
12-23-2004, 01:17 AM
I got a oem rebuild kit and it works fine. I am buying a new slave though.
Pacman
12-23-2004, 02:55 PM
Anyone know if the NISMO slave is a big improvement? They're pricey, but are they worth it?
http://www.performancenissanparts.com/catalog/product_info.php?cPath=146_560_830&products_id=818
chnco
12-24-2004, 02:09 AM
Guys-
I rebuilt mine and it took a matter of 5 minutes. I got a new piston, seals, rubber boot, everything. Just make sure you grease everything correctly with the right grease, it makes a world of difference!
FRpilot
12-24-2004, 09:45 AM
Napa: $15 for new, $7.50 for a rebuild kit. I rebuilt mine, works fine.
thats pretty cheap. are u sure its not for a slave cylinder?
usctom
12-30-2004, 09:36 AM
Anyone know if the NISMO slave is a big improvement? They're pricey, but are they worth it?
http://www.performancenissanparts.com/catalog/product_info.php?cPath=146_560_830&products_id=818
the nismo one is just a z32 slave. Its just a bigger piston so easier pedal.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.