SOHC->DOHC Swap, Need some Pics from you DOHC guys!

[mike2016]

Ok I just bought a dohc motor set but it has cut harness at the engine bay plugs and interior plug(previous owner cut it for SR swap).

i know the interior plug just need to match the colors so thats fine.

can any of you DOHC guys take a picture of your engine bay plug, the big gray and brown plug near the battery.

I want to see the color layout.

I'll have to cut the plugs off my SOHC harness and connect it to the dohc harness, but the colors are different so I need to know the original orientation of the wires.

help me out guys, just some take some pics! :bowrofl: :bowrofl:

[Ritz S14]

http://www.zilvia.net/f/showthread.php?t=67178

I just love how you didn't even bother to search.

Your best bet is to pick up a DOHC harness. Fuck rewiring it yourself, cause more than likely you will scew up, just like the previous owner of my s13.

[mrmephistopheles]

there's this too. No pics though.
http://www.zilvia.net/f/showthread.php?s=&threadid=33502

[mike2016]

I did search and I've read all these , all I really need is a picture of the 2 plugs near the fuse box and I'm done.... all the threads I've searched came up with nothing about the 2 plugs, everyone just say it plugs right in and no re-wiring is nedded. so no one bother doing any write-up about it.


I have a dohc harness , it's just missing the 2 plugs because previous owner used it for sr swap.

[mrmephistopheles]

I gotcha.
Sorry I don't have access to any KA powered car out here. There IS a guy on the base with a 240sx coupe, but I don't know him well, and my japanese sucks.