Took off tranny and clutch preparing to put back on, pics

[sepulchral]

http://www.bizlocker.com/project240/2.htm

My questions are:

What will i need besides clutch allignment tool, lithium grease for TOB, transmission jack, and tranny oil?

And where can i find ALL the torque specs for a ka24de clutch/flywheel/transmission?

Mike

[kandyflip445]

Pressure plate is 16-22 ft/lbs.
Flywheel is 105-112 ft/lbs.

If you are looking from the back of the car TO THE FRONT. The top bolt on the bellhousing goin counter clockwise. 29-36, 29-36, 29-36, 29-36, 22-29, then there is a gusset, then 22-29, 22-29, 29-36. All in ft/lbs.

Good luck.

[sepulchral]

when you say 22-29 it can be anywhere between that?

[sepulchral]

Oh and thanks a lot man!

[kandyflip445]

Yep, anywhere between those two numbers.

[tak-]

nothing to contribute, except its cool when people log what they do, especially with pictures. it does help some people out who are in jams & need to see what others did. peace

[sepulchral]

thanks................ msglngt

[mellojoe]

PS: I like the "safety" tips. This is seriously heavy stuff, here. Drop a tranny and you're pretty much screwed if it lands on you in any way. Please be safe.

[SirWarrior]

any chance i can get those specs for S13 blacktop SR???
i am at the same place as he, but with the SR.
thanks

[sepulchral]

any chance i can get those specs for S13 blacktop SR???
i am at the same place as he, but with the SR.
thanks

what specs do you need, torque specs? do a search