PDA

View Full Version : 5 bolt VLSD axle.

95zilvia
12-14-2004, 05:14 AM
Mine's broken, what other ones can I use?
S14 stock?
S13 stock?

Which ones are 5 bolt, and which ones are the thicky thick kind?

And also, I need to use the z32 TT nuts/bolts right?
Bone
12-14-2004, 07:42 AM
J30, and Z32 are 5 bolt. S14 and S13 are 6 bolt. The 5 bolt axles require J30 bolts or z32 bolts you can by them from Nissan but they are $90! Not sure what you meant by thicky thick kind?
projectRDM
12-14-2004, 08:58 AM
J30, and Z32 are 5 bolt. S14 and S13 are 6 bolt. The 5 bolt axles require J30 bolts or z32 bolts you can by them from Nissan but they are $90! Not sure what you meant by thicky thick kind?

Early J30 are 5bolt. 95-up are 6bolt.
Bone
12-14-2004, 11:21 AM
Early J30 are 5bolt. 95-up are 6bolt.Uh the 95 I pulled mine from was 5 bolt. 96 up could be 6 as I have no experience with those years.
kazuo
12-14-2004, 12:12 PM
FWIW you can also use R32/33 Axles. Dunno if R34 would work.

Z32 axles won't fit, theyre too long IIRC.
Toahk
12-14-2004, 01:59 PM
Give me and email, which side do you need?
[email protected]
95zilvia
12-14-2004, 03:07 PM
emailed ur ass
95zilvia
12-15-2004, 09:01 AM
but my 5 bolt axles came with an lsd that bolted right up into the s13? now im confused, and i still need that axle!
nissandr1ft
12-15-2004, 10:19 PM
you must have got one the N/A 300zx diffs, or the earlier J30 diff. I have a set of 5 bolt axle for sale. Email me with an offer if your interested.
nissandr1ft
12-15-2004, 10:22 PM
My axles are from a N/A Z32, and they will work on an S14 but not an S13. The Z32 axles are a little longer than the S14, and the S14 are a little longer than the S13.
95zilvia
12-16-2004, 09:03 AM
Maybe I got a JDM s13 diff with 5 bolt axles? is that another possibility?
Toahk
12-16-2004, 10:17 AM
Yes, and I didn't get your email. Can you try sending again?
Bone
12-16-2004, 11:01 AM
See I am really Confused now because form my understanding the J30 was the same length as Z32?!? If that is the case I have had this VLSD in both my S13 and S14 and had no problems with axle length on either.
AKADriver
12-16-2004, 01:36 PM
Your understanding was wrong, J30 axles are shorter than Z32... approximately the same length as S13 or S14.

95zilvia, you most likely have a JDM S13 diff, yes.