Nismo Transmission Mount for S13

[95zilvia]

I tried to install this used NIsmo mount that I bought used, and found out that I needed a lot more than just the actual mount. When I bought it, I didn't know that it needed any other nuts/bolts or whatever, and I tried to put it on, and it was definately missing a few parts.

What I'm asking is, does anyone have a write-up or pictoral thingie on how to install? Or even a picture of all the parts that compose the Nismo tranny mount.

[nismojunkie]

Take what you have to the NISSAN dealer and go to the parts counter.
They should be able to look up any and all parts needed.

I'm lucky, cuz the NISSAN parts guy here is a 240 nut :)

[projectRDM]

I tried to install this used NIsmo mount that I bought used, and found out that I needed a lot more than just the actual mount. When I bought it, I didn't know that it needed any other nuts/bolts or whatever, and I tried to put it on, and it was definately missing a few parts.

What I'm asking is, does anyone have a write-up or pictoral thingie on how to install? Or even a picture of all the parts that compose the Nismo tranny mount.

The Nismo mount is identical to the OE mount, just a stiffer rubber. You should use all your existing hardware on the car. Nothing additional is required.

[fliprayzin240sx]

Should be cake, support the tranny on jacks, unbolt the tranny cross member off the chassis, remove cross member off the stock mounts and there should be 2 more bolts holding the mount onto the tranny.

[95zilvia]

Ok I know how to install it. All i want is a picture of all the parts that came in the box!

[projectRDM]

There are no parts. You use your existing hardware.