vvtisupra
12-08-2004, 01:49 PM
Its practically ready to run in like 15 min. All you need to do is hard wire some 6 cell batteries which i will include brand new. And i am willing to trade for s13 parts. Aero, quick release +cash,electric fans etc.
The Car
Original RS4 Sport
-bearing kit
-front ball diff
-rear sway bar
-almost new spur gear and a bunch of pinion gears for different gear ratio
-kawada slicks mounted on kawada rims
- comes with acura type R shell and nsx shell (type r was my race shell nsx needs new holes drilled for mounting, beater shell)
-alloy oil filled shocks not the sport plastic gay ones
-misc spare parts matched springs helped set up by a tamiya champion contender
* never crashed this car hard enough to snap any parts ( I was a pretty damn good driver back in my days :wink:
Electronics
-airtronics rival sport controller
-GM racing V12 used for approximately 12 practice laps around camarillo track and a few in the tamiya championship race *hardwired (retrail 180 new)
-hitec mini receiver (*almost the size of a quarter)
-2 motors (10 turn gem motor*needs new brushes can hit about 30+ mph depending on gearing) (peak stock raven -
beater engine use to be my race motor but doesn;t compete with the
new stock motors *use to run stock class if you are a good driver you can compete, needs new brushes)
- a few beater packs 2 unused
- two race packs brand new 2200 mah peak performance cells
(one is dissassembled will comes with trinity bars (never got to
assemble them, and one stick pack untouched) These were
untouched because i met a guy from ucsb that let me use his spare
3300 mah cells )
-close to brand new vision peak 2 peak charger. Does both nicad and nimah at different charge rates. Comes with adapters for the clips for hardwired batteries (used only about 6 times comes with box and papers and even the spare fuse)
-cirus high torque servo
I've probably invested close to 600 dollars on this car im letting it go for 225 obo.
things that should be touched up for competition.
- new brushes or new motor
- new tires you can buy the drifting tires and turn it into a drift rc car
(drift rc car needs less expensive parts but better driving skill)
- new crystals for radio
http://img.photobucket.com/albums/v425/StickThatClutch/Image014.jpg
http://img.photobucket.com/albums/v425/StickThatClutch/Image008.jpg
http://img.photobucket.com/albums/v425/StickThatClutch/Image009.jpg
http://img.photobucket.com/albums/v425/StickThatClutch/Image010.jpg
http://img.photobucket.com/albums/v425/StickThatClutch/Image011.jpg
http://img.photobucket.com/albums/v425/StickThatClutch/Image013.jpg
The Car
Original RS4 Sport
-bearing kit
-front ball diff
-rear sway bar
-almost new spur gear and a bunch of pinion gears for different gear ratio
-kawada slicks mounted on kawada rims
- comes with acura type R shell and nsx shell (type r was my race shell nsx needs new holes drilled for mounting, beater shell)
-alloy oil filled shocks not the sport plastic gay ones
-misc spare parts matched springs helped set up by a tamiya champion contender
* never crashed this car hard enough to snap any parts ( I was a pretty damn good driver back in my days :wink:
Electronics
-airtronics rival sport controller
-GM racing V12 used for approximately 12 practice laps around camarillo track and a few in the tamiya championship race *hardwired (retrail 180 new)
-hitec mini receiver (*almost the size of a quarter)
-2 motors (10 turn gem motor*needs new brushes can hit about 30+ mph depending on gearing) (peak stock raven -
beater engine use to be my race motor but doesn;t compete with the
new stock motors *use to run stock class if you are a good driver you can compete, needs new brushes)
- a few beater packs 2 unused
- two race packs brand new 2200 mah peak performance cells
(one is dissassembled will comes with trinity bars (never got to
assemble them, and one stick pack untouched) These were
untouched because i met a guy from ucsb that let me use his spare
3300 mah cells )
-close to brand new vision peak 2 peak charger. Does both nicad and nimah at different charge rates. Comes with adapters for the clips for hardwired batteries (used only about 6 times comes with box and papers and even the spare fuse)
-cirus high torque servo
I've probably invested close to 600 dollars on this car im letting it go for 225 obo.
things that should be touched up for competition.
- new brushes or new motor
- new tires you can buy the drifting tires and turn it into a drift rc car
(drift rc car needs less expensive parts but better driving skill)
- new crystals for radio
http://img.photobucket.com/albums/v425/StickThatClutch/Image014.jpg
http://img.photobucket.com/albums/v425/StickThatClutch/Image008.jpg
http://img.photobucket.com/albums/v425/StickThatClutch/Image009.jpg
http://img.photobucket.com/albums/v425/StickThatClutch/Image010.jpg
http://img.photobucket.com/albums/v425/StickThatClutch/Image011.jpg
http://img.photobucket.com/albums/v425/StickThatClutch/Image013.jpg