NC ||| Garage Clean Out | S13 / S14 / KA24DE | OEM, Engine, Trans, Interior, Trunk +

[Ripzsaur]

Varying prices and condition, lots of parts, not all of them listed. Ask for more pictures and info on each part. Shipping available on some items. Prices may be negotiable, parts will be cleaned prior to shilling

Engine:
||||||||||||||||
KA24DE - Block - $75
KA24DE - Complete head - $100
KA24DE - KA24DE Oil Pan (center dent, untested, $10 or free with engine block)
KA24DE - Valve Cover [1 Gold, 1 metal finish] - 20 per
KA24DE - Complete Intake Assembly - 80
KA24DE - Intake manifold - 20
Aftermarket AEM Intake - $20
Timing Chain, new in box - $5 per
KA24DE timing covers - $20 per
Used OEM Engine Mounts (2 sets) - $30 per set
AC Compressor (not seized)
Altenator [x2] - $35 per

Transmission/Drivetrain
||||||||||||||||
Manual Transmission crossmember [2 available] - $50 per
Aftermarket MT Crossmember (needs drilling) - $10
OEM S14 Rear Axles - $50
MT Driveshaft - $100
Manual transmission gussets - $30

Interior
||||||||||||||||
Cluster surround with cruise control S14 - $40
Center Console S14 - $40
ECU Kick Panel S14 - $25
S14 Door Panels - $200
Chipped and cracked AC Control Unit S14 - $10
OEM S14 Radio (nonworking cassette) - $15

Exterior
||||||||||||||||
S14 Passenger side headlight - $30
S14 Trunk with Arms and tension rods - $175
S14 trunk latch pin - $40

I?ll add more as I go, anything not listed ask about.

NO TRANS, NO AFTERMARKET COMPONENTS EXCEPT A FEW SMALL EXCEPTIONS; ALL ITEMS ARE USED AND UNTESTED BUT IN GOOD COSMETIC CONDITION.
https://uploads.tapatalk-cdn.com/20201009/ee672245c94f3f24126d2400eebced1e.jpg

https://uploads.tapatalk-cdn.com/20201009/f0510510ee4fce3726cff9ffd42f96a2.jpg
https://uploads.tapatalk-cdn.com/20201009/1b75b5a1eabf0e82a64dfd88ab95345a.jpg
https://uploads.tapatalk-cdn.com/20201009/4002e7692106a723dae828489489dfd1.jpg
https://uploads.tapatalk-cdn.com/20201009/1a1e6b69c7af33ea61a316047d9d1647.jpg
https://uploads.tapatalk-cdn.com/20201009/b95e6c6ca6c54261a65f6d4194197b40.jpg

[Hileli]

Your PMs are full but I am interested in the door panels and intake do you have any shots of the panels. Also I am in Charlotte, will you do local meetup?

[rogues13]

I'm interested in the block. You can text me at 828-502-9358

[Ripzsaur]

PMs cleared. Yes I can do local meetup. Charlotte is an hour and a half from me, we could meet somewhere near Salisbury NC.

Pics:https://uploads.tapatalk-cdn.com/20201009/d66a71ff2ed2413ba665c13ed71ec841.jpg
https://uploads.tapatalk-cdn.com/20201009/34fb3c6b38ef6104f958ee0bd0fc3164.jpg
https://uploads.tapatalk-cdn.com/20201009/b3cf88b4f26eebac6f4bd7dc71a8c898.jpg
https://uploads.tapatalk-cdn.com/20201009/e5de7060a522093b4c24877f390c825e.jpg
https://uploads.tapatalk-cdn.com/20201009/feb98d5d58d5705ab103f92ff25572b8.jpg
https://uploads.tapatalk-cdn.com/20201009/c072f29b6ed829d086c4e270422d4fa8.jpg
https://uploads.tapatalk-cdn.com/20201009/672abda1a7e9c9458c3051e8c91a748c.jpg

[importdude]

pic req up close picture of front and back of timing covers
thanks