PDA

View Full Version : FL Sleeved VQ35 block, BC stroker crank...


itsjustdaphne
08-11-2020, 07:16 AM
Mazworx billet main caps ($400)
Dynosty billet main girdle ($300)
Boundry billet oil pump gears ($400)
Arp main studs ($175)

Bc stroker crankshaft ($3400)
Crank was cut 10thou on rod and main journals and renitrided by mile high crankshafts in colorado.

Vq35de block with darton sleeves in it. Bored to 95.5mm bore. Sleeves can go up to 100mm bore. The stroker crank uses standard size vq rods. Will need custom stroker pistons from BC. The block will need to be line bored for the billet mains. (Sleeve cost is $1150 plus install)

Asking $3000 Shipped

Selling because sold my 350z and bought a 2jz e46

This is a very good starting platform for someone wanting to build a stroker/ Sleeved Vq.

https://scontent-bos3-1.xx.fbcdn.net/v/t1.0-9/p720x720/117111704_10223931268413126_5272636300196341133_o. jpg?_nc_cat=107&_nc_sid=843cd7&_nc_ohc=p8TzM1HP140AX8boOOB&_nc_ht=scontent-bos3-1.xx&_nc_tp=6&oh=3b5962e06ab300b2370b54965b4ba87c&oe=5F58A5BA
https://scontent-bos3-1.xx.fbcdn.net/v/t1.0-9/p720x720/116467959_10223931269853162_8300950259370270749_o. jpg?_nc_cat=102&_nc_sid=843cd7&_nc_ohc=Xw9eD-AW5VcAX8XOgnq&_nc_ht=scontent-bos3-1.xx&_nc_tp=6&oh=72e56dc470d78b13ce0087bf888c7da3&oe=5F57D7F6
https://scontent-bos3-1.xx.fbcdn.net/v/t1.0-9/p720x720/116709549_10223931268813136_7983331239743205264_o. jpg?_nc_cat=110&_nc_sid=843cd7&_nc_ohc=8igQm1rYJwgAX8L8ybJ&_nc_ht=scontent-bos3-1.xx&_nc_tp=6&oh=cb622869a76853edf493424d18d5cc15&oe=5F596AD5
https://scontent-bos3-1.xx.fbcdn.net/v/t1.0-9/p720x720/116721009_10223931268653132_5487532703487522455_o. jpg?_nc_cat=103&_nc_sid=843cd7&_nc_ohc=Yw-6vuDAcHUAX9Zfb71&_nc_ht=scontent-bos3-1.xx&_nc_tp=6&oh=132344c8b65c2a56ce3c07dc49955f1a&oe=5F570B57
https://scontent-bos3-1.xx.fbcdn.net/v/t1.0-9/p720x720/116253391_10223931268213121_3630318877026769774_o. jpg?_nc_cat=108&_nc_sid=843cd7&_nc_ohc=oYwRsMLjVtoAX-2TE-G&_nc_ht=scontent-bos3-1.xx&_nc_tp=6&oh=8c18ac96665084083d797bb26f8c5bde&oe=5F592022
https://scontent-bos3-1.xx.fbcdn.net/v/t1.0-9/p720x720/116799079_10223931269733159_1923754097588781527_o. jpg?_nc_cat=110&_nc_sid=843cd7&_nc_ohc=kJ_idSvOd0cAX_Sf2L-&_nc_ht=scontent-bos3-1.xx&_nc_tp=6&oh=27188d3eef7bfeb72403a3a7ca67b9ab&oe=5F582ADD
https://scontent-bos3-1.xx.fbcdn.net/v/t1.0-9/p720x720/117183811_10223931270013166_8989182129192775956_o. jpg?_nc_cat=101&_nc_sid=843cd7&_nc_ohc=PbZyWyVzKI4AX--VK_i&_nc_ht=scontent-bos3-1.xx&_nc_tp=6&oh=b0deebed76c1c20a3a055ea224295b34&oe=5F56A130

itsjustdaphne
08-21-2020, 07:32 AM
bump, make offer