vqpwrd240
06-08-2020, 06:12 PM
I basically have most of the parts to do the swap but I am now considering going a different route. So, this is more of a feeler for now.
I started to tear the engine down so I can freshen is up without opening it up to rebuild it. So, currently it is a long block with all the accessories removed. I have not even taken the plugs out or removed the valve covers. I also have not steam cleaned it yet. For the parts I have removed, all are organized and nuts and bolts are in labeled bags. Engine has a little over 100k miles but does have the stronger connecting rods. I would recommend changing the plugs, valve cover gaskets, timing belt and tensioners before putting it all back together. I have an uncut wiring harness as well but no ECU. I somehow lost it.
As for the swap kit, I got most of it from Collins Adapters to use with a 350Z/370Z transmission with Stage 4 clutch. The only things still needed are listed below.
6 speed transmission
transmissionmount/crossmember
Shortened shifter assembly
driveshaft
I have about 2500 in everything. Looking for 2000.
Open to certain items for trade listed below. May consider other things but this is all I can think of for now.
-Quality fabrication work
-Extra clean, no rust, West Coast or Southern States 1995 Maxima (auto)
-Good condition, little to no rust S13 or 1995 S14
-Good condition, hasn't been dropped 600cc or higher bike
Contact info: 847-220-38 four one or [email protected]
Thanks,
Ferhan
Now the for pictures.
https://imageshack.com/i/pm0apVwHj
https://imageshack.com/i/poHTDSk8j
https://imageshack.com/i/pmTMXbzXj
https://imageshack.com/i/pmuWEHbEj
https://imageshack.com/i/polz6oXuj
https://imageshack.com/i/pm06aT46j
https://imageshack.com/i/poh2XOOQj
https://imageshack.com/i/poh2XOOQj
https://imageshack.com/i/pmvvyDC1j
https://imageshack.com/i/pmy5Uhpdj
https://imageshack.com/i/pm5uCSIaj
https://imageshack.com/i/pnwOjBuJj
https://imageshack.com/i/pnF3znR3j
https://imageshack.com/i/pmpZw3Nhj
https://imageshack.com/i/pme6t4Zuj
https://imageshack.com/i/pmGLZE52j
https://imageshack.com/i/pmPW2yD4j
I started to tear the engine down so I can freshen is up without opening it up to rebuild it. So, currently it is a long block with all the accessories removed. I have not even taken the plugs out or removed the valve covers. I also have not steam cleaned it yet. For the parts I have removed, all are organized and nuts and bolts are in labeled bags. Engine has a little over 100k miles but does have the stronger connecting rods. I would recommend changing the plugs, valve cover gaskets, timing belt and tensioners before putting it all back together. I have an uncut wiring harness as well but no ECU. I somehow lost it.
As for the swap kit, I got most of it from Collins Adapters to use with a 350Z/370Z transmission with Stage 4 clutch. The only things still needed are listed below.
6 speed transmission
transmissionmount/crossmember
Shortened shifter assembly
driveshaft
I have about 2500 in everything. Looking for 2000.
Open to certain items for trade listed below. May consider other things but this is all I can think of for now.
-Quality fabrication work
-Extra clean, no rust, West Coast or Southern States 1995 Maxima (auto)
-Good condition, little to no rust S13 or 1995 S14
-Good condition, hasn't been dropped 600cc or higher bike
Contact info: 847-220-38 four one or [email protected]
Thanks,
Ferhan
Now the for pictures.
https://imageshack.com/i/pm0apVwHj
https://imageshack.com/i/poHTDSk8j
https://imageshack.com/i/pmTMXbzXj
https://imageshack.com/i/pmuWEHbEj
https://imageshack.com/i/polz6oXuj
https://imageshack.com/i/pm06aT46j
https://imageshack.com/i/poh2XOOQj
https://imageshack.com/i/poh2XOOQj
https://imageshack.com/i/pmvvyDC1j
https://imageshack.com/i/pmy5Uhpdj
https://imageshack.com/i/pm5uCSIaj
https://imageshack.com/i/pnwOjBuJj
https://imageshack.com/i/pnF3znR3j
https://imageshack.com/i/pmpZw3Nhj
https://imageshack.com/i/pme6t4Zuj
https://imageshack.com/i/pmGLZE52j
https://imageshack.com/i/pmPW2yD4j