FS: Parting out 95' S14 Base

[Bone]

I bought this car for the headlights and a few assorted other parts. So in short:
No Headlights
No Corner Lights
No radio trim (interior trim was riced with Yellow paint so most trim is no good)
No Radio (does have SE radio amp and A pillar tweeters)


This is a complete car with an auto tranny other than the above mentioned parts. Interior is a green shade kinda hard to tell though until you see it against another color (if that makes since) Dash is perfect. Car has 113,000mi motor is fried it was overheated and seems to have collapsed the rings. Passenger side has a crease all the way down it. front fender is not in good shape. Door is fixable if you need it bad enough. Rear quarter is as bad as front fender. It is a very defined crease all the way down the side so most passenger side body parts are FUBAR'd. Please do not PM I will check this thread regularly.

Make offers

[edpogi]

how much for the wireharness?

[019]

do you have the passenger side turn signal?

[supportTHEezln]

Driver side pillar, and the bumper price plz.

[Black240sx]

turn signals please.... price shipped ot CA 92821

[rainier]

power window switch shipped to san diego 92126. how much?

[Raine]

prices shipped to 91789 - if you can email me at [email protected] thanks in advance

1) rear interior side panels (if the color is dark gray)
2) battery mounting bracket (if un-damaged) + hardware

[synergy_motorsports]

is the carpet nice? how much shipped to atlanta 30096?

Thanks

[snp_ethan]

power window motor for driver side to ca 90019?

[Bone]

Come on guys need to get this thing out of here.

[maxim240sx]

Hey is it a stick,if so how much for the shifter trim ring and shifter boot shipped to oklahoma 73170? thanks

[Bone]

Sry its an auto.

[d-wade]

I am interested in both drivers side and passenger side inner door handles/pull handles. What color is the plastic?

[Bone]

They have both been painted yellow. The girl I got the car from pretty much destroyed all the commonly broken plastic in the interior with paint. Such as radio trim, door pulls, middle vent trim and console lid. Sry I have some that have the bottom screw hole broken out, That is the only thing wrong with them. If yours are worse make me an offer and we will work something out.

[grndzro26]

how much for the front spindles without the hubs shipped to 94520?

[zero.counter]

Looking for the Trunk carpet, power antenna, washer fluid pump, the caps that cover the bolts for the removal of the rear bench seat.

[Bone]

PM's sent still alot of parts left.

[spiv99]

Looking for the front radiator support. This includes the top rail where the a/c stickers are at and the three bars running down that hold the horns and latch assembly. Shipping will be to 47714. Thanks, Casey



PM's sent still alot of parts left.

[Bone]

PM sent front support is perfect. Give me a reasonable offer.

[574-240sx]

What color is the exterior. Power windows?

[Bone]

Emarld Green and I do have the window switches and motors with tracks glass and yahta yahta!

[574-240sx]

Thats the color I'm looking for. Do you still have the driverside door?

[BlackSilvia96]

Sent PM!! Thanks!

BlackSilvia96

[Bone]

Drivers door is available. Send me an offer and let me know if you want it complete or just teh shell.

[Bone]

Come on guys still alot of parts left! I am just looking for reasonable offers here not trying to rip anyone. What you guys dont need or want will go to ebay. You guys are getting first crack at it so get what you need now.

[95Blue240sx]

you have the guage cluster? base should be black faced. if you do how much shipped to 95148 san jose, ca.

[HockeyMatt04]

is the trunk lid in good condition? if so, how much shipped to 17033?

[Bone]

Trunk lid is in excellent condition however it has a wing. For a base model it has a lot of options on it. Such as Factory amp, sunroof, tweeters on A pillars, spoiler, and power antenae. About the only thing that is preventing it from being an SE is the 4 lug and gauge cluster. If you are interested in the trunk lid make me an offer. I am being quite reasonable on all parts I dont want to hose anyone as I may need parts later....

[Bone]

Come on guys its nearing the end of your chance for parts. I am leaving it off ebay till Friday then everything goes on Ebay. I have excepted almost all offers so far I am not being difficult at all I just want reasonable offers then everyone is happy I get rid of the stuff and you have the parts you need.

Tell ya what I will do some trading also on Turbo parts for a KA24de. I need some SR injectors, Boost gauge, intercooler, fuel pump, and some other odds and ends(such as Safc or somekind of fuel management). If you have something I need and I have something you need we should be good to go.

[Bone]

FYI Most of the interior is gone. I still have seats and few other odds and ends. Majority of the exterior is still here and no one has got anything from under the hood. Most of the suspension is still here also.

[Frappe]

Can you send pictures of the radiator support to Frappe @ lunaticus.net ? (remove the spaces) I'm not sure what a reasonable offer would be, $120 maybe?

Thanks.

[Bone]

Frappe I dont have a camera right now but I can guarantee you it has no dents, no rust and has never been hit. It still has both stickers on it and they are also in perfect condition. It will include the headlight braces that are attached. Where are you wanting it cut loose at though? There are several ways to cut it and options which would depend on price, for instants if you want me to remove all the spot welds and pull it off in a much like factory peice then it would be higher since it would take some time to drill the spot welds and pull it. If I can run the plasma cutter around the outside edge and pull it letting you remove the spot welds later it would be cheaper or if you want it cut across the middle of the rad hole keeping the top piece as a whole it would be cheaper still. Make since? Basically the less time I have to take to remove it the cheaper you get it. Not trying to be difficult here I am just not making much money on the parts since my main objective is to get rid of all of it and help everyone out. So I dont want to turn pulling it into a love affair bt I want to make sure you have the peice you need in the condition you need it...LOL Let me know

[Bone]

Allright guys last day for parts here. I am putting everything on ebay in the morning. Hit me up I still have a lot of parts left. I have not been hard to deal with ask anyone that has bought stuff I have pretty much taken all offers just to get rid of this stuff. Turbo parts can be substituted for cash

[Black240sx]

hey man, I'm waiting for an email letting me know when I will recive the turn signals...

[Bone]

Allright Sry It was supposed to have been automatically sent. I will pull it up and forward you the tracking number. I remember it is supposed to deliver Wednesday. Again Sry I will forward it ASAP

[Bone]

Allright I have one or two guys that have bought stuff that I have ran into delays on getting it shipped. Work has been a real pain and I havent been getting out of here until dark, I just wanted to let you all know that if you have not recieved a tracking number yet you will by Monday. Just wanted to keep everyone updated. There are 3 of you that paid me last week and have not received a number yet. Everything including the things that were bought this week will ship on Monday. Thx guys sry for the delays.

[240dreamer]

Still have the radiator/fan shroud and fan with clutch?

[JT410]

Interested in the seats or just the drivers seat how much shipped to 03038?

[allblackS14]

I know you mentioned that the passenger side fenders/doors/etc were FUBAR'D, but how is the front bumper? I didn't see anyone make a claim on it in previous posts nor did you mention anything about it. Front bumper shipped to 32226?

[Bone]

PM's sent. If there is something you want specifically please PM me and make an offer. But I will warn you there is a delay in shipping right now. I have people who paid immediatly whom I have not had the time to get their stuff to yet. SO I am taking care of all orders placed up to now before worrying about anything else getting sold. If you want something speak up and I will put your name on it and give you first dibs or you can pay me for it but be warned that it may take a week or so to get it shipped to you. Again I appoligize to everyone whom is waiting I have tried to contact everyone of you to inform you but I am unsure if all the messages went through after reading a PM earlier. It is coming I assure you and again I appoligize for the delay.

[Bone]

OK spent an all nighter last night and I am going to do it again tonight as of right now anything bought from here out will ship Monday if it is not pulled allready. I still have alot of parts that need a home. I think I am about back on schedule with shipping orders should be for sure tonight. Step up and get these parts guys. Here is what is left off teh top of my head. If there is something you need PM me and I may have it from another car.

AC condensor
AC hardlines
All motor parts
Drivers side fender
Drivers side suspension arms (Fr)
Front Bumper
Rear Bumper
Hood (pick up only) (primer black)
Spindles
sway bars
rear axles (have not inspected)
rear end (not VLSD)
Wiper motor
Wiper linkage
Coolant res.
Misc interior peices (seats, door panels, console, step plates, and kick plates, ETC)
Seat belts
Deck lid (with spoiler can shave teh spoiler and primer the deck for a fee)
rear suspension
all glass except Drivers door
Sunroof (fiberglass trim is busted off the back edge)
Sunroof motor
headliner
passenger window motor
Passenger door harness
Window amp
All kinds of Misc nuts and bolts
All kinds of Misc brackets and body plugs
2 sets of SE 16 inch wheels.

Again if ther is something you need not listed PM me I may still have it.

[Bone]

^^^^Still got all these parts^^^^

[homeade]

Very interested in the spindles. Please PM how much you want for em. Thanks, I can paypal today.

[Naro182]

Do you still have the sidemarkers available? I need the driver side one. Not the cover just like a couple inches of wires and the socket that holds the bulb. Well hell throw in the cover too. The whole thing how about 5 shipped?

[Two4zerO]

i sent you a PM i want those seat belts..forgot to ask about the color of the belts...

[ucfz31s13]

Hood latch shipped to 32825?

Thanks!

[Bone]

PM's sent

Come on all kinds of stuff left.

[ucfz31s13]

Did you send me a PM?

It shows I didn't get one.

[Bone]

Yep I sent you another one to so if you dont get it PM me your tely number and I'll call ya.

[thelinja]

You don't happen to have the grill do you?

[240mph]

interested in driver door how much shipped usps priority to 96931 thanks

[jaz]

Do you have the weather stripping holder for the driver's side door opening. It is the black u-channel strip screwed to the body above the door glass. How much with shipping to 48335. PM me. Thanks.

[Bone]

Pm's sent still alot left.

[s14zenki95]

how much for AC condensor and AC hardlines shipped to 91792...you still the the Radio Bezel?

[AGPSuperstar]

I'll take that passenger side window motor. PM me with a price shipped to 70810 (Baton Rouge, LA). Thanks man, Alex

[Bone]

PM's sent.

[JackSpade]

how much for the rad support?

[vicko]

Hows the drivers rear fender, and is that available for sale?

[Bone]

PM's sent keep offers coming ;)

[oO0OthinkO0Oo]

do you have the ashtray it doesn't matter what color it is because im in the process of painting my interior trim gunmetal i am also looking for front right and left plastic mud guard pieces? their on the bottom of the fenders directily above the wheel. i have pictures if you don't know what im talking about. if you have any of thoes parts let me know then ill make an offer

[Bone]

PM sent, Come on guys "Show me the money" ;) Lots of lots left

[mkiii90t]

I'm looking for the core support (top piece that radiator its on). Do you still have it? If so can i see pics?

[oO0OthinkO0Oo]

60 for the ash tray and fendermudguards? the ones im talking about are the front 2 that are on the front half directly above of the wheel. their fairly large pieces my winshield washer resivore and my air filter(injen extention) are both directly exposed, if you still don't know what im talking about ill just send pictures.
thanks

[oO0OthinkO0Oo]

where are you located, if you are located in southern cali i will pick it up

[Bone]

PM's sent on everything.

Im in TN bro ;)

[EvaPrototype]

How's the driver's side rear quarter? PM me a price if it's good and you're willing to cut/box/ship it.

[WanganKin]

Can i get one of the front turn signal bulb sockets. I dont really need the whole assembly just the socket that the bulb goes into with some of the wire still attached so i can splice it into mine. either side is fine. I will take both if u have them. So how much would you like for those?

Also do you have the passanger side rear turn signal (95~96 type)? If so how much for that?

Thanks,

Jonathan.

I will need it shipped to Los ANgeles California 90039.

[Bone]

Pm's sent Come on guys alot left! Ask anyone that has bought something I am more than fair on prices. Just trying to make a little money for my time. Everything I make goes back into our hobby so Support your hobby! Hehe (My turbo project) Hit me up on what you need ;)

[Bone]

I'll be cheap this weekend since I need some Money Make me some offers on this stuff guys.

[oO0OthinkO0Oo]

hey i bought the ashtray/ mudguards, i was wondering if i could get a tracking number for that and also if you have the driver side air cond. vent. the part that i need are the actual directors and the little plastic pieces that hold them into place. if you don't know what i mean just ask and ill show you pics.