PDA

View Full Version : NV S13 Gauge Cluster Adapters


k00laid83
03-23-2020, 09:13 AM
Hello Everyone,

I've been selling these harnesses on Facebook S-Chassis, 240sx Owners Club, and KA24DET/KA24DE groups. Just wanted to share this with Zilvia. I have 3 harnesses ready to ship.

My Version 2 - s13 gauge cluster harnesses are done. I?m selling these harnesses for $65 (that covers PayPal fees & shipping in the US). All harnesses have Raychem heat shrink, made with 18-gauge American made primary wiring, and an OEM connectors that mates to the OEM body harness. These harnesses were made to work with USDM vehicles. I do have a RHD front cut harness but unfortunately, I have no way to test as of right now.

Version 2 harnesses will now include indicator lights for door open, brake, oil, check engine, and alt/battery indicator wires, with an additional ground. These harnesses still include everything from Version 1. Every custom cluster harness is labeled for Fuel Signal, Fuel Signal Ground, Water Temp, Tach Signal, Left and Right Turn Signals, High Beam, 12v Constant Power, 12v Keyed Power, Illumination Power, Ground, VSS ECU Signal, VSS Positive, and VSS Negative.

The idea for these harnesses is to have people avoid cutting up their original harness when running aftermarket gauges as their new gauge cluster. It should make things easier for people to tackle their own wiring, just like a car stereo adapter. One thing to remember is our cars are getting older and parts are harder to find intact. I think it?s cool to be able to plug your OEM cluster back in if you want without any issues.

If you're interested in one of these harnesses, please don?t hesitate in contacting me. You can send your $65 payment or I can send a PayPal invoice.

PayPal: [email protected]

Thank you,
Raul

https://i.imgur.com/MewGy3w.png
https://i.imgur.com/bHA6GwO.png
https://i.imgur.com/Q2203Sj.png
https://i.imgur.com/28JMmQH.png
https://i.imgur.com/Gtt0Q8H.png

afishysilvia
03-23-2020, 10:08 AM
Bump for quality work, and quality parts. Raul is an absolute pleasure to deal with, still very customer service oriented which says a lot in today’s world.

k00laid83
03-23-2020, 10:21 AM
Bump got quality work, and quality parts. Raul is an absolute pleasure to deal with, still very customer service oriented which says a lot in today?s world.

Thank you for saying that buddy!

niSm095
03-23-2020, 07:32 PM
You know what. This is a really cool idea. Props for bringing it to the market. I have an aftermarket setup now I wouldn't mind cleaning up some. This would be great for it!

k00laid83
03-23-2020, 10:05 PM
You know what. This is a really cool idea. Props for bringing it to the market. I have an aftermarket setup now I wouldn't mind cleaning up some. This would be great for it!

Thank you sir. When I started making these I ended up redoing mine. So I totally get it. Let me know if you decide to clean up your wiring with one of these.

TheRealSy90
03-24-2020, 02:01 PM
Think you could make one for converting to the Kouki 180sx cluster?

k00laid83
03-24-2020, 02:43 PM
Think you could make one for converting to the Kouki 180sx cluster?

The plan is to make conversion harnesses. Unfortunately, sourcing all the connectors gets tough because Nissan used multiple companies. Essentially, I've continued to research and once I've found everything I need I'll start producing the harnesses for the 180sx. I even have a spare cluster to test on.

e30gangsta
03-24-2020, 04:58 PM
What about harnesses for hud clusters?

k00laid83
03-24-2020, 05:52 PM
What about harnesses for hud clusters?

180sx type-x, nx1600, HUD, and s2k conversion harnesses are on the table. Like in my previous response the issue is sourcing the correct connectors. I have plans on making these in the future.

I did have a customer use my version 1 harnesses to help him wire up his nx1600 cluster. These harnesses can help wire in any kind of cluster, even the s2k cluster.

https://i.imgur.com/IY4TyPn.png

https://i.imgur.com/RZd039R.png

https://i.imgur.com/11Q15N8.png

tootall4la
03-26-2020, 02:07 AM
180sx type-x, nx1600, HUD, and s2k conversion harnesses are on the table. Like in my previous response the issue is sourcing the correct connectors. I have plans on making these in the future.

I did have a customer use my version 1 harnesses to help him wire up his nx1600 cluster. These harnesses can help wire in any kind of cluster, even the s2k cluster.

https://i.imgur.com/IY4TyPn.png

https://i.imgur.com/RZd039R.png

https://i.imgur.com/11Q15N8.png


I need an s2k harness for my s14 make me one!!!!!!


Sent from my iPhone using Tapatalk

k00laid83
03-26-2020, 09:44 AM
I need an s2k harness for my s14 make me one!!!!!!


Sent from my iPhone using Tapatalk

Right now I only have the s13. I picked up an s14 cluster and hopefully soon I can show the s14 some love.

Xaser
03-26-2020, 11:59 AM
https://prnt.sc/rnci1g ( i cant hotlink)

That's my car a few years ago, dont be like me, now use the Raul Adapters, 15 min vs 4 days weldering catching a tottaly mess.

k00laid83
03-26-2020, 06:03 PM
https://prnt.sc/rnci1g ( i cant hotlink)

That's my car a few years ago, dont be like me, now use the Raul Adapters, 15 min vs 4 days weldering catching a tottaly mess.

Thanks bro.

xFix Kaos
03-26-2020, 06:51 PM
I'm interested, currently making a body harness for my car...but if I can get a plug and play cluster harness....I have a manual speed but I need it to work with my heads up display on the windshield....

Sent from my SM-G960U using Tapatalk

VenomKillz
03-26-2020, 08:05 PM
Are these supposed to work with JDM clusters on a USDM car?

brndck
03-27-2020, 01:50 PM
Think you could make one for converting to the Kouki 180sx cluster?

The plan is to make conversion harnesses. Unfortunately, sourcing all the connectors gets tough because Nissan used multiple companies. Essentially, I've continued to research and once I've found everything I need I'll start producing the harnesses for the 180sx. I even have a spare cluster to test on.


Are these supposed to work with JDM clusters on a USDM car?

UHHHHHHH. :rolleyes:

k00laid83
03-27-2020, 02:43 PM
I'm interested, currently making a body harness for my car...but if I can get a plug and play cluster harness....I have a manual speed but I need it to work with my heads up display on the windshield....

Sent from my SM-G960U using Tapatalk

Essentially, this exactly like using a stereo adapter with labeled wires. You can use this to wire what ever cluster you would like. These are not plug in play on the cluster side. It's only plug n play with the body harness. Once, I get to that point I'll make sure to advise the community.

k00laid83
03-27-2020, 02:44 PM
Are these supposed to work with JDM clusters on a USDM car?

You can use these harnesses to wire in a JDM cluster. You would have every wire labeled to assist you.

k00laid83
03-30-2020, 01:06 PM
I have plenty of harnesses to go around. I have 3 ready to ship, and can make harnesses anytime.

TheRealSy90
03-30-2020, 01:52 PM
UHHHHHHH. :rolleyes:

Well there's a big difference between zenki/chuki jdm clusters, which are plug and play to usdm cars. And the kouki 180sx cluster that I was asking about, which is not.

k00laid83
03-30-2020, 02:59 PM
Well there's a big difference between zenki/chuki jdm clusters, which are plug and play to usdm cars. And the kouki 180sx cluster that I was asking about, which is not.

There are differences between the zenki/chuki jdm clusters. But if someone has the plugs that go into the back of the actual gauge cluster, regardless the cluster type. These harnesses will help with the wiring their cluster, regardless if its a jdm, nx1600, type-x, s2k, or aftermarket gauges as your cluster. If you take a look at the first picture you'll see that these harnesses have labeled wires and do not have connector ends on the cluster side. The connectors that plug into the body harness will plug into a usdm car. I hope that helps, currently I am not making conversion harnesses for any type of cluster. Eventually, I hope I can start offering plug and play conversion harnesses. Thanks TheRealSy90 for helping with clearing things up brother.

Mike - E
03-30-2020, 05:47 PM
this is true quality work, I wonder if there's a way to run a nx1600 cluster with the heads up display projector for speedometer.

k00laid83
03-30-2020, 05:58 PM
this is true quality work, I wonder if there's a way to run a nx1600 cluster with the heads up display projector for speedometer.

Thank you! These harnesses should help with the wiring for that. I know that some people use a Speedo Healer with a GPS module for the s2k cluster in the Honda Community. I suggested to my customer that I wonder if it was possible to use that combination with an nx1600 cluster. I'm sure once that gets figured out I'm sure that the heads up display would work as well. I've been keeping an eye out for an nx1600 cluster to test on.

Mike - E
03-30-2020, 06:10 PM
Thank you! These harnesses should help with the wiring for that. I know that some people use a Speedo Healer with a GPS module for the s2k cluster in the Honda Community. I suggested to my customer that I wonder if it was possible to use that combination with an nx1600 cluster. I'm sure once that gets figured out I'm sure that the heads up display would work as well. I've been keeping an eye out for an nx1600 cluster to test on.

beautiful, please keep me posted, always wanted to run the NX1600 but don't want to give up my HUD projector as I have the digital HUD cluster.

TheRealSy90
03-30-2020, 07:49 PM
I just realized how cheap your price is on these! Definitely worth more imo.

k00laid83
03-31-2020, 08:50 AM
I just realized how cheap your price is on these! Definitely worth more imo.

Yea I know that, I'm just trying to give the best price for products. I'm sure that prices will fluctuate based on how much I pay for supplies. I do appreciate you saying noticing that!

k00laid83
04-03-2020, 08:51 AM
Friday BUMP!

k00laid83
04-04-2020, 11:18 AM
I just realized how cheap your price is on these! Definitely worth more imo.

Just like when I have started selling my power steering fittings the prices kept fluctuating. Essentially, with these harnesses the original price has fluctuated to cover material costs, Paypal fees and shipping. New price is $65 free shipping in the USA. I'm trying to be transparent with everyone and provide quality parts at great prices!

CamryOnBronze
04-07-2020, 07:07 AM
This is awesome! Thanks for bringing another great solution to market.

k00laid83
04-07-2020, 08:46 AM
This is awesome! Thanks for bringing another great solution to market.

Thank you sir!

bmhossain
04-07-2020, 09:04 AM
Love this man. I'll be ordering one in the future. Looking forward to seeing what else you cook up.

k00laid83
04-07-2020, 05:50 PM
Love this man. I'll be ordering one in the future. Looking forward to seeing what else you cook up.

Thanks brother! I have a few more things in the works.

DreamN
04-07-2020, 07:02 PM
These look like proper quality pieces! Never made any that looked this legit.

What info do you need to finalize 180sx kouki cluster harnesses? Might be able to help.

k00laid83
04-07-2020, 09:30 PM
These look like proper quality pieces! Never made any that looked this legit.

What info do you need to finalize 180sx kouki cluster harnesses? Might be able to help.

I need to obtain the connectors that go to the back of the actual 180sx kouki cluster. I also need to find out what manufacturer was used for those connectors. Seems like Nissan used many different types of manufacturers for most of these connectors. I also need to find the manufacturers were used for the s14 clusters. I've researched like crazy, I'm sure I'll end up finding them.

DreamN
04-08-2020, 12:01 AM
If it helps any 4th gen maximas use the same cluster connectors as the 180sx type x. 2 out of the 3 connectors on the maxima were identical.

k00laid83
04-08-2020, 09:06 AM
If it helps any 4th gen maximas use the same cluster connectors as the 180sx type x. 2 out of the 3 connectors on the maxima were identical.

Yea I knew that the maxima has the same connectors, just haven't gone to the junkyard with everything that's going on. I have to go to my local pick n pull and get those connectors soon. Once, I do that I'll have to find out which manufacturer produced those connectors.

By the way I still have one harness left that can be shipped out right away. I'll start making 10 more this weekend. If anyone is interested please don't hesitate in reaching out.

k00laid83
04-13-2020, 11:03 AM
Monday BUMP! 10 more harnesses coming this week.

k00laid83
04-15-2020, 10:45 PM
I have one harness ready to ship. Don't hesitate in letting me know if you're interested.

k00laid83
06-25-2020, 12:00 PM
Hi everyone,

My website is up and running. If anyone is interested in one of these harnesses go check out my website. Thanks.

Website: https://www.tightfitfab.com

k00laid83
07-27-2020, 12:49 PM
Hope everyone is doing well. Just wanted to let everyone know that I have harnesses ready to ship out if anyone is interested. Check the website out.

S14rebuild
07-27-2020, 12:59 PM
Dam, this is sweet, wish there was option for s14(unless i miessed it sumwhere) i had to make a custom one but this looks like and awsome plug and play one.

k00laid83
07-27-2020, 01:19 PM
Dam, this is sweet, wish there was option for s14(unless i miessed it sumwhere) i had to make a custom one but this looks like and awsome plug and play one.

Yea man I'm still researching and I'll let everyone on here know. I'll definitely need someone for testing. Of course, once I'm there I'll hook them up with a fresh harness. Again, I'll make sure the community is aware once I get to that point.

TheRealSy90
07-27-2020, 06:54 PM
You think you could make the opposite of this, basically so I could wire in the stock gauge cluster without having the factory chassis harness lol. Just wire whatever inputs I want to use off of the custom chassis harness and standalone ems.

k00laid83
10-18-2020, 02:44 PM
Just letting everyone know I have plenty of S-chassis power steering fittings and a few s13 custom gauge cluster harnesses ready to ship. Don't hesitate in placing your order at https://tightfitfab.com/ or message me directly. You can also reach me on instagram or facebook @tightfitfab

https://i.imgur.com/3cxaKaHl.jpg

k00laid83
11-29-2020, 10:39 PM
I hope everyone had a great Thanksgiving. Just want to remind everyone that I have plenty gauge cluster harnesses as well as power steering fittings. You can pick up a set on my website. Link is listed below!

sLiDewAys
12-15-2020, 04:41 PM
This thread is pretty old.

Curious, do you offer the s13 Digital Cluster Sub-harness?

k00laid83
12-15-2020, 10:03 PM
This thread is pretty old.

Curious, do you offer the s13 Digital Cluster Sub-harness?

I currently do not, I only have the harnesses that I've posted about.

s13silvia123
12-17-2020, 03:54 PM
https://i.imgur.com/RZd039R.png

I would like to see this in a larger picture kind of hard to see.

k00laid83
12-17-2020, 04:29 PM
https://i.imgur.com/RZd039R.png

I would like to see this in a larger picture kind of hard to see.

Here you go, hope this helps. :wiggle:

https://i.imgur.com/eUlSW5qh.jpg

cole d
12-30-2020, 11:26 PM
Hey I have an s2000 cluster with the connectors care to build me a custom harness?

hksztss
12-31-2020, 08:34 AM
I?d like to purchase one, pm?d!

k00laid83
01-02-2021, 11:15 AM
Hey I have an s2000 cluster with the connectors care to build me a custom harness?

I'm sorry I currently don't offer to build harnesses for people. The current universal harness helps someone with wiring in the cluster you would like to use. Every wire is labeled and should make things easier like if you were wiring in a car stereo.

k00laid83
01-02-2021, 11:17 AM
I?d like to purchase one, pm?d!

I pm'd you back. You can also reach me on my facebook business page or instagram @tightfitfab. Another option is my email at [email protected]

You can also place your order on my website https://tightfitfab.com/

Please don't hesitate in reaching out.