super.trick
01-15-2020, 08:05 PM
Hi guys, I’ve got a Brembo rear setup which will bolt on to S13/14/15, R32/33/34 and Z32.
The calipers are from a BCNR33. These are the same as V-Spec BNR32 calipers and Series 1 BNR34 calipers (except those are gold). These are fairly uncommon, with the rears not often available separately from the fronts.
Condition is good. The clear coat on the calipers has started to flake, taking most the printed Brembo logos with it. Unknown pads, but they've got plenty of life left.
I have not driven on these personally but they were purchased as working. As with anything used and of this age, I’d recommend installing fresh seals for peace of mind.
The rotors are Dixcel PD series, 300mm. BNIB. I imported these from Japan, which ended up being quite a costly endeavor. Shipping will be exponentially cheaper now that they are stateside.
These are a quality rotors more reasonably priced than OEM.
What makes this setup so great is that it will all bolt on perfectly without any adaptors. The whole setup looks completely OEM because, it is.
Asking: now $775 shipped OBO
https://uploads.tapatalk-cdn.com/20200116/b220418aae5ef03feb34d8eca276f95f.jpg
I can provide better pictures on request.
Additionally, I have a complete Z32 E-brake setup and two sets of Z32 rear knuckles if someone is looking to completely overhaul their rear setup.
One set of knuckles is stock, the other has new Megan bushings and SPL spherical shock mounts pressed in.
Thanks for looking
The calipers are from a BCNR33. These are the same as V-Spec BNR32 calipers and Series 1 BNR34 calipers (except those are gold). These are fairly uncommon, with the rears not often available separately from the fronts.
Condition is good. The clear coat on the calipers has started to flake, taking most the printed Brembo logos with it. Unknown pads, but they've got plenty of life left.
I have not driven on these personally but they were purchased as working. As with anything used and of this age, I’d recommend installing fresh seals for peace of mind.
The rotors are Dixcel PD series, 300mm. BNIB. I imported these from Japan, which ended up being quite a costly endeavor. Shipping will be exponentially cheaper now that they are stateside.
These are a quality rotors more reasonably priced than OEM.
What makes this setup so great is that it will all bolt on perfectly without any adaptors. The whole setup looks completely OEM because, it is.
Asking: now $775 shipped OBO
https://uploads.tapatalk-cdn.com/20200116/b220418aae5ef03feb34d8eca276f95f.jpg
I can provide better pictures on request.
Additionally, I have a complete Z32 E-brake setup and two sets of Z32 rear knuckles if someone is looking to completely overhaul their rear setup.
One set of knuckles is stock, the other has new Megan bushings and SPL spherical shock mounts pressed in.
Thanks for looking