PDA

View Full Version : For Sale! Underground Motorsports Demo RB26DETT Powered Carbon Fiber 1998 240SX


umsports
11-17-2004, 07:06 PM
Zilvia,

You've heard it right... As promised we are selling our 2004 HCI Mag. Project Car/ Demo Car to make way for our 2005 project car...

This car will be featured in the 01/05 issue of HCI magazine, due in bookstores next week! Go get your copy and show your support!

So, somebody is going to get a magazine car for christmas!

Bidding will begin Monday, November 22 on Ebay...

I have thoroughly enjoyed working with our 18 corporate sponsors on this latest creation...

Most importantly, I wanna thank McKinney Motorsports for doing all the fabrication, motor swap, etc on the car... Without you guys, the industry wouldn't be what it is.. You are truly a one of a kind.

Also BF Goodrich for their support. Getting to have our car in your booth over 2004 has been a great experience, and I look forward to dealing with you in the future!

I want to thank all those that have followed the car and posted their support. Thanks Zilvia!

Here are the specs on the car:

Weight: 2925 lb. (w/o driver)
Top Speed: 200 MPH (Est.)
Rev Limit: 8000 RPM
S15 Front End Conversion
Motor: R33 RB26DETT w/ RB25DET Tranny
Cams: stock
Pistons: stock
Turbo Chargers: stock
Temp Reg: Nismo Racing Thermostat
Intake: Apexi Super Flow Intake Pods x2
LSD: Cusco RS 1.5 way LSD
Rods: stock
Downpipe: McKinney Motorsports Downpipe
Mount Kit: McKinney Motor and Tranny Mounts, McKinney One-Piece Driveshaft
Strut Bar: Cusco 40D 40mm Aluminum RaceStrut Bar
Gauges: Autometer Cobalt Series (Boost, Water Temp, Oil Psi, EGT, Trans Temp, Air/Fuel, 5" Tach)
Exhaust: Apexi Ex Mag 3.75" Exhaust
Cooling fans: Permacool (2) 12" High Perf. Electric Pull Fans, 3000 CFM
Intercooler: HybridPower.com 24x12x3 core size
BOV: Apexi Racing Max Power BOV
Fuel system: Apexi Fuel pressure Regulator, Walbro 255/lph Fuel Pump, Internal
Computer: stock
Boost Control: Apexi AVC-R
Clutch: Exedy Twin-Plate NM032SD Racing Clutch
Suspension: Apexi N1 V-Spec Drag Coilovers, Battle Version Rear Upper Control Arms, Rear Toe Links, Rear Traction Links, Front Tension Rods
Brakes: Underground 300ZX Calipers/ Supra TT Rotors Brake Upgrade (Front)
Stillen Supra TT Rotors (Front), Stillen 300ZX TT Rotors (Rear)
Stillen 300ZX Racing Brake Pads (Front and Rear)
PDM Racing Conversion Brake Lines (Front and Rear)
Wheels: Motegi Prototypes 18x9 (3" lip) , 18x10 (3.5"lip) Gunmetal w/polished lip
Tires: BF Goodrich (Front) 225-40-18 KD, (Rear)285-30-18 K/D
Paint: House of Kolor PBC-36 TruBlue Pearl, Painted by Shameless Designs Searcy, Ar
Aero Kit: Cwings/ GTP Carbon Fiber Body

Thanks again!

Kind Regards,

Chris Riggs
Underground Motorsports

http://www.undergroundmotorsports.com/Images/NOPI%20001.jpg

ThatGuy
11-17-2004, 07:18 PM
Moved to the proper forum. :madfawk:

umsports
11-17-2004, 07:26 PM
Thanks! Appreciated

anotherblusi
11-18-2004, 10:08 PM
ummm 200mph top speed on a relatively stock RB26?!? I don't think so, not even a good estimate.

orion::S14
11-19-2004, 08:48 AM
^^^ It's close...

24.8" diameter tires, 4.083:1 rear end, .759:1 5th gear, 8000rpm = ~191mph mechanically limited top speed.

Now, does it have the power??? Probably needs about ~380-400rwhp to move a ~3000lb car that fast...it's probably in the ballpark.

[/threadjack]

tah
11-19-2004, 01:47 PM
ummm 200mph top speed on a relatively stock RB26?!? I don't think so, not even a good estimate.

ummmm who gives a shit when it could burn any car you own. SON.

s156spd
11-20-2004, 12:23 AM
Zilvia,

You've heard it right... As promised we are selling our 2004 HCI Mag. Project Car/ Demo Car to make way for our 2005 project car...

This car will be featured in the 01/05 issue of HCI magazine, due in bookstores next week! Go get your copy and show your support!

So, somebody is going to get a magazine car for christmas!

Bidding will begin Monday, November 22 on Ebay...

I have thoroughly enjoyed working with our 18 corporate sponsors on this latest creation...

Most importantly, I wanna thank McKinney Motorsports for doing all the fabrication, motor swap, etc on the car... Without you guys, the industry wouldn't be what it is.. You are truly a one of a kind.

Also BF Goodrich for their support. Getting to have our car in your booth over 2004 has been a great experience, and I look forward to dealing with you in the future!

I want to thank all those that have followed the car and posted their support. Thanks Zilvia!

Here are the specs on the car:

Weight: 2925 lb. (w/o driver)
Top Speed: 200 MPH (Est.)
Rev Limit: 8000 RPM
S15 Front End Conversion
Motor: R33 RB26DETT w/ RB25DET Tranny
Cams: 270 IN/ 270 EX, low lift
Pistons: stock
Turbo Chargers: stock
Temp Reg: Nismo Racing Thermostat
Intake: Apexi Super Flow Intake Pods x2
LSD: Cusco RS 1.5 way LSD
Rods: stock
Downpipe: McKinney Motorsports Downpipe
Mount Kit: McKinney Motor and Tranny Mounts, McKinney One-Piece Driveshaft
Strut Bar: Cusco 40D 40mm Aluminum RaceStrut Bar
Gauges: Autometer Cobalt Series (Boost, Water Temp, Oil Psi, EGT, Trans Temp, Air/Fuel, 5" Tach)
Exhaust: Apexi Ex Mag 3.75" Exhaust
Cooling fans: Permacool (2) 12" High Perf. Electric Pull Fans, 3000 CFM
Intercooler: HybridPower.com 24x12x3 core size
BOV: Apexi Racing Max Power BOV
Fuel system: Apexi Fuel pressure Regulator, Walbro 255/lph Fuel Pump, Internal
Computer: stock
Boost Control: Apexi AVC-R
Clutch: Exedy Twin-Plate NM032SD Racing Clutch
Suspension: Apexi N1 V-Spec Drag Coilovers, Battle Version Rear Upper Control Arms, Rear Toe Links, Rear Traction Links, Front Tension Rods
Brakes: Underground 300ZX Calipers/ Supra TT Rotors Brake Upgrade (Front)
Stillen Supra TT Rotors (Front), Stillen 300ZX TT Rotors (Rear)
Stillen 300ZX Racing Brake Pads (Front and Rear)
PDM Racing Conversion Brake Lines (Front and Rear)
Wheels: Motegi Prototypes 18x9 (3" lip) , 18x10 (3.5"lip) Gunmetal w/polished lip
Tires: BF Goodrich (Front) 225-40-18 KD, (Rear)285-30-18 K/D
Paint: House of Kolor PBC-36 TruBlue Pearl, Painted by Shameless Designs Searcy, Ar
Aero Kit: Cwings/ GTP Carbon Fiber Body

Thanks again!

Kind Regards,

Chris Riggs
Underground Motorsports

http://www.undergroundmotorsports.com/Images/NOPI%20001.jpg


can u list more pictures of the car? and u dindt list a price.. or are u just goning to sell it threw ebay?

umsports
11-20-2004, 12:30 AM
Check out the website, for more pics and vids...

www.undergroundmotorsports.com

I'm starting bidding at 25K..

Take care!

Chris

psychedelicbeats
11-20-2004, 03:17 AM
ummmm who gives a shit when it could burn any car you own. SON.
http://epsilon.applepics.com/50/userfiles/419edb94c833f.gif
0wned

anotherblusi
11-21-2004, 06:17 PM
not trying to start shit here, 200mph just sounded way to unrealistic... Considering my cuz's R33 can't come close to 200. And by the way I own an 240 with an RB25... so don't go runnin your mouth when you can't back it up, SON! :mrmeph:

tah
11-21-2004, 07:44 PM
Oh I'm sorry I didn't know your car could run less than a 10.8 in the 1000 ft. (which is like mid 12's?)... aright i guess it's not THAT fast, but still. SON.

Annoying Eric
12-03-2004, 11:10 AM
You people are getting off topic and ruining the post.. Tah your an idiot. Seriously your some punk bitch from Long Island.. Your jsut jumping on the bandwagon and if you wanna proove me wrong me up with me so we can see how badass YOUR car is...

Now, I dunno if this car is capable of 200 mph. BUT WHY WOULD IT MATTER. where are you gonna be doing 200 mph on the street. Where are you gonna be doing 190 on the street. In that matter what track are you gonna be doing 200 mph.. espially in that car. I mean you hit a guardrail and thats the end of you.

tah
12-03-2004, 05:24 PM
Few things wrong with your post:

1. Car is sold, no reason to post anything in this thread.
2. I didn't say anything about my own car, just defending someone elses.
3. I'm not some punk bitch bandwagon newbie. You can ask Autri aka SmellsLikeCurry if you want, I've been into 240's as long as he has. :bigok:

meteorite_flo
01-18-2006, 02:13 PM
y'all need help. drop the drama on zilvia.

Need2Boost
01-18-2006, 03:18 PM
you need some help, you brought up a year old post!

kingsol
01-18-2006, 03:19 PM
whoa... two years old buddy.

Need2Boost
01-18-2006, 03:24 PM
Its only 1 year and a couple of months...And he just brought it up to say that. I smell lockage :)

tah
01-18-2006, 08:45 PM
I was the last one to post hahaha, what a dumb fuck.

slideways2004
01-22-2006, 11:53 AM
IBTL! in before the lock

INBB! In before the banage

smellslikecurry
01-22-2006, 12:25 PM
lol wow...some people need to learn how to use the interweb