Sr20 haltech timing question

[Sr20-Vert]

I have a question if anyone knows. Do I need to unplug tps to set timing if you have haltech as standalone? The reason I ask is because it’s hardwired into harness

[jr_ss]

Setting timing is completely different from the factory ECU. The reason you have to unplug said TPS sensor is to put it into diagnostic mode.

[e30gangsta]

No, there should be a locked timing mode/setting on the ecu.

[Sr20-Vert]

No, there should be a locked timing mode/setting on the ecu.

There is here’s my question my idle is about 1100 does it have to be 800 to test timing I have the timing gun also my tps is hardwired in

[e30gangsta]

There is here’s my question my idle is about 1100 does it have to be 800 to test timing I have the timing gun also my tps is hardwired in

No it does not matter.