super.trick
07-29-2019, 08:02 PM
I have a bunch a parts here. Some of these are left over from a previous build, others I've replaced... Either way, everything here is just taking up space and needs to find a new home.
Offer up, would love to get this stuff gone ASAP so I can buy more car parts and not feel so bad about it.
I'll add the missing pictures soon, but I've been putting off posting this thread long enough.
If there is a picture, I have more available for those interested.
S13:
-Street Faction 3-Point Strut Brace + BMC Brace . $155
This didn't fit my last 240 quite right. It may have been because of the high mileage chassis or because I never bolted up the third point... not sure. Priced super low regardless.
-Progress Front Sway Bar $220
Very good shape. $150 Hotchkis billet mounts included. These fit better than the universal mounts included with the bar and are stronger.
Nagisa Shakitto Plates $295
Brand new.
OEM Steering Rack/Subframe $185
Decent shape. Can't verify condition of the rack but doesn't look like it was leaking.
-Street Faction Tension Rod Brackets/Power Brace. $220
Very good shape, clearancing done for sway bar collars (was done cleanly).
https://i.imgur.com/CL3Goo5l.jpg
-Pignose Bumper $40
Good shape, good paint. Plastic 'OEM replacement'... not factory and not fiberglass... fits decently well. Side brackets and lights included. (Old pic, bumper is off.)
https://i.imgur.com/USiBbx7l.jpg
JDM Plate Mount $40
Brand new. Can't remember if this is R32 or S13 specific but it should fit regardless.
https://i.imgur.com/8m2kiGol.jpg
RB26:
-R33 CAS $90
Good shape, although could use cosmetic attention.
-Intake Manifold $75
Has ports drilled for MAP sensors
-R33 Oil/Water Heat Exchanger $50
Good shape. Removed in favor of Air/Air cooler.
-Upper Water Neck $20
Has sensor bung welded in
https://i.imgur.com/U4Ts2zIl.jpg
-BCNR33 N1 Turbos (Steel wheels, larger turbine A/R, 360deg bearings) $425
Just the cartridges and housings, no fittings. Appear to be in decent shape, not too much shaft play on either, one has almost none. Can't verify if they are operable since I never ran the engine with them. I'd suggest a rebuild and the price reflects this.
https://i.imgur.com/AKGWvRql.jpg
HKS Reinforced Wastegate Actuators $65
Appear to be in fair/usable condition.
https://i.imgur.com/4Di1zRQl.jpg
-Tomei? R32/R33 Cams $300
Aftermarket cams in good shape. Markings suggest Tomei. (A2591N, A2591X) Can't be sure of specs but I'm thinking these are older 254deg Poncams, P/N TA301A-NS05A. I am 98% sure they are 9.15mm lift, however. Price reflects uncertainty.
https://i.imgur.com/3T3x6Kvl.jpg
-Greddy Cams Gears $190
Great used condition. No issues besides color fade and (likely cleanable) grime.
https://i.imgur.com/xXlrUZJl.jpg
-RB26 Throttle Bodies $125/set
Have two sets. Both ready to use, no 'light leaks' visible which would screw with idle. I need the hardware (nuts and washers) from the linkages but the arms are included. (Dirtier/worse set shown)https://i.imgur.com/1ezpiqVl.jpg
-Water/Vacuum Lines that run behind the engine and above the turbos. $180
Mostly complete, not often for sale. Good condition.
https://i.imgur.com/MsECsrhl.jpg
Thanks for looking!
Offer up, would love to get this stuff gone ASAP so I can buy more car parts and not feel so bad about it.
I'll add the missing pictures soon, but I've been putting off posting this thread long enough.
If there is a picture, I have more available for those interested.
S13:
-Street Faction 3-Point Strut Brace + BMC Brace . $155
This didn't fit my last 240 quite right. It may have been because of the high mileage chassis or because I never bolted up the third point... not sure. Priced super low regardless.
-Progress Front Sway Bar $220
Very good shape. $150 Hotchkis billet mounts included. These fit better than the universal mounts included with the bar and are stronger.
Nagisa Shakitto Plates $295
Brand new.
OEM Steering Rack/Subframe $185
Decent shape. Can't verify condition of the rack but doesn't look like it was leaking.
-Street Faction Tension Rod Brackets/Power Brace. $220
Very good shape, clearancing done for sway bar collars (was done cleanly).
https://i.imgur.com/CL3Goo5l.jpg
-Pignose Bumper $40
Good shape, good paint. Plastic 'OEM replacement'... not factory and not fiberglass... fits decently well. Side brackets and lights included. (Old pic, bumper is off.)
https://i.imgur.com/USiBbx7l.jpg
JDM Plate Mount $40
Brand new. Can't remember if this is R32 or S13 specific but it should fit regardless.
https://i.imgur.com/8m2kiGol.jpg
RB26:
-R33 CAS $90
Good shape, although could use cosmetic attention.
-Intake Manifold $75
Has ports drilled for MAP sensors
-R33 Oil/Water Heat Exchanger $50
Good shape. Removed in favor of Air/Air cooler.
-Upper Water Neck $20
Has sensor bung welded in
https://i.imgur.com/U4Ts2zIl.jpg
-BCNR33 N1 Turbos (Steel wheels, larger turbine A/R, 360deg bearings) $425
Just the cartridges and housings, no fittings. Appear to be in decent shape, not too much shaft play on either, one has almost none. Can't verify if they are operable since I never ran the engine with them. I'd suggest a rebuild and the price reflects this.
https://i.imgur.com/AKGWvRql.jpg
HKS Reinforced Wastegate Actuators $65
Appear to be in fair/usable condition.
https://i.imgur.com/4Di1zRQl.jpg
-Tomei? R32/R33 Cams $300
Aftermarket cams in good shape. Markings suggest Tomei. (A2591N, A2591X) Can't be sure of specs but I'm thinking these are older 254deg Poncams, P/N TA301A-NS05A. I am 98% sure they are 9.15mm lift, however. Price reflects uncertainty.
https://i.imgur.com/3T3x6Kvl.jpg
-Greddy Cams Gears $190
Great used condition. No issues besides color fade and (likely cleanable) grime.
https://i.imgur.com/xXlrUZJl.jpg
-RB26 Throttle Bodies $125/set
Have two sets. Both ready to use, no 'light leaks' visible which would screw with idle. I need the hardware (nuts and washers) from the linkages but the arms are included. (Dirtier/worse set shown)https://i.imgur.com/1ezpiqVl.jpg
-Water/Vacuum Lines that run behind the engine and above the turbos. $180
Mostly complete, not often for sale. Good condition.
https://i.imgur.com/MsECsrhl.jpg
Thanks for looking!