Rod knock metronome
07-07-2019, 12:24 AM
1991 RB25 Infiniti M30
Price: $1500 OBO
Located in Tehachapi, CA
Contact: 661-529-8526
Looking to sell or trade my RB25 Infiniti M30 project. Car currently doesn’t run, and needs parts and love to be complete.
Pros:
-Clean title
-All DMV Fees paid Just needs “smog” to complete a transfer
-Complete R31 skyline front subframe
-R31 skyline shift bezel & boot (looks factory)w/Nismo shift knob
-Custom machined aluminum trans mount (Only 1 made)
-Professionally modified and balanced driveshaft from TheDriveShaftShop in San Pedro
-Dakota digital gauge cluster (factory face for m30, but works with rb25det engine as if factory)
-Custom top plates on top of BC S13 coilovers made to fit the m30
-5 speed conversion using S13 master and pedal, with Circuit Sports conversion line (No m30 came 5speed stateside)
-Custom wire harness RB25DET to m30 chassis
-Custom Power steering hose RB25det to M30 rack
-Modified s13 spindles and lower control arms (all the angles)
-Voodoo S13 front tension rods
-Welded rear differential
-Some Original Intercooler piping, w/HKS SSQV BOV & Apexi air filter
-Comes with 2 RB25DET ECU’s
-Front tires are brand new
-Aftermarket Steering wheel
-Walbro 255lph fuel pump
-Large front mount intercooler still in car
Cons:
-The car was parked by the previous owner after the engine was running rough, and subsequently, the transmission was used on another drift project he had. I have the original engine, which was disassembled and inspected found #6 piston ringland had failed causing the misfire. Engine is included with sale
-Bumpers on the car are paint chipped and cracked/broken. They have been painted but need to be replaced. looks good from far, but far from good.
-Hood and mounting bracket is damaged from hood flying up while drifting (didn’t damage car or roof at all somehow. Could find one at a junk yard or with the M30 community)
-Seats have covers on them because the leather is basically destroyed underneath.
Summary:
-If you wanted to drive this car you would need an RB transmission, the rb25 put back together or a JDM one, and a cooling/radiator system.
-My hope is someone will get this car and restore it to how it was in 2009 when it was featured in Project car magazine and featured in a speedhunters article.
The first few pictures are of the car when it was featured years ago, the last few are of the car now.
Thanks for looking
https://i.imgur.com/0FnHazg.jpg
https://i.imgur.com/eIWLCbj.jpg
https://i.imgur.com/bQqzass.jpg
https://i.imgur.com/SBsFbxg.jpg
https://i.imgur.com/NDHJgux.jpg
https://i.imgur.com/vVNDuTm.jpg
https://i.imgur.com/llceaKh.jpg
https://i.imgur.com/2iyM2HU.jpg
https://i.imgur.com/13mliHY.jpg
https://i.imgur.com/d1a1pg8.jpg
Price: $1500 OBO
Located in Tehachapi, CA
Contact: 661-529-8526
Looking to sell or trade my RB25 Infiniti M30 project. Car currently doesn’t run, and needs parts and love to be complete.
Pros:
-Clean title
-All DMV Fees paid Just needs “smog” to complete a transfer
-Complete R31 skyline front subframe
-R31 skyline shift bezel & boot (looks factory)w/Nismo shift knob
-Custom machined aluminum trans mount (Only 1 made)
-Professionally modified and balanced driveshaft from TheDriveShaftShop in San Pedro
-Dakota digital gauge cluster (factory face for m30, but works with rb25det engine as if factory)
-Custom top plates on top of BC S13 coilovers made to fit the m30
-5 speed conversion using S13 master and pedal, with Circuit Sports conversion line (No m30 came 5speed stateside)
-Custom wire harness RB25DET to m30 chassis
-Custom Power steering hose RB25det to M30 rack
-Modified s13 spindles and lower control arms (all the angles)
-Voodoo S13 front tension rods
-Welded rear differential
-Some Original Intercooler piping, w/HKS SSQV BOV & Apexi air filter
-Comes with 2 RB25DET ECU’s
-Front tires are brand new
-Aftermarket Steering wheel
-Walbro 255lph fuel pump
-Large front mount intercooler still in car
Cons:
-The car was parked by the previous owner after the engine was running rough, and subsequently, the transmission was used on another drift project he had. I have the original engine, which was disassembled and inspected found #6 piston ringland had failed causing the misfire. Engine is included with sale
-Bumpers on the car are paint chipped and cracked/broken. They have been painted but need to be replaced. looks good from far, but far from good.
-Hood and mounting bracket is damaged from hood flying up while drifting (didn’t damage car or roof at all somehow. Could find one at a junk yard or with the M30 community)
-Seats have covers on them because the leather is basically destroyed underneath.
Summary:
-If you wanted to drive this car you would need an RB transmission, the rb25 put back together or a JDM one, and a cooling/radiator system.
-My hope is someone will get this car and restore it to how it was in 2009 when it was featured in Project car magazine and featured in a speedhunters article.
The first few pictures are of the car when it was featured years ago, the last few are of the car now.
Thanks for looking
https://i.imgur.com/0FnHazg.jpg
https://i.imgur.com/eIWLCbj.jpg
https://i.imgur.com/bQqzass.jpg
https://i.imgur.com/SBsFbxg.jpg
https://i.imgur.com/NDHJgux.jpg
https://i.imgur.com/vVNDuTm.jpg
https://i.imgur.com/llceaKh.jpg
https://i.imgur.com/2iyM2HU.jpg
https://i.imgur.com/13mliHY.jpg
https://i.imgur.com/d1a1pg8.jpg