Fitelite240!!
07-01-2019, 03:33 PM
I've got a set of 4 old LMGT4's that's seen better days. 18 x 8.5 +30 (x4) square set up.
When I got them from the owner, 1 of the wheels had a crack in it and the other with a smaller crack but terribly welded and "fixed" (pictures attached), these wheels since then have been repaired professionally by Wheel Repair Specialists in Deerfield Beach FL by Aaron and his awesome crew (pictures attached). the wheels have been spun and runout was fixed to read 0-10k on top and bottom.
My plans were to get the powder coated volk bronze but other expensive parts of the build have now come up.
The wheels have rash on them and will be thoroughly cleaned for the next owner. The rash can be fixed by any reputable powder coating and wheel detailing company.
I was quoted 400 for the volk bronze (which includes chemical strip,sandblast,wash,pre bake, coat and then final bake, with a 3 day cure time) and if the buyer wants me to get it done. I'll gladly do it, but the price will go up and I'll need a deposit of half the amount at that point, to avoid the buyer backing out after the work being done.
The wheels will come with 4 tested and OEM Nissan TPMS air sensors and new Nismo stickers and Ray's valve stem caps.
Current price as is, as of 9/1/2019 is $1800 shipped + PP fees from FL. Price is set lower than current market price because the future seller will have a some work to do to make them MINT. With the powder coat job and fixing the rash. This would be a set for $23-2400 which is pretty hard to find in a set of LMGT4s. $2600, with original Ray's factory stickers that I can order.
If you want to own a set of LMGT4s without spending 3k and up this would the way to go with a little elbow grease. All wheels roll straight and can be used immediately if you want.
--------------
I'd be down for an equal trade of a set of either
SSR GTV02 18x 10.5J +15 square set (color doesn't matter but, black preferred)
Or
Enkei RS05-RR 18 x 10.5 +15 square set (color doesn't matter but, black preferred)
-----------------
Pictures links attached below:
https://ibb.co/ZfZfNhK - Barrels (Left side)
https://ibb.co/f1V4y6r - Barrels (Right side)
https://ibb.co/RCGRMv0 - Rays Engineering stamp Wheel 1
https://ibb.co/KsmpLFX - 18 x 8.5 J stamp Wheel 1
https://ibb.co/TbN86r1 - Rays Engineering stamp Wheel 2
https://ibb.co/7XMKPB8 - 18 x 8.5 J stamp Wheel 2
https://ibb.co/4przbZD - Rays Engineering stamp Wheel 3
https://ibb.co/Hxc1ckb - 18 x 8.5 J stamp Wheel 3
https://ibb.co/Hr65G0H -Rays Engineering stamp Wheel 4
https://ibb.co/GJJ3101 - 18 x 8.5 J stamp Wheel 4
https://ibb.co/Rb6cVjd - Made In Japan Stamp
https://ibb.co/ygmFw4n - Forged MonoBlock Stamp
https://ibb.co/VmLS5nH - Wheel 1 Face
https://ibb.co/mtpBRpq - Wheel 2 Face
https://ibb.co/LY3mN00 - Wheel 3 Face
https://ibb.co/3Tsvbn3 - Wheel 4 Face
https://ibb.co/w6ChnQr - Nismo Stickers, TMPS sensors
https://ibb.co/BLLX8NC - Fixed Crack on Wheel 1 with black paint over it to prevent any corrosion, inside the barrel
https://ibb.co/kDG0fnx - Fixed Crack on Wheel 1 with black paint over it to prevent any corrosion, outside the barrel
https://ibb.co/0ZtLLmY - Fixed Crack on Wheel 1 with black paint over it to prevent any corrosion, outside the barrel (PIC 2)
https://ibb.co/m6c4dJ2 - Fixed Crack on Wheel 2 with black paint over it to prevent any corrosion, inside the barrel
https://ibb.co/2S2kttv - Fixed Crack on Wheel 2 with black paint over it to prevent any corrosion, outside the barrel
https://ibb.co/N9DYv6Z - All 4 backs of the wheels
https://ibb.co/ZLG1bK3 - All 4 fronts of the wheels
https://ibb.co/WPFnvYT - Fixed Crack on Wheel 1 with black paint over it to prevent any corrosion, outside the barrel (PIC 3- This was right after the work was done)
https://ibb.co/sJDj4bQ - Fixed Crack on Wheel 2 with black paint over it to prevent any corrosion, inside the barrel (PIC 2- This was right after the work was done)
https://ibb.co/pKzM6MS - Fixed Crack on Wheel 1 with black paint over it to prevent any corrosion, inside the barrel (PIC 2 - This was right after the work was done)
https://ibb.co/XDz1z2z - Fixed Crack on Wheel 2 with black paint over it to prevent any corrosion, outside the barrel (PIC 2- This was right after the work was done)
https://ibb.co/R62rPFK - Original Crack on wheel 1
https://ibb.co/r5mrsZW - Original Crack on wheel 1 (PIC 2)
https://ibb.co/yXzrw6R - Original Crack on wheel 1 (PIC 3)
https://ibb.co/9qxM3df - Original Crack on wheel 2
https://ibb.co/0FzZDzV - Original Crack on wheel 2 (PIC 2)
When I got them from the owner, 1 of the wheels had a crack in it and the other with a smaller crack but terribly welded and "fixed" (pictures attached), these wheels since then have been repaired professionally by Wheel Repair Specialists in Deerfield Beach FL by Aaron and his awesome crew (pictures attached). the wheels have been spun and runout was fixed to read 0-10k on top and bottom.
My plans were to get the powder coated volk bronze but other expensive parts of the build have now come up.
The wheels have rash on them and will be thoroughly cleaned for the next owner. The rash can be fixed by any reputable powder coating and wheel detailing company.
I was quoted 400 for the volk bronze (which includes chemical strip,sandblast,wash,pre bake, coat and then final bake, with a 3 day cure time) and if the buyer wants me to get it done. I'll gladly do it, but the price will go up and I'll need a deposit of half the amount at that point, to avoid the buyer backing out after the work being done.
The wheels will come with 4 tested and OEM Nissan TPMS air sensors and new Nismo stickers and Ray's valve stem caps.
Current price as is, as of 9/1/2019 is $1800 shipped + PP fees from FL. Price is set lower than current market price because the future seller will have a some work to do to make them MINT. With the powder coat job and fixing the rash. This would be a set for $23-2400 which is pretty hard to find in a set of LMGT4s. $2600, with original Ray's factory stickers that I can order.
If you want to own a set of LMGT4s without spending 3k and up this would the way to go with a little elbow grease. All wheels roll straight and can be used immediately if you want.
--------------
I'd be down for an equal trade of a set of either
SSR GTV02 18x 10.5J +15 square set (color doesn't matter but, black preferred)
Or
Enkei RS05-RR 18 x 10.5 +15 square set (color doesn't matter but, black preferred)
-----------------
Pictures links attached below:
https://ibb.co/ZfZfNhK - Barrels (Left side)
https://ibb.co/f1V4y6r - Barrels (Right side)
https://ibb.co/RCGRMv0 - Rays Engineering stamp Wheel 1
https://ibb.co/KsmpLFX - 18 x 8.5 J stamp Wheel 1
https://ibb.co/TbN86r1 - Rays Engineering stamp Wheel 2
https://ibb.co/7XMKPB8 - 18 x 8.5 J stamp Wheel 2
https://ibb.co/4przbZD - Rays Engineering stamp Wheel 3
https://ibb.co/Hxc1ckb - 18 x 8.5 J stamp Wheel 3
https://ibb.co/Hr65G0H -Rays Engineering stamp Wheel 4
https://ibb.co/GJJ3101 - 18 x 8.5 J stamp Wheel 4
https://ibb.co/Rb6cVjd - Made In Japan Stamp
https://ibb.co/ygmFw4n - Forged MonoBlock Stamp
https://ibb.co/VmLS5nH - Wheel 1 Face
https://ibb.co/mtpBRpq - Wheel 2 Face
https://ibb.co/LY3mN00 - Wheel 3 Face
https://ibb.co/3Tsvbn3 - Wheel 4 Face
https://ibb.co/w6ChnQr - Nismo Stickers, TMPS sensors
https://ibb.co/BLLX8NC - Fixed Crack on Wheel 1 with black paint over it to prevent any corrosion, inside the barrel
https://ibb.co/kDG0fnx - Fixed Crack on Wheel 1 with black paint over it to prevent any corrosion, outside the barrel
https://ibb.co/0ZtLLmY - Fixed Crack on Wheel 1 with black paint over it to prevent any corrosion, outside the barrel (PIC 2)
https://ibb.co/m6c4dJ2 - Fixed Crack on Wheel 2 with black paint over it to prevent any corrosion, inside the barrel
https://ibb.co/2S2kttv - Fixed Crack on Wheel 2 with black paint over it to prevent any corrosion, outside the barrel
https://ibb.co/N9DYv6Z - All 4 backs of the wheels
https://ibb.co/ZLG1bK3 - All 4 fronts of the wheels
https://ibb.co/WPFnvYT - Fixed Crack on Wheel 1 with black paint over it to prevent any corrosion, outside the barrel (PIC 3- This was right after the work was done)
https://ibb.co/sJDj4bQ - Fixed Crack on Wheel 2 with black paint over it to prevent any corrosion, inside the barrel (PIC 2- This was right after the work was done)
https://ibb.co/pKzM6MS - Fixed Crack on Wheel 1 with black paint over it to prevent any corrosion, inside the barrel (PIC 2 - This was right after the work was done)
https://ibb.co/XDz1z2z - Fixed Crack on Wheel 2 with black paint over it to prevent any corrosion, outside the barrel (PIC 2- This was right after the work was done)
https://ibb.co/R62rPFK - Original Crack on wheel 1
https://ibb.co/r5mrsZW - Original Crack on wheel 1 (PIC 2)
https://ibb.co/yXzrw6R - Original Crack on wheel 1 (PIC 3)
https://ibb.co/9qxM3df - Original Crack on wheel 2
https://ibb.co/0FzZDzV - Original Crack on wheel 2 (PIC 2)