C. Anderson
03-15-2019, 04:32 PM
These parts are for swapping an LS into an S14.
-Custom 1.34 inch stainless swap headers
These have O2 sensor bungs, Vibrant 3 inch stainless v-band flanges, GM
performance multi layer steel manifold gaskets, and ARP stainless bolts.The
driver side manifold comes apart in 2 pieces to install/uninstall without the
need of removing the steering column. One runner has a small ding and
one runner has a hole drilled for an EGT sensor which are both pictured.
-Street Elite Performance Stainless S14 engine mounts w/ custom trans
mount
The engine mounts come with stainless hardware and the trans mount
comes with a T56 Energy Suspension polyurethane bushing.
-Wilwood 0.75 inch clutch master cylinder
This includes the adapter plate for s-chassis, -3 steel braided clutch line,
and clutch fork for the pedal arm.
-1 piece 3 inch aluminum driveshaft for T56
I have a full 3 inch dual exhaust with x pipe and resonators that will come with everything if you pick up. If I have to ship, I will cut the v-band flanges off the exhaust to include with the manifolds.
https://i.ibb.co/GtvqsG9/20190315-161404.jpg (https://ibb.co/Yy7xDJX)
https://i.ibb.co/vv1tTdT/20190315-161441.jpg (https://ibb.co/1JZSPXP)
https://i.ibb.co/d2hkFzc/20190315-161448.jpg (https://ibb.co/zRkPp05)
https://i.ibb.co/1QWWDXc/20190315-161501.jpg (https://ibb.co/V9447C6)
https://i.ibb.co/QMzHhTH/20190315-161510.jpg (https://ibb.co/bXqvYCv)
https://i.ibb.co/kyZrcwf/20190315-161528.jpg (https://ibb.co/BPk7sQx)
https://i.ibb.co/4Rq5BRh/20190315-161639.jpg (https://ibb.co/qYSPbYT)
https://i.ibb.co/QYcdLjp/20190315-161712-003.jpg (https://ibb.co/3Ssz2Y4)
https://i.ibb.co/5xq3YpJ/20190315-161715.jpg (https://ibb.co/CsxyJCS)
https://i.ibb.co/9pGTkV3/20190315-161742.jpg (https://ibb.co/8mX5Ld4)
https://i.ibb.co/BcY92GB/20190315-161820.jpg (https://ibb.co/q72vYCp)
https://i.ibb.co/9tw3v7N/20190315-161932.jpg (https://ibb.co/16sJnkL)
I am not parting this out at the moment.
$900 shipped plus paypal fees.
-Custom 1.34 inch stainless swap headers
These have O2 sensor bungs, Vibrant 3 inch stainless v-band flanges, GM
performance multi layer steel manifold gaskets, and ARP stainless bolts.The
driver side manifold comes apart in 2 pieces to install/uninstall without the
need of removing the steering column. One runner has a small ding and
one runner has a hole drilled for an EGT sensor which are both pictured.
-Street Elite Performance Stainless S14 engine mounts w/ custom trans
mount
The engine mounts come with stainless hardware and the trans mount
comes with a T56 Energy Suspension polyurethane bushing.
-Wilwood 0.75 inch clutch master cylinder
This includes the adapter plate for s-chassis, -3 steel braided clutch line,
and clutch fork for the pedal arm.
-1 piece 3 inch aluminum driveshaft for T56
I have a full 3 inch dual exhaust with x pipe and resonators that will come with everything if you pick up. If I have to ship, I will cut the v-band flanges off the exhaust to include with the manifolds.
https://i.ibb.co/GtvqsG9/20190315-161404.jpg (https://ibb.co/Yy7xDJX)
https://i.ibb.co/vv1tTdT/20190315-161441.jpg (https://ibb.co/1JZSPXP)
https://i.ibb.co/d2hkFzc/20190315-161448.jpg (https://ibb.co/zRkPp05)
https://i.ibb.co/1QWWDXc/20190315-161501.jpg (https://ibb.co/V9447C6)
https://i.ibb.co/QMzHhTH/20190315-161510.jpg (https://ibb.co/bXqvYCv)
https://i.ibb.co/kyZrcwf/20190315-161528.jpg (https://ibb.co/BPk7sQx)
https://i.ibb.co/4Rq5BRh/20190315-161639.jpg (https://ibb.co/qYSPbYT)
https://i.ibb.co/QYcdLjp/20190315-161712-003.jpg (https://ibb.co/3Ssz2Y4)
https://i.ibb.co/5xq3YpJ/20190315-161715.jpg (https://ibb.co/CsxyJCS)
https://i.ibb.co/9pGTkV3/20190315-161742.jpg (https://ibb.co/8mX5Ld4)
https://i.ibb.co/BcY92GB/20190315-161820.jpg (https://ibb.co/q72vYCp)
https://i.ibb.co/9tw3v7N/20190315-161932.jpg (https://ibb.co/16sJnkL)
I am not parting this out at the moment.
$900 shipped plus paypal fees.