SR20VET VVL Turbo Partout by 5523 Motorsport | Bardabe Performance | JWT

[bardabe]

Hey Guys,

This year i have lots going on, I originally thought I'd be able to finish my Neo VVL competition time attack car, my move to Texas and get my R32 GT-R going. Unfortunately i took on a bit more than I could chew on all while maintaining my sanity. With that said I'm cutting the stable down to one shop car rather than 3 and so the SR20VE is one of the projects that will go.

The engine is brand new and currently not assembled, everything is still sealed in bags from the second to final assembly process. This means one last wipe down and inspection putting everything on the assembly bench and then put it all together. All parts are brand new, never been used. Everything has been blue printed and recorded I was planning to compete with this engine in both GTA & Gridlife so it was built for reliability and response.

Lot of all parts to assemble short block $SOLD

JE Pistons 86.5MM (WPC Treated)
https://www.bardabe.com/wp-content/uploads/2019/05/JE_Pistons_WPC.jpg
https://www.bardabe.com/wp-content/uploads/2019/05/JE_pistons_WPC2.jpg

K1 Technologies Rods (WPC Treated)
https://www.bardabe.com/wp-content/uploads/2019/05/K1_Rods.jpg

OEM Nissan SR20VE N1 Oil Pump (WPC Treated)
https://www.bardabe.com/wp-content/uploads/2019/05/13500-1N501_WPC_2.jpg
https://www.bardabe.com/wp-content/uploads/2019/05/13500-1N501_WPC.jpg

Brand New Nissan Timing Components
https://www.bardabe.com/wp-content/uploads/2019/05/SR20_Timing_kit.jpg

Brand New Nissan Block Breather Vent
Brand New Nissan Block water Pipe
https://www.bardabe.com/wp-content/uploads/2019/05/SR20_breather_pipes.jpg

OEM Nissan Main Bearings (WPC Treated)
OEM Nissan Rod Bearings (WPC Treated)
OEM Nissan Thrust Washers (WPC Treated)
https://www.bardabe.com/wp-content/uploads/2019/05/SR20_bearings.jpg

OEM Nissan Oil Squirters
https://www.bardabe.com/wp-content/uploads/2019/05/11560-1E000_BlockAccessory.jpg

OEM Nissan Crankshaft (WPC Treated)
S14 SR20DET Block
OEM Nissan Main Bolts
https://www.bardabe.com/wp-content/uploads/2019/05/SR20_bare_block.jpg

All new Freeze plugs, welch plugs and tapered pipe plugs.
Machine work done:
Oil feed for VCT has been tapped for 1/16 NPT Plug on block
Rear Oil Drain on Block was tapped for 1/2NPT Plug
Block was Torque plate honed
PDC Surfaced and matched with front cover.
Checked for main bearing journal straightness
Crankshaft was Cleaned, Mag'd for cracks, detailed, checked for straightness, chamfered oil passages, balanced with complete rotating assembly, and detailed.
Complete Rotating assembly was balanced

The following parts have been WPC treated for longevity and added insurance.

Pistons
Piston Rings
Piston Wrist Pins
Connecting Rods
Bearings
Thrust Washers
Crankshaft
Oil Pump
Oil Pump Housing (inside)
Oil Pump Driver
Timing Chain Sprocket (lower)
Crankshaft

VVL Swap parts
Brand New Nissan P12 CAS $275
P11 Lower Manifold & Upper manifold with accessories (iacv, throttle body etc) $150


Cooling Parts:
Brand New S15 Water Pump SOLD
https://www.bardabe.com/wp-content/uploads/2019/05/21010-65F27.jpg
Nismo thermostat (used) $50
Yashio Factory Water Pump Pulley SOLD

Other parts
Brand new P11 Valve Cover $100

I accept all forms of credit card, venmo, and cash as valid payment option. Only checks that will be accepted is verified cashier's check. (and will only release engine once the payment has cleared my bank institution)[/B]

here is currently where the engine stands.
https://www.bardabe.com/wp-content/uploads/2019/03/parts_bench2.jpg

Any questions or concerns please do not hesitate to reach out, ( [email protected] or (951)708-1648 )I'll do my best to answer any questions serious buyers may have.

[Supergoji]

Omfg somebody buy this

[Kouki_monstr]

Legit dude, no short cuts , attention to detail, buy with confidence! Good luck buddy

[tacotacotaco]

fuck let me sell a kidney

[2_Liter_Turbo]

Is the head machined for larger head studs, or factory sized (saw that you had mazworx studs, so I was unsure if they were the oversized ones).

[bardabe]

fuck let me sell a kidney

credit cards won't have as big of an impact on your health lol

Is the head machined for larger head studs, or factory sized (saw that you had mazworx studs, so I was unsure if they were the oversized ones).

Factory sized studs, Both Nick & Clark saw no need to go oversized.

[bardabe]

Cylinder Head Pending to 2_Liter_Turbo

That means, Block & All other VVL Swap components are up for grabs. Will modify original post of clutter to make it cleaner for you guys to read.

[da_crew10]

This... is.... bad... fucking....ass!

[bardabe]

Updated List. To the top!

[s13silvia123]

why can't you sell this in the fall when cash is plenty for me. jaun if no one buys this coming fall i'll hit you up for the complete short block.

[d9m13n]

If I hadnt just dropped everything off at my machine shop the bottom end would be mine..

Ive been really stoked on this build since I first started following the build thread, sad to see it wont come to fruition. Best of luck with the move and the r32!

[bardabe]

why can't you sell this in the fall when cash is plenty for me. jaun if no one buys this coming fall i'll hit you up for the complete short block.

Just put it on the credit card, pay it off in the fall.

If I hadnt just dropped everything off at my machine shop the bottom end would be mine..

Ive been really stoked on this build since I first started following the build thread, sad to see it wont come to fruition. Best of luck with the move and the r32!

Yeah dude I’m bummed I had to do this but have to focus on the bigger picture. Which means personal cars don’t get as much time or money.


Head is sold , short block and VVL parts are still available.

[bardabe]

bump.......

[bardabe]

.... short block part out fuck it.

[bardabe]

to the tooop.

[stack-kat]

Nooooo dont leave [emoji22]

Sent from my SM-G955U using Tapatalk

[bardabe]

Nooooo dont leave [emoji22]

Sent from my SM-G955U using Tapatalk

sorry buddy, california doesn't like tuning shops :( gotta go.

BUMP someone has to need an engine.

[bardabe]

well parts are going up on ebay.

[Dboyizmlg]

If this was for sale 6 months ago, I would of snagged it!

[HayabusaKLR]

You have a PM on the long block!

[brndck]

You have a PM on the long block!

he sold the head already

[HayabusaKLR]

he sold the head already

Got it, damnit. Still interested in the built short block.

[brndck]

Got it, damnit. Still interested in the built short block.

its still a damn good deal on the short block.

[HayabusaKLR]

its still a damn good deal on the short block.
100% agree, trying to get ahold of him but no luck yet. Hoping it hasn’t been parted out yet.

[2_Liter_Turbo]

100% agree, trying to get ahold of him but no luck yet. Hoping it hasn’t been parted out yet.

Definitely give him a minute, he is in the middle of a big company move, so he's been slammed! Real good dude to work with.

[RalliartRsX]

100% agree, trying to get ahold of him but no luck yet. Hoping it hasn’t been parted out yet.

Sent him a text. If he hasn't already spoken to you, he should be heading your way shortly

[bardabe]

You have a PM on the long block!
You have reply good sir thank you for reaching out!

he sold the head already
I did it went to a good home though.


Definitely give him a minute, he is in the middle of a big company move, so he's been slammed! Real good dude to work with.

I see the light at the end of the tunnel it’s getting brighter. Much appreciate the kind words sir!

Sent him a text. If he hasn't already spoken to you, he should be heading your way shortly

Thanks dude! You’re rad much much appreciated.

[bardabe]

bump, pictures added parting out entirely at this point.

[jbrowne]

Price on ATI Damper?

[2_Liter_Turbo]

Price on ATI Damper?

It's been sold.

[bardabe]

So, I'm toying with the idea of raffling this thing out. $50 decals will need to sell 80 of them to cover all the fees for transactions, shipping etc, who would all be down for this?

[bardabe]

Block sold, anyone need a CAS?