EthanR
02-19-2019, 09:01 AM
Unfortunately things come up in life, so I'm downgrading back to something less-cool.
I'm selling my full STACK gauge cluster that I made for my JZX100. This is perfect for you JZX100 guys if there are any here, but of course this setup is 100% universal and can be fitted to any car.
Everything is fitted to a factory Toyota JZX100 cluster with a custom carbon-fiber surround. The cluster has all factory mounting points and is very solid. I believe this works for JZX90 as well.
I purchased everything brand new from STACK, and everything has been in my car for about 3k miles. Everything is in 10/10 condition. The cluster has no scratches, etc.
The STACK harness is uncut, which is fairly rare because usually everyone cuts them to whatever length they need - I did not in case I ever needed to sell it. It uses the factory STACK spade connectors, but of course you can trim them off and use whatever you'd like.
All sensors and everything needed for install is included.
Here's all that comes with it:
STACK ST8130, 8k RPM, UK version. Reads in MPH, PSI and Celsius.
STACK ST269589 - this is a PnP GPS speed sensor. It hooks directly into the STACK harness, you can toss the sensor on your dash and it picks up signal immediately when the car is turned on. This makes things 1000000% easier than trying to tie the stack system into your factory speed sensor. It reads accurately and I’ve never ever had signal issues.
STACK ST3362 Boost Gauge - this is an electronic boost gauge - not a mechanical one. Super nice and compliments the cluster perfectly. Though I believe the cluster itself has a boost option, I prefer a sweeping gauge.
I've replaced the cheap-feeling STACK buttons for high-quality black anodized buttons. They have a super satisfying click to them and each one has it's own removable wiring harness. I think I have the STACK buttons laying around still, so I can toss them in if I do.
There are turn signal indicators on either side of the cluster (left and right ofc) that light up white. On the left side there is a e-brake up indicator, and on the right side, a hi-beam indicator.
$SOLD. You can PM me on here or shoot me a DM on instagram (heavensfourdoor) if you have any questions or would like more information.
Thanks for looking!
https://i.imgur.com/DT2rhXM.jpghttps://i.imgur.com/cPfnfVU.jpghttps://i.imgur.com/97FeW8O.jpg
I'm selling my full STACK gauge cluster that I made for my JZX100. This is perfect for you JZX100 guys if there are any here, but of course this setup is 100% universal and can be fitted to any car.
Everything is fitted to a factory Toyota JZX100 cluster with a custom carbon-fiber surround. The cluster has all factory mounting points and is very solid. I believe this works for JZX90 as well.
I purchased everything brand new from STACK, and everything has been in my car for about 3k miles. Everything is in 10/10 condition. The cluster has no scratches, etc.
The STACK harness is uncut, which is fairly rare because usually everyone cuts them to whatever length they need - I did not in case I ever needed to sell it. It uses the factory STACK spade connectors, but of course you can trim them off and use whatever you'd like.
All sensors and everything needed for install is included.
Here's all that comes with it:
STACK ST8130, 8k RPM, UK version. Reads in MPH, PSI and Celsius.
STACK ST269589 - this is a PnP GPS speed sensor. It hooks directly into the STACK harness, you can toss the sensor on your dash and it picks up signal immediately when the car is turned on. This makes things 1000000% easier than trying to tie the stack system into your factory speed sensor. It reads accurately and I’ve never ever had signal issues.
STACK ST3362 Boost Gauge - this is an electronic boost gauge - not a mechanical one. Super nice and compliments the cluster perfectly. Though I believe the cluster itself has a boost option, I prefer a sweeping gauge.
I've replaced the cheap-feeling STACK buttons for high-quality black anodized buttons. They have a super satisfying click to them and each one has it's own removable wiring harness. I think I have the STACK buttons laying around still, so I can toss them in if I do.
There are turn signal indicators on either side of the cluster (left and right ofc) that light up white. On the left side there is a e-brake up indicator, and on the right side, a hi-beam indicator.
$SOLD. You can PM me on here or shoot me a DM on instagram (heavensfourdoor) if you have any questions or would like more information.
Thanks for looking!
https://i.imgur.com/DT2rhXM.jpghttps://i.imgur.com/cPfnfVU.jpghttps://i.imgur.com/97FeW8O.jpg