_n3
01-07-2019, 12:46 PM
Shipping everything here USPS generally speaking. Prices are not including shipping+pp fees. Will discount multiple parts.
I have a Nistune setup, and bought parts for that, but decided to go standalone so I don't need the z32 maf, avc-r, and a few other things. o2 housing didn't fit my custom downpipe, so i never used it. Items are used unless stated otherwise.
$offer Pair of RED Bride Brix 1.5 with Bride rails (fit S13 driver+passenger)
$offer Bride Zeta III with Nagisa rails
$400 Z32 ECU with Nistune Type 2 Board
This is a Z32 ECU, which was reccommended instead of the original RB25DET ECU to be paired with the Nistune Type 2 board. The modifications were made to the board so that you don't have to do them in the wiring, which was just cutting a trace, bridging a connection, and adding a resistor. (Z32 TT has two o2 sensors instead of one that the rb25 has, so it was bridged.) I forget what other modifications were done, but you can check on their site to see, as they have a PDF on how to do it. Board was socketed, and type 2 board was installed by an IPC J-STD-001 certified installer. (Me) Comes with Offbrand "conzult" cable used for interfacing and flashing with it. I've read it isn't the best versus the PLMS cable since it doesn't mitigate noise. Depends on your electrical setup. (https://www.plmsdevelopments.com/index.php/consult-cables) Does not come with nistune software license. I was able to debug and crack the nistune software myself and use it. Just the chipped ECU and cable.
$60 Z32 MAF with brand new pigtail
https://i.postimg.cc/LhKnqk5c/maf.jpg
I believe MAF is used but screens are not broken anywhere.
$SOLD Apexi AVC-R Electronic Boost Controller
https://i.postimg.cc/X7mg8tBW/avcr.jpg
MORE AVC-R Pics: https://mega.nz/#F!edEBjaba!COX2fTeDeB2m5c1jXlvl4g
Blue/Silver. Comes with two hardesses. (One I had was chopped up and dirty, so I bought a brand new one, and just extended the connections with new wires. Didn't chop it up.)
$150 AEM UEGO 4.9 Wideband. NEW Sealed in box. PN: 30-4110
https://i.postimg.cc/Cx5WByTV/tease.jpg
$100 AEM 3-port Boost controller. NEW Sealed in box. PN: AEM-30-2400
Edit: I just checked and the box seal is broken. I never opened this but since the seal was broken I opened it to check the contents, and the boost controller is still in its bag, which is sealed. Not sure how the actual box seal was broken.
$120 Forge Motorsports BPV. (Recirc) Used for <2000 miles
Model: FMDVK04S - Fits Ford Focus ST, Volvo S60, Volvo V70R, OPC Insignias, Buick Regal Turbos https://snag.gy/rpAKEJ.jpg
$120 Duralast 24-DLG Battery. Bought a couple years ago, got a free optoma yellowtop, so it's been on the tender inside temperature controlled since then. Very little use. (Local pickup near Cleveland)
$SOLD RB25 speed sensor
$40 RB25 slave cylinder http://i.snag.gy/9SE8r.jpg
$100 s13 ISR Performance RB swap o2 housing NEW
$80 s13 pop up assemblies including the motors (both sides) http://i.snag.gy/Ps5qH.jpg http://i.snag.gy/r7irQ.jpg
$20 s13 inner and outer tie rods. bushings are torn.. http://i.snag.gy/Vg6Zs.jpg
$20 s13 rear brake assemblies. needs rebuilt. http://i.snag.gy/AAm1s.jpg
$60 300zx/z32 rotors
two front rotors. brand new from 88rotors. http://i.snag.gy/sR5O9.jpg http://i.snag.gy/kYz4t.jpg http://i.snag.gy/ieK24.jpg
$40 Jensen VM9410
Comes with harness. Flip up screen. Backup camera and video inputs. Nice unit. I'm running no radio at all now though. also comes with remote. (not pictured) http://i.snag.gy/D56hK.jpg
$20 FTDI OBD2 flash cable NEW This one has a "Trifecta EZ-Flash" sticker branding sticker on it. Same cable as any other FTDI one though.
$10 8mm spacers.
I have a Nistune setup, and bought parts for that, but decided to go standalone so I don't need the z32 maf, avc-r, and a few other things. o2 housing didn't fit my custom downpipe, so i never used it. Items are used unless stated otherwise.
$offer Pair of RED Bride Brix 1.5 with Bride rails (fit S13 driver+passenger)
$offer Bride Zeta III with Nagisa rails
$400 Z32 ECU with Nistune Type 2 Board
This is a Z32 ECU, which was reccommended instead of the original RB25DET ECU to be paired with the Nistune Type 2 board. The modifications were made to the board so that you don't have to do them in the wiring, which was just cutting a trace, bridging a connection, and adding a resistor. (Z32 TT has two o2 sensors instead of one that the rb25 has, so it was bridged.) I forget what other modifications were done, but you can check on their site to see, as they have a PDF on how to do it. Board was socketed, and type 2 board was installed by an IPC J-STD-001 certified installer. (Me) Comes with Offbrand "conzult" cable used for interfacing and flashing with it. I've read it isn't the best versus the PLMS cable since it doesn't mitigate noise. Depends on your electrical setup. (https://www.plmsdevelopments.com/index.php/consult-cables) Does not come with nistune software license. I was able to debug and crack the nistune software myself and use it. Just the chipped ECU and cable.
$60 Z32 MAF with brand new pigtail
https://i.postimg.cc/LhKnqk5c/maf.jpg
I believe MAF is used but screens are not broken anywhere.
$SOLD Apexi AVC-R Electronic Boost Controller
https://i.postimg.cc/X7mg8tBW/avcr.jpg
MORE AVC-R Pics: https://mega.nz/#F!edEBjaba!COX2fTeDeB2m5c1jXlvl4g
Blue/Silver. Comes with two hardesses. (One I had was chopped up and dirty, so I bought a brand new one, and just extended the connections with new wires. Didn't chop it up.)
$150 AEM UEGO 4.9 Wideband. NEW Sealed in box. PN: 30-4110
https://i.postimg.cc/Cx5WByTV/tease.jpg
$100 AEM 3-port Boost controller. NEW Sealed in box. PN: AEM-30-2400
Edit: I just checked and the box seal is broken. I never opened this but since the seal was broken I opened it to check the contents, and the boost controller is still in its bag, which is sealed. Not sure how the actual box seal was broken.
$120 Forge Motorsports BPV. (Recirc) Used for <2000 miles
Model: FMDVK04S - Fits Ford Focus ST, Volvo S60, Volvo V70R, OPC Insignias, Buick Regal Turbos https://snag.gy/rpAKEJ.jpg
$120 Duralast 24-DLG Battery. Bought a couple years ago, got a free optoma yellowtop, so it's been on the tender inside temperature controlled since then. Very little use. (Local pickup near Cleveland)
$SOLD RB25 speed sensor
$40 RB25 slave cylinder http://i.snag.gy/9SE8r.jpg
$100 s13 ISR Performance RB swap o2 housing NEW
$80 s13 pop up assemblies including the motors (both sides) http://i.snag.gy/Ps5qH.jpg http://i.snag.gy/r7irQ.jpg
$20 s13 inner and outer tie rods. bushings are torn.. http://i.snag.gy/Vg6Zs.jpg
$20 s13 rear brake assemblies. needs rebuilt. http://i.snag.gy/AAm1s.jpg
$60 300zx/z32 rotors
two front rotors. brand new from 88rotors. http://i.snag.gy/sR5O9.jpg http://i.snag.gy/kYz4t.jpg http://i.snag.gy/ieK24.jpg
$40 Jensen VM9410
Comes with harness. Flip up screen. Backup camera and video inputs. Nice unit. I'm running no radio at all now though. also comes with remote. (not pictured) http://i.snag.gy/D56hK.jpg
$20 FTDI OBD2 flash cable NEW This one has a "Trifecta EZ-Flash" sticker branding sticker on it. Same cable as any other FTDI one though.
$10 8mm spacers.