AE_Racer
12-11-2018, 04:07 PM
SOLD pending payment
Location: Jax, FL
Price: $3200
I bought an FD RX7 and no longer need this. Buy it or trade me cool 18x9.5-18x10 wheels + cash. I can keep the advans and take some off the price.
Car: 1989 CRX Si - originally Y49
Mods/Condition:
EF8 SIR Front end and back bumper, clear oem/stanley front corners
replica j's racing front lip
advan rg 15x6.5 +34 with 195/50 dz102 (a few thousand miles on the tires)
rays/volk black steel lug nuts
original crx si wheels with 2 bad tires go with car
full set of OEM mudflaps go with car
I also have a brand new "HONDA" sticker and "Si" badge that go with the car.
H4H HID kit, not some H4's rammed in there.
engine:
B16A with YS1 trans (no LSD stamp, that I know of)
OBD1, PR3 ECU. not tuned to my knowledge
Sleeved wiring harness, semi tucked.
factory IM and exhaust manifold, has an unknown catback, sounds good but rattles at high rpm
hasport mounts, shift linkage seems to be OEM
Runs great, cant see smoke while driving but does give an oil smell on decel and driving hard.
suspension:
innovative traction bar, driven twice since install. not the super latest version, have original brace to go with car
function form coilovers (300 miles maybe, have a blown set of skunk2 pro-c coils to go with car)
skunk2 front upper control arms
skunk2 rear camber arm
asr rear subframe brace
interior:
recently put new speakers in doors, rears need to be replaced.
will come with a knockoff mugen shift knob
CONS:
- Car is wrapped 3M sunflower yellow, its my 2nd wrap so not the best. Roof has seams where there shouldnt be as I was using scraps at the end. I planned to bring the wrap down the bumpers like the OEM paint but I ran out.
- Front end is in primer underneath and obviously the rear bumper is black.
- Has some rust in normal spots, driver quarter under glass, bubbling on sunroof, fuel door etc. Worst is under the quarter glass, there's two holes that were covered with some body work taped and wrapped over. I have attached a photo showing one of them
- Car needs new seats or recovering as shown
- Missing passenger floor mat
- Missing spare tire, jack, tools, cardboard but carpet is back there
- Driver kick panel is broken, missing passenger floor mat and climate control is cracked
- Missing a/c from firewall forward, no lines, condensor, engine bracket or anything.
-Cracked windshield about halfway across, doesn't bother me much while driving and isn't spidered out.
- sunroof does not work
- Tint is purple and bubbling, its really old.
https://i.imgur.com/LEOpTm8l.jpg
https://i.imgur.com/dKTcXUOl.jpg
Album with more pics: https://imgur.com/a/O1mLHhk
Location: Jax, FL
Price: $3200
I bought an FD RX7 and no longer need this. Buy it or trade me cool 18x9.5-18x10 wheels + cash. I can keep the advans and take some off the price.
Car: 1989 CRX Si - originally Y49
Mods/Condition:
EF8 SIR Front end and back bumper, clear oem/stanley front corners
replica j's racing front lip
advan rg 15x6.5 +34 with 195/50 dz102 (a few thousand miles on the tires)
rays/volk black steel lug nuts
original crx si wheels with 2 bad tires go with car
full set of OEM mudflaps go with car
I also have a brand new "HONDA" sticker and "Si" badge that go with the car.
H4H HID kit, not some H4's rammed in there.
engine:
B16A with YS1 trans (no LSD stamp, that I know of)
OBD1, PR3 ECU. not tuned to my knowledge
Sleeved wiring harness, semi tucked.
factory IM and exhaust manifold, has an unknown catback, sounds good but rattles at high rpm
hasport mounts, shift linkage seems to be OEM
Runs great, cant see smoke while driving but does give an oil smell on decel and driving hard.
suspension:
innovative traction bar, driven twice since install. not the super latest version, have original brace to go with car
function form coilovers (300 miles maybe, have a blown set of skunk2 pro-c coils to go with car)
skunk2 front upper control arms
skunk2 rear camber arm
asr rear subframe brace
interior:
recently put new speakers in doors, rears need to be replaced.
will come with a knockoff mugen shift knob
CONS:
- Car is wrapped 3M sunflower yellow, its my 2nd wrap so not the best. Roof has seams where there shouldnt be as I was using scraps at the end. I planned to bring the wrap down the bumpers like the OEM paint but I ran out.
- Front end is in primer underneath and obviously the rear bumper is black.
- Has some rust in normal spots, driver quarter under glass, bubbling on sunroof, fuel door etc. Worst is under the quarter glass, there's two holes that were covered with some body work taped and wrapped over. I have attached a photo showing one of them
- Car needs new seats or recovering as shown
- Missing passenger floor mat
- Missing spare tire, jack, tools, cardboard but carpet is back there
- Driver kick panel is broken, missing passenger floor mat and climate control is cracked
- Missing a/c from firewall forward, no lines, condensor, engine bracket or anything.
-Cracked windshield about halfway across, doesn't bother me much while driving and isn't spidered out.
- sunroof does not work
- Tint is purple and bubbling, its really old.
https://i.imgur.com/LEOpTm8l.jpg
https://i.imgur.com/dKTcXUOl.jpg
Album with more pics: https://imgur.com/a/O1mLHhk