GKtech V2 Knuckles

[battery1882]

Just found out they don't work with big brakes.. I think z32 works.. i have 14in rotors.

Sold!

[d9m13n]

Why dont these work with big brakes? I have an ap racing front kit and was hoping to get gktech grip knuckles, but this is making me think I cant

[battery1882]

Why dont these work with big brakes? I have an ap racing front kit and was hoping to get gktech grip knuckles, but this is making me think I cant

I read that the brake mounts are located below stock location which makes rotors hit the bj. I think they fixed it for v3. grip ones are v3 so they should work


Edit : correction, "calipers would hit the bj" is what I read.

[tuzzio]

Why dont these work with big brakes? I have an ap racing front kit and was hoping to get gktech grip knuckles, but this is making me think I cant

My grip knuckles work with my Z32 jams.

If you still have my number, text me. I'll sell ya mine.

[Mr.slipngrip]

They do work with light modification. I have them on my s13 with ctsv 4 piston calipers.

[sr vegas 240]

Why dont these work with big brakes? I have an ap racing front kit and was hoping to get gktech grip knuckles, but this is making me think I cant

v3 are the grip knuckles not v2

[d9m13n]

v3 are the grip knuckles not v2



I was just curious if they changed the design for the v3 to accommodate BBK, fully aware they are different revisions

[Mr.slipngrip]

Well hey I just notice I have the V3 knuckles on my S13 sorry for the bad info lol.

[sr vegas 240]

I was just curious if they changed the design for the v3 to accommodate BBK, fully aware they are different revisions

That not sure I have z32 and ton of room I'd check their site for that

[battery1882]

That not sure I have z32 and ton of room I'd check their site for that

z32 will mount fine.

[battery1882]

price drop to $298

Trades : aluminum driveshaft, carbon hood

[djtoonjr]

Honestly all depends on what kind of bracket ur using for which calipers. i can tell you right off the back the kits from CTSVswap.com for both 4 pistons and 6 piston wont work with these knuckles. Although ECP brackets and 17z porsche calipers, and a full ROTORA BBK will work with these knuckles.

[battery1882]

Honestly all depends on what kind of bracket ur using for which calipers. i can tell you right off the back the kits from CTSVswap.com for both 4 pistons and 6 piston wont work with these knuckles. Although ECP brackets and 17z porsche calipers, and a full ROTORA BBK will work with these knuckles.

Correct! I happen to have 14" (355mm) rotors which are not common with our cars, i want to avoid building all new bracket for my setup. Plus my car is not super low in front to benefit from rc correction. so i would rather invest on rear knuckles to eliminate some old bushings.

[battery1882]

bump still have this!

[mr.nismo.]

Honestly all depends on what kind of bracket ur using for which calipers. i can tell you right off the back the kits from CTSVswap.com for both 4 pistons and 6 piston wont work with these knuckles. Although ECP brackets and 17z porsche calipers, and a full ROTORA BBK will work with these knuckles.4 piston will work. I PM'd back and forth with gk and ctsv bake swap to get a solution.

Sent from my SM-G955U using Tapatalk

[battery1882]

Let's get this sold!!

[afishysilvia]

Do these fit s14?

[battery1882]

Do these fit s14?

Yes i guess i forgot to mention that..these are for s14

[afishysilvia]

What rear knuckles you looking for oem? Or aftermarket? Interested

[battery1882]

What rear knuckles you looking for oem? Or aftermarket? Interested

aftermarket. preferably latest gktech