comablack783
10-07-2018, 10:58 PM
These are 3 piece wheels from Hart, model is 759. Very rare and hard to find info on them but I believe they were outsourced to OZ as they appear to use OZ 40 bolt hardware (do your own research!). Plan was to sandwich mount them but never got around to it and now I no longer have the s13 they were slated for.
previous owner had them on an IS300, centerbore is 59.6mm, lug pattern is 5x114.3. One wheel has a slight bend in the lip.
Price is $1100 obo. would prefer to sell locally in tampa FL but willing to ship at buyers expense.
current configuration:
Fronts 18x9 +31mm
https://imgur.com/YhviVN5.jpg
This front wheel has a slight bend in the lip.
https://imgur.com/LC2DwLC.jpg
Rears 18x11 +47mm
https://imgur.com/TrF27jp.jpg
https://imgur.com/JmcjZcJ.jpg
The faces/centers are different thicknesses 44mm / 65mm
https://imgur.com/NEzZfHA.jpg
playing around to see what the faces would look like behind the lips..
fronts
https://imgur.com/tvOXvw0.jpg
rears
https://imgur.com/fWPyH1n.jpg
NOT MY SET: but potential for sandwich mount is there, would require milling of the centers to allow the lip to seat correctly.
https://imgur.com/0CF7RUc.jpg
previous owner had them on an IS300, centerbore is 59.6mm, lug pattern is 5x114.3. One wheel has a slight bend in the lip.
Price is $1100 obo. would prefer to sell locally in tampa FL but willing to ship at buyers expense.
current configuration:
Fronts 18x9 +31mm
https://imgur.com/YhviVN5.jpg
This front wheel has a slight bend in the lip.
https://imgur.com/LC2DwLC.jpg
Rears 18x11 +47mm
https://imgur.com/TrF27jp.jpg
https://imgur.com/JmcjZcJ.jpg
The faces/centers are different thicknesses 44mm / 65mm
https://imgur.com/NEzZfHA.jpg
playing around to see what the faces would look like behind the lips..
fronts
https://imgur.com/tvOXvw0.jpg
rears
https://imgur.com/fWPyH1n.jpg
NOT MY SET: but potential for sandwich mount is there, would require milling of the centers to allow the lip to seat correctly.
https://imgur.com/0CF7RUc.jpg