PDA

View Full Version : CA LS1 RX8 with AC, Feal 441+, Everything works


odi
09-06-2018, 10:40 AM
PRICE DROP TO $10,500 !!!

2004 Mazda RX8
Clean title
125K on chassis
LS1 engine from 2002 Camaro: 243 heads, mild cam, tune without check engine light, Hooker exhaust manifolds, magnaflow mufflers.
TR6060 6 Speed manual trans
AC works!
Heater works
All factory gauges work
Has RX8 and GM OBD2 port (both work)
4.40 final drive
18x9/18x10 wheels
Feal 441+ coilovers
Yellow wrap, original color is red
Runs great, sounds great, and turns heads!

https://inlandempire.craigslist.org/cto/d/ls1-swapped-rx8-fully/6670436505.html

$10,500 FIRM.

https://post.craigslist.org/imagepreview/00g0g_fhVpILkmjgd_300x300.jpg

https://post.craigslist.org/imagepreview/00Q0Q_4fwjMltQWVn_300x300.jpg

https://post.craigslist.org/imagepreview/00303_eqnkZOs5D7L_300x300.jpg

https://post.craigslist.org/imagepreview/00s0s_aqI4cpUksoi_300x300.jpg

https://post.craigslist.org/imagepreview/00n0n_cRM2C7PTsc9_300x300.jpg

https://post.craigslist.org/imagepreview/00Y0Y_g3fJ4vno40b_300x300.jpg

simmode1
09-06-2018, 10:54 AM
:eek2: Want. I wish I was in the market right now. GLWS.

RalliartRsX
09-06-2018, 10:58 AM
The fact that you got all the gauges to work makes me want this! Did you retain ABS?? From what I understand that is the BIGGEST issue with swapping these.

Good deal here. What did you do to get all the gauges to work?? Also you state it needs to be finished; what exactly does this project need to be "finished"??

odi
09-06-2018, 11:31 AM
The fact that you got all the gauges to work makes me want this! Did you retain ABS?? From what I understand that is the BIGGEST issue with swapping these.

Good deal here. What did you do to get all the gauges to work?? Also you state it needs to be finished; what exactly does this project need to be "finished"??

The previous owner geeked out and got everything to work, it has both ecu's I believe. For the tach signal there is a additional reluctor wheel on the front of harmonic balancer with a signal pick up. You can hook up to the GM and Mazda ECU via 2 seperate OBD2 ports. The GM ecu has been programmed for the swap properly (no check engine light present).
I will double check the ABS functionality. Also has original electric steering.

The car is finished, you may have read it wrong in the Craigslist post.

RalliartRsX
09-06-2018, 11:38 AM
Yep, read it wrong!

Thanks for this. Very tempting!

And in regards to the reluctor wheel; I think that can also be used for the ABS signal.

This is a great deal. I would dump my VET project for this.

afishysilvia
09-06-2018, 12:02 PM
Had no idea Odi was on here!!!! dope...

Seen this car on his IG stories from time to time, looks great!

GWLS and good luck in Texas!

GIMJ
09-06-2018, 01:57 PM
Interested in a lifted Avalanche with 76K miles?

wheelman167
09-07-2018, 10:16 PM
Bump for odi bakchis

odi
09-08-2018, 03:45 PM
Interested in a lifted Avalanche with 76K miles?

PM sent.

mogli9000
09-10-2018, 02:56 PM
trade for 500hp evo x plus cash on your end?

afishysilvia
09-10-2018, 03:01 PM
trade for 500hp evo x plus cash on your end?

Lmao stop buying cars :keke:

afishysilvia
09-10-2018, 04:50 PM
Thanks for the neg rep you low life hoebag whoever you are, bump for Odi.

odi
09-18-2018, 08:36 PM
Sale was pending but did not happen, so re listing!

odi
09-21-2018, 07:13 PM
PRICE DROP DOWN TO $10,500.

Ready to sell this weekend.

92SEric240sx
09-22-2018, 07:35 PM
Nice car- very good price

Atrocy
09-29-2018, 10:40 PM
Trade for 08 Mazdaspeed3? 108k miles FBO

odi
10-01-2018, 10:46 AM
Thank you everyone for the trade offers, all messages replied.

odi
10-05-2018, 11:05 AM
Friday bump. Available this weekend to show the car.

LetsGetLifted_180sx
10-06-2018, 12:39 AM
Tell justin to put on my tab lol and I’ll take it this weekend

idae209
10-14-2018, 09:36 PM
still available?

Spitfire8o5
11-28-2018, 11:25 PM
Link doesn’t work. Additional pictures?

sleek6mt
11-30-2018, 05:40 PM
still available?



It’s been sold