ada180sx
08-09-2018, 10:58 AM
I recently upgraded to a standalone ECU (Megasquirt MSPNP2). So, I am selling all my spare stuff. I am pretty firm on prices. I will ignore or publicly mock low balls. So, if you don't hear back soon...
See Images Here: https://imgur.com/gallery/hc5KarG
Boost Gauge and MAFS screens can be seen here: https://imgur.com/gallery/hEn1DBr
ITEM 1: Apexi Super Air Intake Filter for Z32 MAFS - $50
Apexi Filter is Genuine and for all practical purposes new. I picked this up at an Up Garage in Kagoshima. Used it for one dry day of trouble shooting.
ITEM 2: N62 MAFS from Z32 300zx - $60
This was my spare so It was used for a couple laps when I thought I had a MAFS issue. Turned out to be a leaky BOV. I also have a new harness plug that I will include (Not Pictured)
ITEM 3: Greddy Profec B Boost Controller $110
This unit worked great. However, my new standalone has closed loop boost control. So, I no longer require this one. Its also worth noting that this was my backup unit so it didn’t get much use. I did use it when I thought the other one wasn’t working. The problem this time turned out to be a perforated waste gate actuator diagram.
ITEM 4: RX-7 Injector Resistor box - $30
I used this to run low impedance injectors with above ECU. It currently has Bosch Style (EV1) Injector harness but I would recommend putting on some fresh ones. If you pay the full price, I can probably find some brand new ones in my garage
ITEM 5: Omori Meter 52mm Oil Pressure Gauge - $30
Whenever I am in Japan I have a “Bad” habit of spending way too much money at Up Garage. I have a particular penchant for old school stuff like this. However, as I am doing more events this year, I need to thin the heard and sell stuff I am unlikely to need in order to pay for event fees and tires. Anyway, I don’t have a way to test this with any real accuracy. However, it moves speedly with compressed air and always comes back to zero exactly zero. Comes with line shown in picture.
ITEM 6: Blitz 60mm Boost Gauge - SOLD
Same as above. Bought it in Japan but will likely not use it anytime in near future. So, its gotta go. I hooked it up to my car (in the engine bay) and it seems to work as expected on vacuum and boost (while revving). After taking pics with the illumination on, I am seriously considering keeping this...
Possible Trades: S13 6 bolt Axles, S13 OEM Dizzy, Steering Rack, 8K/6K swift springs, Big Angle Knuckles
I am not currently interested in other Trades
Thanks for looking,
Ada180sx
See Images Here: https://imgur.com/gallery/hc5KarG
Boost Gauge and MAFS screens can be seen here: https://imgur.com/gallery/hEn1DBr
ITEM 1: Apexi Super Air Intake Filter for Z32 MAFS - $50
Apexi Filter is Genuine and for all practical purposes new. I picked this up at an Up Garage in Kagoshima. Used it for one dry day of trouble shooting.
ITEM 2: N62 MAFS from Z32 300zx - $60
This was my spare so It was used for a couple laps when I thought I had a MAFS issue. Turned out to be a leaky BOV. I also have a new harness plug that I will include (Not Pictured)
ITEM 3: Greddy Profec B Boost Controller $110
This unit worked great. However, my new standalone has closed loop boost control. So, I no longer require this one. Its also worth noting that this was my backup unit so it didn’t get much use. I did use it when I thought the other one wasn’t working. The problem this time turned out to be a perforated waste gate actuator diagram.
ITEM 4: RX-7 Injector Resistor box - $30
I used this to run low impedance injectors with above ECU. It currently has Bosch Style (EV1) Injector harness but I would recommend putting on some fresh ones. If you pay the full price, I can probably find some brand new ones in my garage
ITEM 5: Omori Meter 52mm Oil Pressure Gauge - $30
Whenever I am in Japan I have a “Bad” habit of spending way too much money at Up Garage. I have a particular penchant for old school stuff like this. However, as I am doing more events this year, I need to thin the heard and sell stuff I am unlikely to need in order to pay for event fees and tires. Anyway, I don’t have a way to test this with any real accuracy. However, it moves speedly with compressed air and always comes back to zero exactly zero. Comes with line shown in picture.
ITEM 6: Blitz 60mm Boost Gauge - SOLD
Same as above. Bought it in Japan but will likely not use it anytime in near future. So, its gotta go. I hooked it up to my car (in the engine bay) and it seems to work as expected on vacuum and boost (while revving). After taking pics with the illumination on, I am seriously considering keeping this...
Possible Trades: S13 6 bolt Axles, S13 OEM Dizzy, Steering Rack, 8K/6K swift springs, Big Angle Knuckles
I am not currently interested in other Trades
Thanks for looking,
Ada180sx