S13 sr20 part out

[Buummp]

Parting out my sr20. going with a different power plant.

GT2871R garret turbo with SS oil feed/water/drain line. 5 track events on it. -$1,250

PBM HMIC with piping for t28 style turbo and s13 intake. have a bung welded to the intake pipe for my IAT sensor. can just plug it with an m10x1.25 bolt. -$300

HKS 264 intake 272 exhaust cams. Just got micropolished by a machine shop. - $250

S13 SR20 POWER FC D-JETRO with power commander and IAT and MAP sensor and subharness for MAP sensor. Will include 555cc injectors so you can slap this bad boy in and run it. - $1200

B&M short shifter - $200 obo

New Clutch. 5 events on it. Action 6 puck sprung with flywheel. $250

s13 transmission with SR20 bell housing - $250

1 piece steel driveshaft for s14 - $250

nismo engine mounts - $150 for both

S14 sr20 radiator with dual efans and shroud - $250

S13 SR20 engine. Has an s14 water neck to feed the turbo coolant. Engine was gone through by the previous owner. has an upgraded HG. can see it. no paperwork on the work, so take that into consideration. 110 compression in Cylinder 1. 155 in 2-4. not idea what went wrong. still runs. still drive on it. did another event with it like this. just time to go with a new powerplant. $600

Wiring Specialties PRO harness for S13 SR20 - $500


PM me for fastsat response.
Everything is OBO, so throw some offers.

Thanks !

[Smithwick]

Willing to separate the 555 injectors? What kind are they? Stock fuel rail, or aftermarket?

[Buummp]

Yeah I can separate them . They are the STI yellows. Stock fuel rail, with a tomei FPR

[Buummp]

Wednesday bump. Someone buy this stuff so I can get a new engine .

[Darkron]

U got the ac compressor for the sr?

[Buummp]

U got the ac compressor for the sr?

Nope .. fully caged and custom chassis harness. No AC /:

[Buummp]

Willing to separate the 555 injectors? What kind are they? Stock fuel rail, or aftermarket?

Yeah I can separate them . They are the STI yellows. Stock fuel rail, with a tomei FPR

[Mexichilipimp]

Can this PowerFC be used on a S13 Blacktop engine?

[Buummp]

Can this PowerFC be used on a S13 Blacktop engine?

I'm not sure. I'll find out and get back to you .

[.jAY]

fpr?


Sent from my iPhone using Tapatalk

[Buummp]

fpr?


Sent from my iPhone using Tapatalk

Currently pending sale with the Injectors and fuel rail.

[Buummp]

Can this PowerFC be used on a S13 Blacktop engine?


According to a friend who is a reliable source ...

S13 62/63 E4/5 is the same no pin out change
J4/5 is different. So it depends on which ECU you currently have , if it will plug right in or not.
Otherwise you have to change some pins I guess ?

[Buummp]

Friday bump! Someone throw me an offer

[nicoshiro79]

willing to part out s14 waterneck?

[Mexichilipimp]

According to a friend who is a reliable source ...

S13 62/63 E4/5 is the same no pin out change
J4/5 is different. So it depends on which ECU you currently have , if it will plug right in or not.
Otherwise you have to change some pins I guess ?


Im guessing your engine was a redtop. I'll check the code on my ECU and I'll get back to you.

Thank You

[Buummp]

Im guessing your engine was a redtop. I'll check the code on my ECU and I'll get back to you.

Thank You

Yes sir. It's a redtop.

No problem. Pm me anytime

[bzebern]

you selling a stock flywheel?

[Buummp]

you selling a stock flywheel?

With the clutch, yeh

[smoketherear]

sent ya a PM

[Sooax]

You still got that radiator?

[Buummp]

You still got that radiator?

Nah sorry. Buddy just said he needed it last night.

[Buummp]

All PM's replied to !

[sd180sx]

curious about the condition of the transmission. grinds, pop outs, bearings, etc.