brokeAs240sx
07-28-2018, 03:44 AM
Clearing out some stuff I no longer need/use. No shipping unless otherwise stated. Pickup in OC area around Costa Mesa/Irvine. Please PM to coordinate.
Trust/GReddy manual boost controller - $60 picked up, $70 shipped.
https://c1.staticflickr.com/1/748/33102625942_06c378e08e_z.jpg
https://c1.staticflickr.com/4/3911/33102624202_a8594f0f37_z.jpg
Defi Heads Up Boost Gauge - I hacked up the stock HUD display so that you can place it there as seen in pic. $200 picked up, $230 shipped.
https://c1.staticflickr.com/4/3707/33102626842_700c5ec8f3_z.jpg
Blitz Voice Guided Turbo Timer - $200 picked up, $220 shipped.
https://c1.staticflickr.com/4/3956/33258478235_82daed96e2_z.jpg
Here's a video of it when I had it installed:
4QS3kCWPHSA
GReddy Multi-Switching System (Fan Controller, can be used for other things, too) - comes as-is (I don't remember using the 2 other ports you see in the back). I used it as a fan controller. You'll need extra relays to make that happen, iirc. $200 picked up, $220 shipped
https://c1.staticflickr.com/1/570/33130009831_718cefbe23_z.jpg
https://c1.staticflickr.com/3/2916/32875534940_4fa4d03019_z.jpg
HKS Boost Controller / Electronic Valve Controller - $240 picked up, $270 shipped.
https://c1.staticflickr.com/4/3818/33130010261_18be6169d8_z.jpg
S13 Silvia bumper grills (comes w/ both, damaged one shown) - one has some damage, not very noticeable once mounted - $40 picked up, $55 shipped.
https://farm2.staticflickr.com/1535/25458057513_78f5b537be_z.jpg
S13 Under Dash (lower interior trim below steering wheel) climate control/radio remote mount/switch panel mount (it's black, just dusty in pics) - oem unit fiberglassed over so you can mount extra stuff - $100 picked up, $130 shipped.
https://farm2.staticflickr.com/1719/25994296821_0ea5f404f7_z.jpg
https://farm2.staticflickr.com/1706/25994296911_68a99fe751_z.jpg
RX7 (FC, I believe) Oil Cooler w/ -10 AN line fittings & some -10AN lines I used to run it. $50 picked up, $90 shipped
https://farm2.staticflickr.com/1627/24200981423_0deca09a78_z.jpg (https://flic.kr/p/CSymCp)
PT Cruiser Transmission/Power Steering Cooler. $35 picked up, $70 shipped
https://farm2.staticflickr.com/1483/24200981653_d34dcd744c_z.jpg (https://flic.kr/p/CSymGn)
SARD Oil Catch Can. SR/KA/Probably anything, really. Was installed on an S13 KA-T if that matters to you (was sold as an SR oil catch can). $70 picked, $90 shipped
https://farm2.staticflickr.com/1552/24801554896_3d563ee2c9_z.jpg (https://flic.kr/p/DMCscs)
Generic/ebay Carbon Fiber Wing.
Approximately 61" wide & between 8-9" in depth depending on portion measured.
Stands are ~7" in depth at the bottom, ~7" in height at front & ~8" in height at back. Wing itself is just under 4" high from bracket to top. Endplates are ~6" at tallest point.
Some light scratches from being used, but no cracks.
Asking $200 picked up. No shipping, sorry.
Since a lot of people ask, the trunk lock is available at $140 firm picked up, $155 paypalled shipped.
https://farm6.staticflickr.com/5697/22375099116_ffddb615d2_z.jpg
https://farm6.staticflickr.com/5721/22213373058_6a83b23ce2_z.jpg
https://farm6.staticflickr.com/5762/21779999703_1bf366c6a9_z.jpg
Clutch Pedal (push rod hole is a little worn, but works fine), adapter, 3/4" tilton master cylinder (aftermarket/ls1 setup): SOLD
Chase Bays brake delete plate, Brake pedal (additional hole drilled for better braking leverage), 1" dual/tandem wilwood master cylinder (better than the one it comes w/): $100 picked up, $140 shipped. You'll need your own lines/some fittings. Doesn't come w/ proportioning valve or lines.
wilwood brake proportioning valve & short lines: SOLD
Accelerator pedal: $30 picked up, $50 shipped.
https://farm2.staticflickr.com/1509/25416716094_0fe3d498ee_z.jpg
https://farm2.staticflickr.com/1472/26021454995_53e7ac8662_z.jpg
https://farm2.staticflickr.com/1530/26021455175_0f2c862cdd_z.jpg
Dual rear caliper setup uses off-the-shelf Wilwood parts to complete (not included, will end up being around 1200-1400 of wilwood parts all said and done depending on what deals you find). I will provide parts list to order to whoever buys the kit; this kit utilizes 4 piston wilwood calipers & 2 piece rotor. You'll need to be 5 lug in order to use the off-the-shelf rotor hat. I'm selling because I'm running 15" rims & it won't clear it. Asking $130 picked up, $150 shipped.
https://farm8.staticflickr.com/7183/26910905382_566b80aa4b_z.jpg
Trust/GReddy manual boost controller - $60 picked up, $70 shipped.
https://c1.staticflickr.com/1/748/33102625942_06c378e08e_z.jpg
https://c1.staticflickr.com/4/3911/33102624202_a8594f0f37_z.jpg
Defi Heads Up Boost Gauge - I hacked up the stock HUD display so that you can place it there as seen in pic. $200 picked up, $230 shipped.
https://c1.staticflickr.com/4/3707/33102626842_700c5ec8f3_z.jpg
Blitz Voice Guided Turbo Timer - $200 picked up, $220 shipped.
https://c1.staticflickr.com/4/3956/33258478235_82daed96e2_z.jpg
Here's a video of it when I had it installed:
4QS3kCWPHSA
GReddy Multi-Switching System (Fan Controller, can be used for other things, too) - comes as-is (I don't remember using the 2 other ports you see in the back). I used it as a fan controller. You'll need extra relays to make that happen, iirc. $200 picked up, $220 shipped
https://c1.staticflickr.com/1/570/33130009831_718cefbe23_z.jpg
https://c1.staticflickr.com/3/2916/32875534940_4fa4d03019_z.jpg
HKS Boost Controller / Electronic Valve Controller - $240 picked up, $270 shipped.
https://c1.staticflickr.com/4/3818/33130010261_18be6169d8_z.jpg
S13 Silvia bumper grills (comes w/ both, damaged one shown) - one has some damage, not very noticeable once mounted - $40 picked up, $55 shipped.
https://farm2.staticflickr.com/1535/25458057513_78f5b537be_z.jpg
S13 Under Dash (lower interior trim below steering wheel) climate control/radio remote mount/switch panel mount (it's black, just dusty in pics) - oem unit fiberglassed over so you can mount extra stuff - $100 picked up, $130 shipped.
https://farm2.staticflickr.com/1719/25994296821_0ea5f404f7_z.jpg
https://farm2.staticflickr.com/1706/25994296911_68a99fe751_z.jpg
RX7 (FC, I believe) Oil Cooler w/ -10 AN line fittings & some -10AN lines I used to run it. $50 picked up, $90 shipped
https://farm2.staticflickr.com/1627/24200981423_0deca09a78_z.jpg (https://flic.kr/p/CSymCp)
PT Cruiser Transmission/Power Steering Cooler. $35 picked up, $70 shipped
https://farm2.staticflickr.com/1483/24200981653_d34dcd744c_z.jpg (https://flic.kr/p/CSymGn)
SARD Oil Catch Can. SR/KA/Probably anything, really. Was installed on an S13 KA-T if that matters to you (was sold as an SR oil catch can). $70 picked, $90 shipped
https://farm2.staticflickr.com/1552/24801554896_3d563ee2c9_z.jpg (https://flic.kr/p/DMCscs)
Generic/ebay Carbon Fiber Wing.
Approximately 61" wide & between 8-9" in depth depending on portion measured.
Stands are ~7" in depth at the bottom, ~7" in height at front & ~8" in height at back. Wing itself is just under 4" high from bracket to top. Endplates are ~6" at tallest point.
Some light scratches from being used, but no cracks.
Asking $200 picked up. No shipping, sorry.
Since a lot of people ask, the trunk lock is available at $140 firm picked up, $155 paypalled shipped.
https://farm6.staticflickr.com/5697/22375099116_ffddb615d2_z.jpg
https://farm6.staticflickr.com/5721/22213373058_6a83b23ce2_z.jpg
https://farm6.staticflickr.com/5762/21779999703_1bf366c6a9_z.jpg
Clutch Pedal (push rod hole is a little worn, but works fine), adapter, 3/4" tilton master cylinder (aftermarket/ls1 setup): SOLD
Chase Bays brake delete plate, Brake pedal (additional hole drilled for better braking leverage), 1" dual/tandem wilwood master cylinder (better than the one it comes w/): $100 picked up, $140 shipped. You'll need your own lines/some fittings. Doesn't come w/ proportioning valve or lines.
wilwood brake proportioning valve & short lines: SOLD
Accelerator pedal: $30 picked up, $50 shipped.
https://farm2.staticflickr.com/1509/25416716094_0fe3d498ee_z.jpg
https://farm2.staticflickr.com/1472/26021454995_53e7ac8662_z.jpg
https://farm2.staticflickr.com/1530/26021455175_0f2c862cdd_z.jpg
Dual rear caliper setup uses off-the-shelf Wilwood parts to complete (not included, will end up being around 1200-1400 of wilwood parts all said and done depending on what deals you find). I will provide parts list to order to whoever buys the kit; this kit utilizes 4 piston wilwood calipers & 2 piece rotor. You'll need to be 5 lug in order to use the off-the-shelf rotor hat. I'm selling because I'm running 15" rims & it won't clear it. Asking $130 picked up, $150 shipped.
https://farm8.staticflickr.com/7183/26910905382_566b80aa4b_z.jpg