(Pic heavy) Saving a 200SX S13

[Jyttah]

Hi. Im pretty new here, but i want to share my history and my build with you.

About a year ago, i bought a Nissan 200SX S13 that was taken totally apart. previously ive had 3 other S13s, so i saw this as a great project.

As it was taken apart, i could see all the rust it had and it made it easier for me to actually make the decision to buy it or not.
My mechanic also accepted the purchase as he was the one to fix all the rust and rebuild the engine.

https://billeder.bazoom.dk/biler/album/466/xl/2325671/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/466/xl/2325673/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/466/xl/2325676/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/466/xl/2325685/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/466/xl/2325702/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/466/xl/2325705/projektbilen-nissan-200sx-s13-ca18det.jpg


As you can see, it requires a lot of love. But luckely, im going all in on this build. Ill do as much as i can myself, and get help from my friends.

Anyway. First thing i did was to remove the subframe so i could get it cleaned up and installed new bushings.

https://billeder.bazoom.dk/biler/album/466/xl/2325746/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/466/xl/2325751/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/466/xl/2329249/projektbilen-nissan-200sx-s13-ca18det.jpg
It had a lot of surfacerust. So i handed it over to a local company to get it cleaned and painted.

I was lucky that my boss agreed to have the car at my workplace for some time (I work as a warehouse supervisor, so i was able to find an unused corner where i could park the car)

https://billeder.bazoom.dk/biler/album/466/xl/2325759/projektbilen-nissan-200sx-s13-ca18det.jpg


As a lot of other people, i wanted to go for the TypeX bodykit, so i ordered a komplete set from JDMBodyshop in poland.
https://billeder.bazoom.dk/biler/album/466/xl/2325768/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/466/xl/2329215/projektbilen-nissan-200sx-s13-ca18det.jpg

I also bought a set of Japan Racing JR7 17x8 ET35 as they look fantastic with the TypeX kit.
https://billeder.bazoom.dk/biler/album/466/xl/2329219/projektbilen-nissan-200sx-s13-ca18det.jpg


After a lot of looking around on the car i found more rust. so the best thing to do would be to cut it out and remove it. This means my front fenders have to go and the same with the rear ones.
This gave me and excuse to buy wider fenders.
I ended up with 30mm in the front and 50mm in the back
https://billeder.bazoom.dk/biler/album/467/xl/2331658/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/467/xl/2331660/projektbilen-nissan-200sx-s13-ca18det.jpg

The subframe and arms came back from the local shop and have been blasted and powdercoated. I wanted to go for a bronze/copper color, but they didnt have any i liked. So i went for a BMW grey color with a bit of flakes in the clear coat.
https://billeder.bazoom.dk/biler/album/467/xl/2333646/projektbilen-nissan-200sx-s13-ca18det.jpg
Its hard to catch with a camera, but here you get the idea:
https://billeder.bazoom.dk/biler/album/467/xl/2333648/projektbilen-nissan-200sx-s13-ca18det.jpg

Poly-bushings installed and i could put it all back together
https://billeder.bazoom.dk/biler/album/467/xl/2333650/projektbilen-nissan-200sx-s13-ca18det.jpg

It looks so wrong that the whole car looks shity, but the subframe looks like new. This might be the new ratlook :P https://billeder.bazoom.dk/biler/album/467/xl/2334702/projektbilen-nissan-200sx-s13-ca18det.jpg

[Jyttah]

I totally forgot i had this build thread. So lets make an update ;)

As im going for a TypeX build. The only right thing to do is also to order the Kouki rear lights. Found these brand new in the states, so i made the purchase.
https://billeder.bazoom.dk/biler/album/466/xl/2325755/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/466/xl/2325758/projektbilen-nissan-200sx-s13-ca18det.jpg

I also got a good deal on a Nardi steering wheel.
https://billeder.bazoom.dk/biler/album/467/xl/2333925/projektbilen-nissan-200sx-s13-ca18det.jpg

And because of the steering wheel, i would like to have nice and precise steering, so i went for a solid steering bushing.
https://billeder.bazoom.dk/biler/album/467/xl/2334699/projektbilen-nissan-200sx-s13-ca18det.jpg

When doing all of the suspensionparts, i wanted to have it all in the same simple colors. The subframe and arms in grey and the bushings in red. So i ordered a polyurethane bushing for the gearbox in red. But when it came, it was orange. Guess how dissapointed i was!
https://billeder.bazoom.dk/biler/album/467/xl/2334705/projektbilen-nissan-200sx-s13-ca18det.jpg

But at least the front subframe looks good
https://billeder.bazoom.dk/biler/album/467/xl/2334703/projektbilen-nissan-200sx-s13-ca18det.jpg


Anyway. The day i had to remove the car from my work was getting close. So i had to install as much in the car as possible. i took this opportunity to see if all the interiorpieces was included in my purchase.
https://billeder.bazoom.dk/biler/album/467/xl/2334930/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/467/xl/2334924/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/467/xl/2334925/projektbilen-nissan-200sx-s13-ca18det.jpg
Looks pretty complete to me :D

Anyway. a few days before i had to move the car, a good friend of mine came by to take a few pictures.
https://billeder.bazoom.dk/biler/album/468/xl/2335195/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/468/xl/2335210/projektbilen-nissan-200sx-s13-ca18det.jpg

I was lucky that my mechanics had place for the car and all the parts. So we moved the car to his place, so he could start welding and fixing the engine.
https://billeder.bazoom.dk/biler/album/468/xl/2336456/projektbilen-nissan-200sx-s13-ca18det.jpg


all the smaller parts was loaded into a room with a bunch of shelves. This makes it so much easier to find what you need.
https://billeder.bazoom.dk/biler/album/468/xl/2337406/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/468/xl/2337408/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/468/xl/2337407/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/468/xl/2337409/projektbilen-nissan-200sx-s13-ca18det.jpg


Because of the widebody kit from JDMbodyshop in Poland, i had to go with spacers to move the wheels out. So i ordered a set of 50mm and a set of 30mm. This might have been the stupidest thing ever. because Mr Genius here went for 5lug and Z32 brakes.
So i had to sell the wheels, the reinforced brakehose and the spacers. Big loss for me. But thats life when you dont plan ahead :D

A few more boxed showed up.
https://billeder.bazoom.dk/biler/album/468/xl/2338937/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/468/xl/2338943/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/468/xl/2338940/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2341002/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2341495/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2341518/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2341584/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2344290/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2344292/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2344293/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2344314/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2344979/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2344980/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2344984/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2344987/projektbilen-nissan-200sx-s13-ca18det.jpg


My friend started to look into the rust there was on the car and at the same time cut out the original fenders to make space for bigger wheels under the wide body.
https://billeder.bazoom.dk/biler/album/469/xl/2340115/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2340114/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2340964/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2340965/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2340969/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2340970/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2340972/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2341509/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2344318/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2344319/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2344320/projektbilen-nissan-200sx-s13-ca18det.jpg


Testfitted the overfenders. And DAMN! Its gonna be wide!
https://billeder.bazoom.dk/biler/album/469/xl/2340973/projektbilen-nissan-200sx-s13-ca18det.jpg

Also testfitted the 17x8 ET35 with 50mm spacers in the back. This is the result:
https://billeder.bazoom.dk/biler/album/469/xl/2340980/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/469/xl/2340987/projektbilen-nissan-200sx-s13-ca18det.jpg

[Jyttah]

I ran out of space. So heres the last few pictures i have for now.

My works neighbour makes airtools. So after i talked a bit with the CEO (who also loves cars) he came over with a small box filled with goodies. So now i can sodablast stuff. Very cool!
https://billeder.bazoom.dk/biler/album/469/xl/2344333/projektbilen-nissan-200sx-s13-ca18det.jpg

This is my first attempt to sodablast a set of Z32 front calipers for 30mm discs.
https://billeder.bazoom.dk/biler/album/469/xl/2344300/projektbilen-nissan-200sx-s13-ca18det.jpg


Some people tease me about the gearknob i want to use on the car. I dont know why though :D
https://billeder.bazoom.dk/biler/album/469/xl/2340963/projektbilen-nissan-200sx-s13-ca18det.jpg

So. i also wanted something else than the Kouki spoiler. So i ordered a roof spoiler and a 326 Power Wing from JDMbodyshop where the rest of the fibreglass is from. Unfortunally the 326 spoiler was in so bad condition when it arrived, i had to scrap it. The same with the overfenders as the fitment was so bad we could not get it to fit properly. So i found a set of OriginLabo 40mm for the front and 50mm for the back.
https://billeder.bazoom.dk/biler/album/469/xl/2344338/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2345557/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2345559/projektbilen-nissan-200sx-s13-ca18det.jpg


Last pic for now.
When doing a total rebuild of everything of the car, the only right thing to do is also to reset the odometer. So thats exactly what i did :D
https://billeder.bazoom.dk/biler/album/469/xl/2344983/projektbilen-nissan-200sx-s13-ca18det.jpg

[Jyttah]

Double post :/

[Sailor]

Love the underbody color, great job so far.

That odometer reset tho :keke:

[Jyttah]

Love the underbody color, great job so far.

That odometer reset tho :keke:

Thanks. The project started over a year ago, so right now im just uploading the short story of it all so i can get up till now ;)

[Jyttah]

I have more pictures ready.

These pictures was taken over det last 2 months, so we are almost up to speed.

I wanted the car to be as low as possible and still be able to drive around in my country. So coilovers and aircups is the perfect solution to drive low, and being able to raise the car over speedbumps if needed.

https://billeder.bazoom.dk/biler/album/470/xl/2347091/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347095/projektbilen-nissan-200sx-s13-ca18det.jpg

And by being low, the stock suspension adjustmenst are not enough. So i went all in and ordered a complete kit of adjustable arms from Driftworks.com
https://billeder.bazoom.dk/biler/album/470/xl/2347094/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347096/projektbilen-nissan-200sx-s13-ca18det.jpg
Absolutely lovely quality!

When i bought the car, i also got a box of brand new HSD coilovers. So why not put these to use?
https://billeder.bazoom.dk/biler/album/470/xl/2347099/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347102/projektbilen-nissan-200sx-s13-ca18det.jpg

With a balck Mishimoto intercooler and oil cooler, it was pretty obvious that i also needed black silicone hoses for the intercooler piping
https://billeder.bazoom.dk/biler/album/470/xl/2347101/projektbilen-nissan-200sx-s13-ca18det.jpg


A few weeks ago i had to pick up my painter so we could work on the car. I asked him if i should being some tools. Only thing he replied: If you are coming before 11, bring beer. So this was the only right way to bring him beer :P
https://billeder.bazoom.dk/biler/album/470/xl/2347103/projektbilen-nissan-200sx-s13-ca18det.jpg
Its Carlsberg red. If you can find it anywhere, try it! Its fantastic! (Yes, im from Denmark and Carlsberg is danish)

Anyway. My friend and i started to remove all of the sound deadening. What a fucking nightmare.
https://billeder.bazoom.dk/biler/album/470/xl/2347104/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347106/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347108/projektbilen-nissan-200sx-s13-ca18det.jpg


As i mentioned before, i had to scrap all of the widebody and ordered a set of originLabo.
Fitment looks great. I've just mounted it loose for the sake of the pictures
https://billeder.bazoom.dk/biler/album/470/xl/2347109/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347110/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347112/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347113/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347115/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347116/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347126/projektbilen-nissan-200sx-s13-ca18det.jpg


As i want the car to be a summer-car, i had to find the perfect exhaust-solution. I had a Japspeed V2 catback system laying around, but ive always hated the huge 4.5"muffler. Especially when the car would be really low, it would get cought on everything. So i had to find a solution. I wanted to find a dual exhaust just like the original one, but with better flow.

So after searching all over the internetz, i found a danish shop selling Xforce Varex. So ofc i ordered one right away. The company emailed me stating the delivery time would be 12 weeks! So i had to wait. But boy, it was worth it!

If you look closely, you can see my slave holding the muffler :D :D :D
https://billeder.bazoom.dk/biler/album/470/xl/2347132/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347120/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347124/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347125/projektbilen-nissan-200sx-s13-ca18det.jpg

Also received a spark plug cover for the CA18DET engine.
https://billeder.bazoom.dk/biler/album/470/xl/2347128/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347130/projektbilen-nissan-200sx-s13-ca18det.jpg


One thing that i forgot to mention earlier that i got all my paint sponsored. I just had to tell Autolakhandel.dk (http://Autolakhandel.dk) what paint i needed, and they'll provide it for me.
So after months of thought, i finally ordered the 3 lucky colors. One of them is just black for the enginebay and the interior. The other 2 i won't say just yet. But one is an original Nissan color, the other color is a Toyota color :P
https://billeder.bazoom.dk/biler/album/470/xl/2347127/projektbilen-nissan-200sx-s13-ca18det.jpg

[deolio]

why such narrow, high offset wheels? especially when you have overs

[Jyttah]

why such narrow, high offset wheels? especially when you have overs

I bought the wheels as the first thing after buying the car. So when i wanted to go for overfenders, i got spacers. Then i wanted to go for Z32 brakes, so i had to go for 5lug also. And then the wheels and spacers was sold. So right now i have a set of 18x8 ET33 wheels. But im going for a set of 18x10.5 as soon as i know the perfect offset.

[codyzsilvia]

Hey I saw you post that carbon cover in the CA18DET page on Facebook.... excited to see this build!

[Jyttah]

Hey I saw you post that carbon cover in the CA18DET page on Facebook.... excited to see this build!

Thanks. Im trying to keep both my facebookpage and instagram ;)
You are more then welcome to follow them :D

http://facebook.com/Order42 and https://www.instagram.com/gogo_gojira/

[tuzzio]

As much as i'm a stock body guy, awesome build. Attention to detail is there for sure.

[Sailor]

So after searching all over the internetz, i found a danish shop selling Xforce Varex. So ofc i ordered one right away. The company emailed me stating the delivery time would be 12 weeks! So i had to wait. But boy, it was worth it!

Awesome looking exhaust, love the extra stealthiness of OEM+ looking muffler and tips (not to mention the electronic valve control :naughty:). 12 weeks is quite a long time to wait though! Builds coming along nicely, keep up the good work Jyttah

[The_Element_911]

Keep up the good work!! I can't wait longer for my S13 to arrive :2f2f:

[Jyttah]

Thanks for the kind words. But i cannot take the credit. Most of this work is done by my friends. Its really good to have friends with skills like this. I only spend money and help where i can ;)

Anyway, as this car wasnt born with A/C, i had to install it. This meant i have to find all the pieces. Not easy! hopefully im getting the condenser and filter this weekend!

https://billeder.bazoom.dk/biler/album/470/xl/2347335/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347336/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347337/projektbilen-nissan-200sx-s13-ca18det.jpg
I would love to get the digital climate control from a late model 180SX, but its really hard to find everything i need without paying an arm and 3 legs.

My friend told me last week that him and another buddy will do some metal work on the car. So had to come by and see how its going.
I picked up the carbon coil cover so i could see how it looked.
https://billeder.bazoom.dk/biler/album/470/xl/2347338/projektbilen-nissan-200sx-s13-ca18det.jpg
I approved :D

My friend tackled the front right side as its previously been hit, so the whole headlight bracket was bend. I ordered a new straight from Nissan here in Denmark so it could be replaced. But the previous owner did some "rustwork" where the battery used to be. This was not good enough for us, so it had to be redone.

https://billeder.bazoom.dk/biler/album/470/xl/2347339/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347340/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347346/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347348/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347341/projektbilen-nissan-200sx-s13-ca18det.jpg

End result of this peace looks something like this: It still needs the last finishing touches, but a LOT nicer than before.
https://billeder.bazoom.dk/biler/album/470/xl/2347349/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347352/projektbilen-nissan-200sx-s13-ca18det.jpg


The 2 guys do a tag team on the car. One is welding and the other is cutting out rust and making patches. Thats how you do progress :D
https://billeder.bazoom.dk/biler/album/470/xl/2347344/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347353/projektbilen-nissan-200sx-s13-ca18det.jpg

Inside the car there was more rust than expected. But im so happy it was found now, and not after it has been painted, installed sound deadening and undercoated it all.
https://billeder.bazoom.dk/biler/album/470/xl/2347350/projektbilen-nissan-200sx-s13-ca18det.jpg


But what looked like a small hole, suddenly grew a bit bigger :P
https://billeder.bazoom.dk/biler/album/470/xl/2347354/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2347355/projektbilen-nissan-200sx-s13-ca18det.jpg

Thats it for now. Ill return when theres something news, like a complete Z32 brake swap or a painted enginebay ;)

Take care and follow Order42 on Facebook ;)

[Jyttah]

Time flies and im to busy to actually do much work on the S13.
But im happy that my friend is slowly welding everything.
https://billeder.bazoom.dk/biler/album/470/xl/2348399/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2348408/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2348402/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2348401/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2348403/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2348400/projektbilen-nissan-200sx-s13-ca18det.jpg


On top of that, i've almost collected everything for the AC.
https://billeder.bazoom.dk/biler/album/470/xl/2348394/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2348395/projektbilen-nissan-200sx-s13-ca18det.jpg


And because of the Z32 front brakes, i had to go Z32 in the rear also. So ordered a pair of rear z32 calipers.
But as i still wanted a proper feel in the brakepedal, I ended up with a BM50 brake master cylinder.

https://billeder.bazoom.dk/biler/album/470/xl/2348393/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2348397/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2348411/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2348410/projektbilen-nissan-200sx-s13-ca18det.jpg

In on the lookout for the perfect wheels. Its a bit problematic as im running Aircups. And i dont want to use spacers if possible.
Here you can see a 18X8,5" ET33 wheel. And its gonna hit the aircup when its under load. Its a pretty big problem if that happens ;)
https://billeder.bazoom.dk/biler/album/470/xl/2348409/projektbilen-nissan-200sx-s13-ca18det.jpg


I was bored, so i ordered a GT2860 turbo from a local dealer. But i figured out that a 2871 was a better choice for me, so i returned it.
https://billeder.bazoom.dk/biler/album/470/xl/2348405/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2348406/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2348407/projektbilen-nissan-200sx-s13-ca18det.jpg

Thats if for now. But im planning a work-weekend with my painter and my mechanic. So hopefully we can start putting some paint down in the enginebay.
For more info, follow Order42 (https://www.facebook.com/Order42/)on Facebook (https://www.facebook.com/Order42/)

[deolio]

as far as finding wheels that fit goes, maybe check out this thread http://zilvia.net/f/showthread.php?t=129865

something like a 17x9 -5 up front and 18x10.5 +12 in the rear should fit great.

[Vwongjj]

Beautiful work done so far!! Definitely following this thread as im gonna do the same soon!

Btw what gearbox are you planning to run on your CA?

[Jyttah]

as far as finding wheels that fit goes, maybe check out this thread http://zilvia.net/f/showthread.php?t=129865

something like a 17x9 -5 up front and 18x10.5 +12 in the rear should fit great.


Wow. Thats a huge thread. But i have some spacers in different sizes, so i can meassure it out myself. Them im sure its 100% correct. But im hoping to get 10.5 or 11.5" in the back and hopefully 9.5 in the front - and still have space for the aircups.



Beautiful work done so far!! Definitely following this thread as im gonna do the same soon!

Btw what gearbox are you planning to run on your CA?

Im just gonna run the original gearbox. As im not expecting to make high horsepower, or gonna race it. Then it should hold up nicely.
https://billeder.bazoom.dk/biler/album/469/xl/2340963/projektbilen-nissan-200sx-s13-ca18det.jpg

[Jyttah]

I think its time for a small update.
The enginebay is 95% ready for paint.

I bought a small bundle of random parts for cheap. I only needed a engine harness, but i took it all.
There was some B450L injectors that should fit the CA18DET perfectly and a lot of other parts that i could sell and earn a bit of money back
https://billeder.bazoom.dk/biler/album/470/xl/2349087/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2349089/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2349090/projektbilen-nissan-200sx-s13-ca18det.jpg
On top of this, i had to order some parts from LDperformance. Say hello to Mr. Launch Control and his friend, Sir Boost controller
https://billeder.bazoom.dk/biler/album/470/xl/2349093/projektbilen-nissan-200sx-s13-ca18det.jpg

This weekend i went back to my friend so we could continue fixing the Nissan.
And ofc, i had to bring drinks
https://billeder.bazoom.dk/biler/album/470/xl/2349092/projektbilen-nissan-200sx-s13-ca18det.jpg


We cleaned up in the Nissan storage room, and i had to make it look nice :D
https://billeder.bazoom.dk/biler/album/470/xl/2349104/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2349098/projektbilen-nissan-200sx-s13-ca18det.jpg

Everytime i see how wide the car is gonna be, im surprised.
https://billeder.bazoom.dk/biler/album/470/xl/2349108/projektbilen-nissan-200sx-s13-ca18det.jpg
Always stay baconated!
https://billeder.bazoom.dk/biler/album/470/xl/2349113/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2349109/projektbilen-nissan-200sx-s13-ca18det.jpg
This picture gives me so much joy :D
https://billeder.bazoom.dk/biler/album/470/xl/2349119/projektbilen-nissan-200sx-s13-ca18det.jpg
Taking up all the space in the garage
https://billeder.bazoom.dk/biler/album/470/xl/2349127/projektbilen-nissan-200sx-s13-ca18det.jpg
Here you can see that a previous owner cut open the radiator support. And we really dont know why. But it doesnt matter, its getting replaced with a brand new one.
https://billeder.bazoom.dk/biler/album/470/xl/2349131/projektbilen-nissan-200sx-s13-ca18det.jpg
Again, there was a tag team going on. Always nice that people come to help saturday night.
https://billeder.bazoom.dk/biler/album/470/xl/2349122/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2349132/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2349117/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2349118/projektbilen-nissan-200sx-s13-ca18det.jpg
Its hard to work 12 hours a day :D
https://billeder.bazoom.dk/biler/album/470/xl/2349133/projektbilen-nissan-200sx-s13-ca18det.jpg
This is the stuff we use for the enginebay. Sponsored by Autolakhandel.dk
https://billeder.bazoom.dk/biler/album/470/xl/2349126/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2349130/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2349135/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2349138/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/470/xl/2349142/projektbilen-nissan-200sx-s13-ca18det.jpg

[supersayianjim]

kick ass thread!!!

[sXe240]

This build is just mind blowing. It's a shame there was so much rust but you really are fixing it up. I can't wait to see this car done.

[PoorMans180SX]

Looks good so far man! Nice to see someone taking the time to save a chassis.

[Jyttah]

Thanks for the nice comments. It keeps me going :P

What you all propably havent noticed is that almost everything is recorded.
So far i have none less that 218gb of pure video and counting :D

One of the things i was missing for my Gopro, was a gimbal, so after an evening on eBay, i found this one:
https://billeder.bazoom.dk/biler/album/470/xl/2349326/projektbilen-nissan-200sx-s13-ca18det.jpg
It was cheap, but it works perfectly. I still need a gimbal for my Sony A6300. But that has to wait.

I also received 6 Vband clamps for the exhaust so i can remove every part independent.
https://billeder.bazoom.dk/biler/album/470/xl/2349325/projektbilen-nissan-200sx-s13-ca18det.jpg


I also received 5 squaremeters of 200g Carbonfiber so i can start playing around with that.
With the roll of carbonfiber, i also received a bunch of small samples of other colors.
These are really awesome!
https://billeder.bazoom.dk/biler/album/470/xl/2349329/projektbilen-nissan-200sx-s13-ca18det.jpg

[sXe240]

Awesome definitely share all the footage you have (which I'm sure is a lot lol). The gold and blue carbon fiber looks awesome.

[Jyttah]

Awesome definitely share all the footage you have (which I'm sure is a lot lol). The gold and blue carbon fiber looks awesome.

Im gonna share some of the footage when me and my "editing guy" have time to make a proper video :)

And i would say all of the carbon colors looks cool. Unfortunally only the black/original carbon fits my car with the paint its getting.

[sXe240]

Im gonna share some of the footage when me and my "editing guy" have time to make a proper video :)

And i would say all of the carbon colors looks cool. Unfortunally only the black/original carbon fits my car with the paint its getting.

Haha with how much footage you say you have that may the awhile! But I hear you. I'm really following your build so I can see how much it'll take take to restore my s14. I really don't have too much rust except some surface stuff on my front fenders. The subframe actually looks good I guess cause the car was garage kept most of it's life.

[Jyttah]

Haha with how much footage you say you have that may the awhile! But I hear you. I'm really following your build so I can see how much it'll take take to restore my s14. I really don't have too much rust except some surface stuff on my front fenders. The subframe actually looks good I guess cause the car was garage kept most of it's life.

Thats so lucky. Here in Denmark youll be lucky if you can find a S13 or S14 for under 10.000 USD. And then its rusty as fuck. One in good condition costs almost twice the amount. And to import one is equally expensive because of our taxes on cars wich is one of the highest in the world. And the same reason almost everybody drives in small shittycars like VW up, Peugeot 107, Toyota Aygo and so on.

Anyway. A small update.
Besides the 5 squaremeteres of carbon fiber cloth, i also bought a single squremeter of cheaper cloth to test with.
As i only had some old intercoolerpiping, i desided to try and wrap these with the carbon fiber.
This is the first time i tried something like that, and it ended horrible. or, actually im not done yet. But i learned a lot of do's and dont's.


First of i painted the piping black as the carbonfiber cloth is a bit see-through.
Then i layed a layer of epoxy. This was the first mistake as the cloth was sliding around and made a lot of airbubles underneath.
I had to wait untill it get tacky and then put down the cloth. This took forever (over 5 hours) as its fairly cold in the warehouse where i did it.
https://billeder.bazoom.dk/biler/album/470/xl/2349634/projektbilen-nissan-200sx-s13-ca18det.jpg
I tried to make the connections on the backside so it wouldnt be vissible when they are installed. even though in not using these pipings.
Then i put down another layer of epoxy. And its still in a cold warehouse with around 10 degrees celsius.
https://billeder.bazoom.dk/biler/album/470/xl/2349638/projektbilen-nissan-200sx-s13-ca18det.jpg
Again. because of the cold, the epoxy wouldnt harden as fast as i would like it to, and then it would just run. So theres a lot of sanding to remove the runs.
https://billeder.bazoom.dk/biler/album/470/xl/2349636/projektbilen-nissan-200sx-s13-ca18det.jpg

And because its piping, and not something simple as a flat panel im carbonwrapping, i have to twist and turn it multiple times to get an even coat of epoxy. But again. Im learning by doing this :D
https://billeder.bazoom.dk/biler/album/470/xl/2349637/projektbilen-nissan-200sx-s13-ca18det.jpg

Here you can see the backside that will be hidden if these pipes would be installed:
https://billeder.bazoom.dk/biler/album/470/xl/2349639/projektbilen-nissan-200sx-s13-ca18det.jpg
It would be cut off and sanded down so it would look smooth.

And the mailman delivered some studs for the turbo and elbow.
They are 38mm M8 x 1.25 with locknuts. Even though im gonna go with Nordlock washers also.

[sXe240]

Wow damn that is pricey over there haha. Even over here in the states the price of them in the last year has skyrocketed. Sadly cause every day someone is either crashing one drifting or leaving it outside to rot away.

But that isn't too bad for your first time wrapping with c/f. Plus it looks awesome on intercooler piping. I don't think I have even seen anyone do that before. Hats off that is badass!

[Jyttah]

Well. Christmas have been pretty crazy for me. So havent had time to do any car related.

But I think its about time to make an update, even though its pretty small and not showing anything special.

First off... My friends found some more rust holes in the car. And as everybody knows, a small rusthole becomes big pretty fast!

But luckily they fixed it :P
https://billeder.bazoom.dk/biler/album/471/xl/2350777/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350776/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350789/projektbilen-nissan-200sx-s13-ca18det.jpg

Because i changed my mind with the rear overfenders, we had to remove the holes we previous drilled. and at the same time the hole for the original antenna was filled out.
https://billeder.bazoom.dk/biler/album/471/xl/2350778/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350779/projektbilen-nissan-200sx-s13-ca18det.jpg

Another friend made some logos and got them printed on some holographic sticker. Looks really cool IRL. (and you can find a small video on my instagram: https://www.instagram.com/gogo_gojira/ )
https://billeder.bazoom.dk/biler/album/471/xl/2350780/projektbilen-nissan-200sx-s13-ca18det.jpg

And now, on to more useless shit i bought for this build :D :D :D
https://billeder.bazoom.dk/biler/album/471/xl/2350781/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350785/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350788/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350796/projektbilen-nissan-200sx-s13-ca18det.jpg



And here i have a small update on the carbonskinning i tried earlier on.
Ive learned a lot of my mistakes and im actually pretty happy with the result. Here its a small test im doing on the steering reservoir.
https://billeder.bazoom.dk/biler/album/471/xl/2350790/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350792/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350793/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350794/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350798/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350800/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350803/projektbilen-nissan-200sx-s13-ca18det.jpg


And here is the intercooler piping before and after i sanded it down for hours :P
https://billeder.bazoom.dk/biler/album/471/xl/2350795/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350804/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350801/projektbilen-nissan-200sx-s13-ca18det.jpg

This piping still needs to be sanded down and have another layer of epoxy
https://billeder.bazoom.dk/biler/album/471/xl/2350799/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350802/projektbilen-nissan-200sx-s13-ca18det.jpg

Im getting the hang of it and hoping to be able to be even more efficient with the epoxy and sand as little as possible in the future.


Funny enough, i found an old picture of my previous S13
https://billeder.bazoom.dk/biler/album/471/xl/2350786/projektbilen-nissan-200sx-s13-ca18det.jpg


I had to try to put heatwrap on my elbow and manifold to see if i could do it.
Here is the result. Im not happy about it. Its to loose and i wraped it the wrong was around the manifold. But i have a lot more, so ill propably try again ;)
https://billeder.bazoom.dk/biler/album/471/xl/2350782/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350784/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2350783/projektbilen-nissan-200sx-s13-ca18det.jpg


This is it for now. But hopefully i can post a lot of progress pictures in 2 weeks time. And hopefully with painted interior and enginebay.

[sXe240]

Awesome progress dude. The more I look into your thread I get more ideas for finally restoring my S14.

[Jyttah]

Awesome progress dude. The more I look into your thread I get more ideas for finally restoring my S14.

Thanks. Hopefully we will start getting some paint on it next weekend.
And its always great to inspire people ;)

[Vwongjj]

awesome. cant wait to see the finished build

[Jyttah]

A small update from the weekend.
I dont have a lot of things to say about it, so just enjoy the pictures ;)

https://billeder.bazoom.dk/biler/album/471/xl/2351402/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351409/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351403/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351404/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351405/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351406/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351407/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351408/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351410/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351414/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351412/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351413/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351418/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351415/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351416/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351417/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351419/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351420/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351421/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351424/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351425/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351426/projektbilen-nissan-200sx-s13-ca18det.jpg

[Jyttah]

Another weekend in the garage passed.
This time there was a LOT of visible progress!

2 weeks ago the car was primed. So this weekend we went crazy with scuffing the primer and throwing some black paint on it.

As you can see on the pictures. its a pretty decent job taken in consideration that it was done in a garage. But these mistakes will be corrected when the rest of the car will be painted.
https://billeder.bazoom.dk/biler/album/471/xl/2351824/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351813/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351814/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351819/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351820/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351821/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351822/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351823/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351836/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351825/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351826/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351827/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351828/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351832/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351833/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2351835/projektbilen-nissan-200sx-s13-ca18det.jpg

[Jyttah]

So another weekend passed and we got a bit more progress on the car.

But first we had to clean the garage a bit. I borrowed some floorcleaning chemicals from work. And "accidentally" dropped a bit of it undeluted on the floor.
I think the picture speak for itself :D

https://billeder.bazoom.dk/biler/album/471/xl/2352332/projektbilen-nissan-200sx-s13-ca18det.jpg


When that was done, we installed the light mechanism and the other stuff in the front.
https://billeder.bazoom.dk/biler/album/471/xl/2352342/projektbilen-nissan-200sx-s13-ca18det.jpg
Unfortunally we figured out the right light mechanism was bend a bit. But luckely i already got a new one.

We did some sound deadening. I found a good deal om some STP Gold and some other stuff for the whole car.
https://billeder.bazoom.dk/biler/album/471/xl/2352333/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352335/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352338/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352339/projektbilen-nissan-200sx-s13-ca18det.jpg
I actually liked the gold on black theme.
This step took a bit longer than necessary, but i wanted all the "STP" logos to be in the same direction. Thanks stupid OCD :D:D:D

After the first layer of sound deadening, my friend wanted to test out my new racing seat
https://billeder.bazoom.dk/biler/album/471/xl/2352336/projektbilen-nissan-200sx-s13-ca18det.jpg

And back to next step of the sound deadening install
https://billeder.bazoom.dk/biler/album/471/xl/2352340/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352345/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352343/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352344/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352348/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352349/projektbilen-nissan-200sx-s13-ca18det.jpg

And heres the difference between non-AC and AC
https://billeder.bazoom.dk/biler/album/471/xl/2352350/projektbilen-nissan-200sx-s13-ca18det.jpg

And then installed
https://billeder.bazoom.dk/biler/album/471/xl/2352351/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352352/projektbilen-nissan-200sx-s13-ca18det.jpg


Then its time for the interior wireharness
https://billeder.bazoom.dk/biler/album/471/xl/2352353/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352354/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352362/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352356/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2352357/projektbilen-nissan-200sx-s13-ca18det.jpg

as i bought this harness secondhand, i only found this small problem. Its the speaker-wires that have been cut. This is not a problem for me, as i wanted to upgrade the speakerwires anyway
https://billeder.bazoom.dk/biler/album/471/xl/2352359/projektbilen-nissan-200sx-s13-ca18det.jpg

This is it for now. I hope that next update will be about the engine.

[BryanS14]

Looking good. My crazy self would have cleaned the Wire loom, AC box, vents and replaced the foam gaskets so there are no air leaks when the blower is on.

[Jyttah]

Looking good. My crazy self would have cleaned the Wire loom, AC box, vents and replaced the foam gaskets so there are no air leaks when the blower is on.

Thanks.
I run out of time that weekend, but the plan is to tidy up the loom and wrap it with some fabric-tape so it wouldnt rattle. And we did actually replace all the foam gaskets. Unfortunally i didnt take any pictures of it.

its on purpose that we didnt clean the AC and vents. The plan is to fix the widebody and bodykit in the near future, so theres gonna be a lot of dust all over the car. So cleaning it now, would just be double work :D

[Vwongjj]

progressing awesomely well!! I'll be starting on mine soon!! cant wait !

[Jyttah]

Well... Finally i got the time to work a bit on the S13.
Unfortunally we didnt have a lot of progress as we figured out we need to repaint some of the enginebay. The reason for this is that it was damaged in the right front corner. This destroyed the right headlight. So we welded it and painted without being able to testfit the headlight - Rookie mistake, i know.
So now the headlight sits to high and we cant get it flush with the hood and fender.

But good news. We did clean up the engineblock and gave it a bit of paint. And ofc. i bought a lot of random parts. i even found a set of cheap replica Bride seats. I know its replica. But with replica i wont be sad when i spill stuff om them.

Anyway. Heres a few pictures of the car so far:

https://billeder.bazoom.dk/biler/album/471/xl/2353255/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353256/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353257/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353258/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353259/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353260/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353261/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353262/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353263/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353264/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353265/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353266/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353267/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353269/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353270/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353275/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353271/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353272/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353273/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353274/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353276/projektbilen-nissan-200sx-s13-ca18det.jpg


Ohh yeah. i accidentally ordered these:
https://img1.croooober.com/api/v1/photo/ec/dw=700;dh=;/00000/1904/1904402/1904402003951/1904402003951s0.jpg

[Fuglychuki91]

I almost got those eurolines for some spares! They were priced good too

[Jyttah]

I almost got those eurolines for some spares! They were priced good too

Absolutely. at 179USD plus shipping i couldnt resist :P But i might throw some other lips on them in the future.

[kanyedian]

Wow, I'm pretty blown away at the amount of work you've done! This is legit a full restoration! Very impressed. Makes the small amount of work ahead of me [replacing turbo (thinking of putting T28 in place of the factory T25 on my SR20DET) and tuning the veh, low beams aren't working, and gauge cluster also not working (car is RHD swapped so maybe the one who did it didn't even connect everything :facepalm:)] seem not so scary aha.

But my experience level is only moderate, consisting of installing bolt-ons like crazy on my '08 Civic Si that I supercharged. Definitely sub'd to keep an eye on the progress! :wavey:

[Vwongjj]

Loving the rear carbon trunk tray!!!

[da_crew10]

Yeah where did you get the carbon privacy cover??????

[Jyttah]

Wow, I'm pretty blown away at the amount of work you've done! This is legit a full restoration! Very impressed. Makes the small amount of work ahead of me [replacing turbo (thinking of putting T28 in place of the factory T25 on my SR20DET) and tuning the veh, low beams aren't working, and gauge cluster also not working (car is RHD swapped so maybe the one who did it didn't even connect everything :facepalm:)] seem not so scary aha.

But my experience level is only moderate, consisting of installing bolt-ons like crazy on my '08 Civic Si that I supercharged. Definitely sub'd to keep an eye on the progress! :wavey:

Thank you for the kind words. But unfortunally i cant take all the credit. I have fantastic friends. Both a mechanic whos working on this in his sparetime and a painter whos willing to spend time on this small project ;)
I also started out with doing basic stuff like changing oil and filter and so on. And now we just went all in and restorating the whole car as its getting pretty rare in Denmark. But the whole S-chassis community is so big and helpful, so its always easy to find the help you need :D
But the best advise i can give, is to do your research and take your time, it can safe your car :P


Loving the rear carbon trunk tray!!!
Thanks. Unfortunally its only a prototype as its full of errors. But im working on creating "The final one"


Yeah where did you get the carbon privacy cover??????
I made it myself ;)
Heres a few pictures. As you can see, i used an original to get the shape. But i hated the big holes for speakers, so this was the coolest way to remove them :D

https://billeder.bazoom.dk/biler/album/471/xl/2353284/projekt-hattehylde.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353293/projekt-hattehylde.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353285/projekt-hattehylde.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353286/projekt-hattehylde.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353288/projekt-hattehylde.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353289/projekt-hattehylde.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353290/projekt-hattehylde.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353292/projekt-hattehylde.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353298/projekt-hattehylde.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353294/projekt-hattehylde.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353296/projekt-hattehylde.jpg
https://billeder.bazoom.dk/biler/album/471/xl/2353297/projekt-hattehylde.jpg

[Vwongjj]

that is awesome! i cant wait to see version 1.2! its definitely gonna be way better

[Jyttah]

Im back!
Unfortunally i dont have that many updates. This is because of some stress related health issues and the fact that my company no longer allows me to do private work at the workplace. But luckily my wife and i are moving to a house with a small shed where i can do all my funny business.


I ordered a metal slam panel on croooober, but didnt like the raw metal look. So i wrapped it in some leftover carbon fiber. Its very good practice, and i actually am very pleased with the result.
https://billeder.bazoom.dk/biler/album/472/xl/2357636/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2357634/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2357645/projektbilen-nissan-200sx-s13-ca18det.jpg

I also ordered some copper pigment that i tried to put into some of the epoxy, It looks cool, but im not gonna use it on the car.
https://billeder.bazoom.dk/biler/album/472/xl/2357633/projektbilen-nissan-200sx-s13-ca18det.jpg


Over a year ago i bought a cheap dash, that i wanted to do something to. In the start i wanted to integrate some 52mm holes for gauges, but figured that it would be to 2005. So i desided just to flock it. I went on ebay and ordered a complete flocking kit and went crazy.
This was a BIG mistake!
The "glue" was some paint that dried so fast that 3 people couldnt put it on properly, so we had to put it on over 3 days - and it looks like shit. Im very displeased, but you can see the result in the pictures.

https://billeder.bazoom.dk/biler/album/472/xl/2357637/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2357639/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2357640/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2357641/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2357641/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2357644/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2357649/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2357648/projektbilen-nissan-200sx-s13-ca18det.jpg


Next project will be to remove the flocking from the dash and try something else.


Another really bad thing about the car - we have to install a new radiator core support as mine is bend more than we thought. I ordered and paid it 2 month ago, and hopefully it will arrive in the end of this month.

But i received my Work Euroline DH wheels! This have been hell. The danish postal service is extremely bad. Dont know anything about customer service.
The story is kinda funny though. I ordered the wheels from Crooober in Japan with cheapest shipping (about 2 months of shipping) It arrived in Copenhagen, Denmark. The danish postal service returned the wheels to japan because they were to heavy. Didnt even give me the opportunity to drive 300km to pick them up myself. And they were returned by air. A few days after i was contacted by Crooober customerservice telling me that the wheels have been returned and suggested to ship my 4 wheels in 4 individually packed boxes. I agreed and waited another 1½-2 months.
All 4 wheels arrived in Copenhagen, Denmark and was there untill i paid the import charges. This was done instantly.

The 2 first wheels was delivered at my work where they were left together with some trash and my colleague was very close to throw them out. I contacted the postalservice and said i have never received anything, and the day after the deliveryman came by and asked if we didnt find the wheels, I told him that we had the wheels there the whole time, but i just wanted to make it perfectly clear for him that NEVER leave packages without a signature at a company.

Wheel number 3 came a few days later and it was signed for.

But wheel number 4...
Ohh boy... Let me repeat that the danish postalservice have the WORST customerservice ever!
I wrote to them telling that i can see the package havent been released from customs. They said it was because i havent paid the import fees - i had, and had proof of this. They couldnt help and told me to call their customerservice. I called the customerservice, waited around 30 minutes and because they dont have access to the import-information. I was told to call another number. This was a direct line and it only took 5 minutes. Here i was told to send the receipt of the import fee to the same mail-address as i wrote to in the start... After a week i called again, and they couldnt find the fucking package!!!
In the end the last wheel arrived, so i now have a complete set of Work Euroline DH 18x8/9.

https://billeder.bazoom.dk/biler/album/472/xl/2357652/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2357655/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2357657/projektbilen-nissan-200sx-s13-ca18det.jpg


As stated in the start, my wife and i are moving in the near future. So she thought it was smart to sell our sofa. So i was an opportunity for a bit of interior design!
https://billeder.bazoom.dk/biler/album/472/xl/2357658/projektbilen-nissan-200sx-s13-ca18det.jpg


My mechanic talked something about us needing some conrod bolts and nuts. So i ordered a set of ARP.
https://billeder.bazoom.dk/biler/album/472/xl/2357659/projektbilen-nissan-200sx-s13-ca18det.jpg



Last but not least, my wife needed a car, and i wanted my daily driver back, so we sold our Suzuki WagonR (that i wanted to make widebody) and she bought a Toyota Yaris Hybrid. Fun little car if you can get used to the e-cvt gearbox.

https://billeder.bazoom.dk/biler/album/472/xl/2357660/projektbilen-nissan-200sx-s13-ca18det.jpg

I hope that the next update will come within a month or so ;)

[PatPs13]

Im back!

My mechanic talked something about us needing some conrod bolts and nuts. So i ordered a set of ARP.
https://billeder.bazoom.dk/biler/album/472/xl/2357659/projektbilen-nissan-200sx-s13-ca18det.jpg


Best part about ordering parts from Euro companies is the candy they send in the packages :bowdown:

The postal customer service sounds about on par with the USPS as well.

[Jyttah]

Best part about ordering parts from Euro companies is the candy they send in the packages :bowdown:


Haha. Gotta love europe for all the candy :P

Anyway, ive had a few surprises in the last few days.
An old friend who is going to modify my oil pan/sump send me a few pictures of the process. And it looks very promising!

It was sandblasted on the outside, and he started to draw the larger pan so theres room for more oil, and of course some baffles. Do i need this? no. But we do this because we can :D

https://billeder.bazoom.dk/biler/album/472/xl/2358230/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2358226/projektbilen-nissan-200sx-s13-ca18det.jpg


Also, after months of waiting, my part from Nissan finally arrived! Only took about 2 months as it needed to be shipped all the way from Japan. But here it is!
Item number 62500-53F00 - The complete front!
https://billeder.bazoom.dk/biler/album/472/xl/2358225/projektbilen-nissan-200sx-s13-ca18det.jpg

So now we can finally get it all put properly together so my painter can do his job.

[Allen2688]

Also, after months of waiting, my part from Nissan finally arrived! Only took about 2 months as it needed to be shipped all the way from Japan. But here it is!
So now we can finally get it all put properly together so my painter can do his job.

Wow, how did you manage to get a new front core support assembly, I thought they were discontinued?

[Jyttah]

Wow, how did you manage to get a new front core support assembly, I thought they were discontinued?


I just went to the local Nissan dealership, threw around 500USD after them and they ordered one from japan. 2 months after it arrived ;) But yes, they are getting hard to get.

[Jyttah]

I have a small update on the engine.
We finally got some of it back together.
We started with freshly honed cylinders and a beer to plan the weekend.
https://billeder.bazoom.dk/biler/album/472/xl/2358411/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2358413/projektbilen-nissan-200sx-s13-ca18det.jpg

I ordered King Racing bearings in standard size for both main and rods
https://billeder.bazoom.dk/biler/album/472/xl/2358412/projektbilen-nissan-200sx-s13-ca18det.jpg

And they were installed with plastigage 0,025 inch / 0,076mm
https://billeder.bazoom.dk/biler/album/472/xl/2358428/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2358414/projektbilen-nissan-200sx-s13-ca18det.jpg

And the result was this:
https://billeder.bazoom.dk/biler/album/472/xl/2358415/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2358416/projektbilen-nissan-200sx-s13-ca18det.jpg

Looks pretty good so far.

Then it was time to put it together for the final time.
we used excessive amounts of Royal Purple Max-tuff assembly lube.
https://billeder.bazoom.dk/biler/album/472/xl/2358417/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2358420/projektbilen-nissan-200sx-s13-ca18det.jpg

On to the pistons. Here we are using stock pistons, but with RIK pistonrings and ARP bolts and nuts
https://billeder.bazoom.dk/biler/album/472/xl/2358422/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2358424/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2358426/projektbilen-nissan-200sx-s13-ca18det.jpg


And again, we used Plastigage to meassure clearances. And they were perfect within spec.
https://billeder.bazoom.dk/biler/album/472/xl/2358425/projektbilen-nissan-200sx-s13-ca18det.jpg

When all 4 pistons were back, we installed the oilconsole, oil and waterpump
https://billeder.bazoom.dk/biler/album/472/xl/2358427/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2358433/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2358429/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2358431/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2358432/projektbilen-nissan-200sx-s13-ca18det.jpg


And thats how far we got that weekend.
Im hoping that we will get the radiatorsupport installed in the near future. But well see.

https://billeder.bazoom.dk/biler/album/472/xl/2358419/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2358418/projektbilen-nissan-200sx-s13-ca18det.jpg

[Vwongjj]

Nice Update!! Damn I would love an upgraded oil sump for my CA too!!

[Touge_Monster]

Awesome build! Stay with it!!

[Jyttah]

So... Disaster happend.
My mechanic took the front apart to install the new radiator support. And he found this small error:
https://billeder.bazoom.dk/biler/album/472/xl/2359329/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359332/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359331/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359330/projektbilen-nissan-200sx-s13-ca18det.jpg

Is this even possible to safe? if so, how?
Making a tube front is not an option as its gonna be used for street. And the laws in this country does not accept something like that.


But on a sidenote, i finally picked up a hood i bought 10 years ago for my old S13:
https://billeder.bazoom.dk/biler/album/472/xl/2359333/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359334/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359335/projektbilen-nissan-200sx-s13-ca18det.jpg

[cherryhatch]

Hopefully one of your awesome friends owns a frame rack!! Hahaha, but seriously it is unfortunate finding that damage after the engine bay had been painted :(

[ingmar F]

in the netherlands they have company's that have a frame straightening bench.. i don't know if you have something like that in your area. but i think they can fix that for you

[Jyttah]

https://pbs.twimg.com/media/CILw47_WsAAENCU.jpg
I had an awesome friend who got the front back where it belonged. We spend hours meassuring so everyting is exact where it should be. All with the help of a big hammer, some wood and a jack (and some beer)

Here is the after pictures where you can see how much we moved the front:
https://billeder.bazoom.dk/biler/album/472/xl/2359390/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359388/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359389/projektbilen-nissan-200sx-s13-ca18det.jpg

Installing the lights on the radiatorsupport for easier install:
https://billeder.bazoom.dk/biler/album/472/xl/2359393/projektbilen-nissan-200sx-s13-ca18det.jpg


And welded it back where it belonged after even more messurements
https://billeder.bazoom.dk/biler/album/472/xl/2359391/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359392/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359398/projektbilen-nissan-200sx-s13-ca18det.jpg

Now when the radiatorsupport FINALLY is installed for the last time in the cars lifetime, i moved forward tomaking brackets for the frontmount Mishimoto intercooler. This is the first edition to see how it would fit behind the TypeX bumper.
https://billeder.bazoom.dk/biler/album/472/xl/2359394/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359395/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359396/projektbilen-nissan-200sx-s13-ca18det.jpg

Unfortunally it didnt fit as the TypeX bumper sits pretty close to the radiatorsupport.


But by making the lower intercooler brackets shorter, it got more angle, and it looks like it would fit if i trimmed the bumper and indicator plastic a bit.
https://billeder.bazoom.dk/biler/album/472/xl/2359397/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359401/projektbilen-nissan-200sx-s13-ca18det.jpg

If youre reading this, please give Order42 a follow on facebook and/or instagram. Links below the picture:
https://billeder.bazoom.dk/biler/album/472/xl/2359399/projektbilen-nissan-200sx-s13-ca18det.jpg

http://facebook.com/order42
https://www.instagram.com/_order42_/
We are trying to create cheap and affordable S-chassis t-shirts and hoodies with free worldwide shipping (around 15USD for tshirt and around 30USD for hoodies). But the designs are still in the works - If you have any designs, please message me ;)

Anyway, back to business.
After the intercooler was where we wanted it to be, it was time to drill holes for the intercooler piping. Luckily my eye meassurements were spot on (only had one beer when it happend)
https://billeder.bazoom.dk/biler/album/472/xl/2359400/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359402/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359406/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359407/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359408/projektbilen-nissan-200sx-s13-ca18det.jpg

When we are working on my car, we always have fun and play around. Its always better to have some friends who enjoy the same hobbies.
https://billeder.bazoom.dk/biler/album/472/xl/2359403/projektbilen-nissan-200sx-s13-ca18det.jpg

They also started looking at my head and made it ready for some new gaskets and so on...
https://billeder.bazoom.dk/biler/album/472/xl/2359405/projektbilen-nissan-200sx-s13-ca18det.jpg

I had a quick look under the car, and realized that i cant wait until we have the whole underside rustfree and coated. Theres a few spots where we need to weld in some new metal. But overall it looks pretty good for a 30 year old car in a country where we use excessive amounts of salt on the roads in the winter.
https://billeder.bazoom.dk/biler/album/472/xl/2359404/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359409/projektbilen-nissan-200sx-s13-ca18det.jpg

[Jyttah]

And i just got a few pictures of the progress of the sump. It looks really promising!

https://billeder.bazoom.dk/biler/album/472/xl/2359435/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359418/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359423/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359419/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359420/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359421/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359422/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359424/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359425/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359426/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359427/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359431/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359429/bundkar-design.jpg
https://billeder.bazoom.dk/biler/album/472/xl/2359430/bundkar-design.jpg

I would love to design stuff for the car, so im starting to learn how to use Solidworks. And no, its not easy, but i like a Challenge :P

[Jyttah]

Time for another update.
I had a single day where i went to look at the car. This time i had to do something different.

My friend who are creating the oilpan for me, asked me if i can figure out how much space there is for a intake and exhaust manifold as he would like to design these. So i had to figure out how to get these measurements. The car is 360km away from him, so its not possible for him to go and do the measurements himself.

After a LOT of research, i found a solution. My friend is a technical designer among other things, so if i could create the enginebay digitally, he can work with that. So the solution is a 3D scanner.


https://www.instagram.com/p/B86oz2unQtz/
https://billeder.bazoom.dk/biler/album/473/xl/2360107/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360106/projektbilen-nissan-200sx-s13-ca18det.jpg

So now he can create everyting without even getting his hands dirty :P
Next stop, is to 3D scan the CA18DET engine.




I also had an extra instrumentcluster. Here i thought about adding the Defi Advance ZD into. But after a lot of playing around, its not possible due to the 2 buttons on it.
Instead i wanted to create a Carbon face to make it a bit more exclusive. The face will be made of only 2 layers of carbonfiber cloth - wich means its only around 0.4mm thick! Perfect for this application.
https://billeder.bazoom.dk/biler/album/473/xl/2360102/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360104/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360105/projektbilen-nissan-200sx-s13-ca18det.jpg




My mechanic took the valves out of the head, and they look pretty good. No need to change anything here
https://billeder.bazoom.dk/biler/album/473/xl/2360108/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360113/projektbilen-nissan-200sx-s13-ca18det.jpg



Last but not least, I have to do some fiberglass work, so we can get the car ready for paint.
The rear valances have to be extended around 2-11mm to follow the OEM lines and the right overfender had to be shortened 2mm in the end.
Nothing a bit of fiberglass cant handle :P
https://billeder.bazoom.dk/biler/album/473/xl/2360112/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360111/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360110/projektbilen-nissan-200sx-s13-ca18det.jpg

[Dolph_KYAS13]

Was that scanned with an xbox Kinnect? Ive had some success with that in the past. keep us posted with the CAD screenshots.

[Jyttah]

Was that scanned with an xbox Kinnect? Ive had some success with that in the past. keep us posted with the CAD screenshots.

Yes. it was made with the Kinect sensor ;)
Im planning to do some 3d scanning of multiple parts for the car so i have them for future use

[Jens]

Awsome build Topic man! Personally I'm not a big fan of the widebody. But with the attention to detail its pretty cool man! Keep up the good work.

[Jyttah]

Awsome build Topic man! Personally I'm not a big fan of the widebody. But with the attention to detail its pretty cool man! Keep up the good work.

Thanks! I didnt like the widebody at first, but after ive been looking at it for quote some time, i actually like it as it makes the car look lower and more aggressive ;)

[Jyttah]

I guess the devil is in the details.
I have a spare instrument cluster, so i wanted to install my Defi Advance ZD instead of the rpm. But after some looking around, i noticed its not possible as i couldnt access the bottoms. So i wanted to do something else.

Ive previous been working with carbonfiber, i figured it could be cool to have inside the instrument cluster.

I started with a small piece of carbon i had laying around. As its only 2 layers of carbon cloth, its very thin. but its perfect for this application because we dont need any strength.
https://billeder.bazoom.dk/biler/album/473/xl/2360585/projekt-hattehylde-plus-andet.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360586/projekt-hattehylde-plus-andet.jpg

I cut it down and sanded it so it would fit inside the instrumentcluster.
https://billeder.bazoom.dk/biler/album/473/xl/2360587/projekt-hattehylde-plus-andet.jpg
And remember, ALWAYS use a mask when cutting or sanding carbon fiber.
https://scontent-arn2-1.xx.fbcdn.net/v/t1.0-9/p720x720/90982755_10158176005914630_5628010658030157824_o.j pg?_nc_cat=110&_nc_sid=1480c5&_nc_ohc=0wFK5ekSnZMAX9Syhg6&_nc_ht=scontent-arn2-1.xx&_nc_tp=6&oh=35e28b6d13f142a7b6fd1bc68dc512f2&oe=5EA71BB9

After all the cutting and sanding it was washed to remove the dust. Then its time for some epoxy. Here i can give it some extra color/glitter. and it gives me the possibility to wetsand it so it gets extremely glossy.

https://billeder.bazoom.dk/biler/album/473/xl/2360590/projekt-hattehylde-plus-andet.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360588/projekt-hattehylde-plus-andet.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360591/projekt-hattehylde-plus-andet.jpg


I also painted the surrounding plastic as previous owner painted it purple, so i found some mat black that fits the whole theme.
Together with the carbon, it looks really good and clean.
https://billeder.bazoom.dk/biler/album/473/xl/2360589/projekt-hattehylde-plus-andet.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360593/projekt-hattehylde-plus-andet.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360592/projekt-hattehylde-plus-andet.jpg

It all went pretty well, so i decided to make some more.
https://billeder.bazoom.dk/biler/album/473/xl/2360594/projekt-hattehylde-plus-andet.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360597/projekt-hattehylde-plus-andet.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360598/projekt-hattehylde-plus-andet.jpg

Next stop is to cut out for all the gauges.
This part sounds easy, but as the piece is very thin, and the holes are small an narrow, it makes it very difficult - Please excuse the rough cuts, I still havent sanded all the edges yet.
https://billeder.bazoom.dk/biler/album/473/xl/2360599/projekt-hattehylde-plus-andet.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360600/projekt-hattehylde-plus-andet.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360584/projekt-hattehylde-plus-andet.jpg

I have these cutouts leftover that i dont know what to use them for. Does anyone have any idea?
https://billeder.bazoom.dk/biler/album/473/xl/2360603/projekt-hattehylde-plus-andet.jpg

[Jyttah]

So... Im sure that im not the only one going crazy in this lockdown.
I was supposed to start in an aviation-related company just before all this happend, so it has been postponed to an unknown date.
This is giving me WAY to much time on my hands.
Its good but its also bad!

So i went to look at a another S13.
The car is without danish tax as its been importet from UK about 10 years ago.
It since have been sitting in a barn, so we can call this a barnfind :)

The engine was build by JAPengines.co.uk and afaik it have Wiseco pistons and some other goodies.
The car itself have very little rust, but somebody thought it would be funny to airbrush the whole freaking car!!! On top of that, it have some very 2000's bodykit that i have no idea what is :D
To top it off, the price for this car is... and hold on! 3100euros or 3300USD...

Im still thinking about buying it and get it back together. All parts for the car is there, complete interior with S14 leatherseats and so on...

https://billeder.bazoom.dk/biler/album/473/xl/2360996/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360995/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360994/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360993/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360991/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360990/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360989/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360988/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360987/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360986/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360985/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360984/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360983/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360982/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360981/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360980/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2360979/projektbilen-nissan-200sx-s13-ca18det.jpg


Would you buy it? :D

[IIIXziuR]

I would buy it exclusively for that amazing dragon airbrush artwork, m8. Sensational.

[Jyttah]

I would buy it exclusively for that amazing dragon airbrush artwork, m8. Sensational.

Well... Thats exactly what i did!! Gotta get some of the Dragonpower!

[Jens]

You now got to save the dragon man!

[Jyttah]

So i think its pretty long time ago i last updated this thread.

And the answer is: Yes i bought the dragon S13. Build thread is here: https://zilvia.net/f/showthread.php?t=673779

Anyway. Ive have a few pictures of the rear fenders being re-welded as i wasnt happy with the first try.
And my friend is also in the middle of cleaning and making the head nice an pretty.

https://billeder.bazoom.dk/biler/album/473/xl/2364317/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364319/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364320/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364321/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364322/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364323/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364324/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364325/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364326/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364327/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364328/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364329/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364330/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364331/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364332/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364333/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364334/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364335/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364336/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/473/xl/2364338/projektbilen-nissan-200sx-s13-ca18det.jpg

[Jyttah]

Im sorry! I havent updated this thread in a long time.
The main reasons are that the car is located 3 hours drive away from me, and i have another car that takes a lot of my time. Mainly because its a lot closer to me than this one.
But luckily ill get this car home soon.
https://billeder.bazoom.dk/biler/album/474/xl/2366404/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/474/xl/2366405/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/474/xl/2366406/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/474/xl/2366407/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/474/xl/2366408/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/474/xl/2366403/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/474/xl/2366410/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/474/xl/2366411/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/474/xl/2366412/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/474/xl/2366413/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/474/xl/2366414/projektbilen-nissan-200sx-s13-ca18det.jpg
https://billeder.bazoom.dk/biler/album/474/xl/2366415/projektbilen-nissan-200sx-s13-ca18det.jpg

When i get it home, ill remove the rear subframe to rebuild it properly, and to move the 5lug conversion to the other S13 i have.
Then i have to clean the whole underside so i can give it some proper protection so it will last in Denmark. I also used the TypeX bodykit on the other S13 as its a RHD, and its a lot more fitting when im going to a TypeX look-a-like. So this means im on the lookout for an agressive kit for this car. Im 90% sure itll be some Originlabo Racing line. But time will tell ;)

Anyway, this is just a small update. Ill be back with more when the car gets back.

Im thinking about doing some youtube videos on putting it back together. But are people interested in that?