pivot shift knobs, 880cc top feed bosch injectors and koyo sr rad.

[nismo racer]

whats up fellas, have a few things i have kept for a while and have no use for them.

first off i have some modified bosch top feed injectors. sold to me as 1000cc injectors but after sending them to driftmotion they told me they flowed more like 880cc. they will flow up too 1000cc at 90% duty cycle. passed all the tests. they are 14mm lower o ring and 12mm top o ring, can work with 14mm top feed rail but will need 14mm o rings. i can help you cross reference an o ring off a 997 injector that will work. $100 shipped

https://farm2.staticflickr.com/1799/42927370002_bad0d2c8b0_k.jpg (https://flic.kr/p/28pkZx1)0C673317-FD15-40A2-9FBB-341B85424DC6 (https://flic.kr/p/28pkZx1) by Ivan Camacho (https://www.flickr.com/photos/drift-tales/), on Flickr

https://farm2.staticflickr.com/1799/41166678450_370ae5cc0b_k.jpg (https://flic.kr/p/25HKZh7)CCD3EBB8-FAD2-4B4D-922F-D26642AB2BDD (https://flic.kr/p/25HKZh7) by Ivan Camacho (https://www.flickr.com/photos/drift-tales/), on Flickr

https://farm2.staticflickr.com/1783/41166679400_9bb157134e_k.jpg (https://flic.kr/p/25HKZyu)50811D14-20CE-451F-A5F0-BC7D8172AE13 (https://flic.kr/p/25HKZyu) by Ivan Camacho (https://www.flickr.com/photos/drift-tales/), on Flickr

next i have two pivot itai shift knobs. one is for 240sx (one on the right) the other when i bought it said it was for rx7(one on the left) but it threads on to s chassis. the inlet hole into the shift knob will not fit on a stock shifter. might work on after market shifter if the tapered part is far enough down or if you have an extender. both are polished now. $100 shipped each.

https://farm2.staticflickr.com/1839/42075146245_cdc2df6613_k.jpg (https://flic.kr/p/277386X)1272000E-D0A1-4495-B98F-6918C3A1CB4C (https://flic.kr/p/277386X) by Ivan Camacho (https://www.flickr.com/photos/drift-tales/), on Flickr

https://farm1.staticflickr.com/888/28108099137_8e7ce0a3a4_k.jpg (https://flic.kr/p/JPPmAV)E985398A-E5FD-4B54-BDC6-92ABC5CFBEA1 (https://flic.kr/p/JPPmAV) by Ivan Camacho (https://www.flickr.com/photos/drift-tales/), on Flickr


last i have a koyo rad for s13 sr. not much to say than that it works, hold water and has seen better days. no cap with it ill snap a pic and add it tomorrow $50 will ship at buyers expense.

https://farm2.staticflickr.com/1781/28122219517_1bbe4dec00_k.jpg (https://flic.kr/p/JR4J6K)722F1431-7F06-4C4B-AC17-439AA3B7519C (https://flic.kr/p/JR4J6K) by Ivan Camacho (https://www.flickr.com/photos/drift-tales/), on Flickr

https://farm2.staticflickr.com/1763/42940688662_f3c77d3763_k.jpg (https://flic.kr/p/28qwfH5)98F7C544-3FA3-475B-96FD-7F611F84FA41 (https://flic.kr/p/28qwfH5) by Ivan Camacho (https://www.flickr.com/photos/drift-tales/), on Flickr

[RalliartRsX]

Whats the price on the injectors?? Also in for pics on Rad. PM pics. Really interested

[nismo racer]

my mistake, i added a price to the injectors.

[nismo racer]

added pics of the radiator for those who were interested.

[nismo racer]

Forth of July bump!

[nismo racer]

Last bump and price drop.

[wolf904]

Dumb question but what is applied to the inside of the radiator? Looks useful to prevent chafing from vibration of the shroud causing a leak.

[nismo racer]

To me that looks like a door seal you can buy at a hardware store to keep your closed door from letting cold or heat out.

[nismo racer]

S13 pivot shift knob sold.