240sx Partout - Meisters, Spirit Rei, Ganadors, Parts Shop Max etc

[OpenThrottle]

Name: AJ

Item(s): Parts list is below

Price: Prices listed below do not include shipping or Paypal fees

Location: Mebane, NC

Contact info: post in thread or PM me



Getting out of the 240 game. 95% of the parts were bought new about 3 years ago. I was the first person with the full Spirit Rei kit in the states. Parts have never seen the road but have been used for extensive test fitting.



Any questions feel free to ask. Prices are O.B.O but please be reasonable with this. I am not taking low ball offers.



Shipping on the smaller items will be charged to the buyer. The larger items, that would be a pain to ship, will be local pickup only.







-Work Meister S1 3P F-18x10 -20 R-Disk 4.5" lip / R-18x12.5 -39 O-Disk 8" lip w/ 24k Gold bolts (Clears Z32 calipers. Will come w/ original Works bolts and extra 24k bolts) - $3200

-Spirit Rei 3pc kit (Front bumper, L&R Side Skirts, Rear bumper in half-carbon fiber option) - $2000

-Spirit Rei F&R fenders (Front 45mm, Rear 65mm with gas door) - $1000

-D-MAX D1 Hood - $700

-Works Bell Rapfix 2 Quick Release - $300

-2x BiMarco Futura's w/ extra seat covers (FIA Approved - Homologation until 2022) - $800 (4 extra seat covers - 2x black and 2x red - will get pictures of the covers) (Fitment is comparable to Bride Zeta XLs)

-Universal Seat Sliders - $70 (will get pictures of this)

-Parts Shop Max Front Knuckles - $340

-Parts Shop Max Rear Lower Control Arms - $480

-Parts Shop Max Rear Camber Arms - $200

-Rear Subframe - $100 (will get pictures of this)

-Drift Armor F&R Bash Bars - $240

-Xcessive Z32 trans S13 mount, SS clutch line, Xcessive Z32 short shifter bracket kit & Z1 Chromoly Clutch Pivot ball - $300

-S13 diff - $180



-Project Kics R40 - SOLD

-Spirit Rei Front & Side Half-Carbon Fiber Diffusers - SOLD

-Seibon CF Trunk - SOLD

-Ganadors (power mirrors but can be used as manual mirrors) - SOLD

-180sx Kouki Wing - SOLD

-180sx Headlights - SOLD

-180sx Kouki Tails w/ Carbon Fiber trim option - SOLD

-Circuit Sport Clear Side Markers - SOLD

-Dmax Clear Front Turn Signals - SOLD

-Works Bell Hub Kit - SOLD

-Momo Suede Steering Wheel - SOLD

-Parts Shop Max Front Lower Control Arms (straight version) - SOLD

-SPL Outer Tie Rods with Z32 inners - SOLD

-Parts Shop Max Rear Knuckles - SOLD

-Parts Shop Max Rear Toe Arms - SOLD

-Parts Shop Max Rear Traction Arms - SOLD

-Parts Shop Max Subframe Risers - SOLD

-Steering Rack w/ ES bushings - SOLD

-Z32 30mm Brakes - SOLD

-Carbon Fiber Glove Box Cover - SOLD

-S14 Front Subframe - SOLD

-Z32 5 Speed Trans - SOLD

-RCI 15gal Fuel Cell - SOLD



https://i.imgur.com/W8N7h8e.jpg?1



https://i.imgur.com/jMLrgKn.jpg?1



https://i.imgur.com/Nj0fZzT.jpg?1



https://i.imgur.com/RRsxVNk.jpg?1



https://i.imgur.com/U65RuGf.jpg?2



https://i.imgur.com/aofhu80.jpg?1



https://i.imgur.com/eDWxgaH.jpg?1



https://i.imgur.com/qTTNgOW.jpg?1



https://i.imgur.com/zfs5Z4y.jpg?1



https://i.imgur.com/HJlHtBY.jpg?1



https://i.imgur.com/zMtOPzK.jpg?1



https://i.imgur.com/VMSz6Lg.jpg?1



https://i.imgur.com/WNLlJAD.jpg?1



https://i.imgur.com/ioont2Q.jpg?1



https://i.imgur.com/tU702fJ.jpg?1



https://i.imgur.com/fEdmA5C.jpg?1



https://i.imgur.com/xnfSFzx.jpg?1







The 2 small issues with the kit. Easily fixable with some bondo and some fiberglass:



Passenger fender:

https://i.imgur.com/LgmAure.jpg?1



Passenger side skirt:

https://i.imgur.com/fWoeRBv.jpg?1

[djtoonjr]

pics of headlights, and carbon glove box?

[d_nice]

Wow good parts here. Bump for the man.

[OpenThrottle]

pics of headlights, and carbon glove box?

Pictures are in the original post. Are the pictures not showing?

[Fitelite240]

WOW. something had to have happened to you man. this is pristine stuff to build an entire car. If it was s14 stuff id be all over it. GLWS

[OpenThrottle]

WOW. something had to have happened to you man. this is pristine stuff to build an entire car. If it was s14 stuff id be all over it. GLWS

A 370z Nismo happened lol and thanks

[Fitelite240]

HAHA makes sense. Wish I had enough for those works. Looking like it would be just what I need. funny enough I think I'd need to get them rebuilt for a lower offest. I'm going for a very aggressive looks, doing like a -58 F and -72 Rear.

[OpenThrottle]

HAHA makes sense. Wish I had enough for those works. Looking like it would be just what I need. funny enough I think I'd need to get them rebuilt for a lower offest. I'm going for a very aggressive looks, doing like a -58 F and -72 Rear.

Crazy offset. Let me know if you end up wanting them. You can always sell the lips to recoup some of the money.

[Fitelite240]

Will do bud.

[CrimsonRockett]

Can't say that I blame you for it since I've contemplated getting rid of mine now that my hoarding greatly surpasses R34 territory, but there's something about them that just keeps me around.

Hopefully you don't regret the move

Good luck! Sending this to a few of my friends that were considering Spirit Rei.

[OpenThrottle]

Can't say that I blame you for it since I've contemplated getting rid of mine now that my hoarding greatly surpasses R34 territory, but there's something about them that just keeps me around.

Hopefully you don't regret the move

Good luck! Sending this to a few of my friends that were considering Spirit Rei.

Yeah, I’ve been contemplating it the last few days and I know that in some ways I will regret it but once I start doing stuff to the Z, then I will probably forget all about it. I’ve missed having a Z for a while now.

Much appreciated bud!

[DoingOK]

Very nice parts list you have there. My son messaged you about the 180SX rear wing. Is it an oem unit and do you have all the hardware? Thanks in advance.

[OpenThrottle]

Very nice parts list you have there. My son messaged you about the 180SX rear wing. Is it an oem unit and do you have all the hardware? Thanks in advance.

As far as I know its an OEM wing. The hardware is built into the wing.

[DanielZ]

Sent a message

[deadghost]

Impressive and respectable part out you have listed. Do you still have the rear lower control arms FS?

[djtoonjr]

Pictures are in the original post. Are the pictures not showing?

I let the page load for like 25 minutes. I'm in Iraq atm so internet was just sucking and didn't load the pictures till just this morning. Sorry about that bud. Lol

[OpenThrottle]

Impressive and respectable part out you have listed. Do you still have the rear lower control arms FS?

I do.


I let the page load for like 25 minutes. I'm in Iraq atm so internet was just sucking and didn't load the pictures till just this morning. Sorry about that bud. Lol

Lol no worries. I was thinking IMGUR.com was acting up for some reason.

[BossBunny]

Bump, great seller!

[speedgod^s13]

Any pictures of the wheels on the 13? I'm curious to see how much camber you were running to fit the rears.

[OpenThrottle]

Any pictures of the wheels on the 13? I'm curious to see how much camber you were running to fit the rears.



Not much honestly. -3 or -4 degrees

https://i.imgur.com/xnfSFzx.jpg


Sent from my iPhone using Tapatalk

[speedgod^s13]

Hmm, I've got the same kit. These are tempting. 3800, no tires, right?

[OpenThrottle]

Hmm, I've got the same kit. These are tempting. 3800, no tires, right?



Correct


Sent from my iPhone using Tapatalk

[speedgod^s13]

Correct


Sent from my iPhone using Tapatalk

I assume with those specs, these were rebuilt right?

[OpenThrottle]

I assume with those specs, these were rebuilt right?



Correct, just the rears though. I bought them brand new at the same time I bought my kit back in August of 2014. All ordered through TougeFactory. The original specs were the same as the actual red Spirit-Rei hatch that was on Stance-nation (F: 18x10 -20 and R: 18x11 -20)

Then I bought the gold bolts and widened the rears by a 1.5 inches with new lips. The original rear specs didn’t fit the way I wanted them and the red Spirit-Rei car actual ran spacers as well. So it only made sense to widen them.

In all honesty, I haven’t even tightened all the bolts down to torque specs and put new sealant on the rears. They have been hanging on my wall in the garage for probably over 2 yrs.


Sent from my iPhone using Tapatalk

[speedgod^s13]

When I read the offsets on the red spirit rei car, it was 18x9.5 -3 and 18x11.5 -17. I'm somewhat interested in these, but I'm debating on just having a set built, since it would be roughly around the same price, maybe even cheaper, as well as going for more lip up front. Not trying to shit talk your price, I'm just weighing my options.

[OpenThrottle]

When I read the offsets on the red spirit rei car, it was 18x9.5 -3 and 18x11.5 -17. I'm somewhat interested in these, but I'm debating on just having a set built, since it would be roughly around the same price, maybe even cheaper, as well as going for more lip up front. Not trying to shit talk your price, I'm just weighing my options.



I got offsets directly from my vendor. They reached out to Spirit-Rei.

I am breaking even at my price on the wheels. As I’ve posted on the original post. All prices are o.b.o.

Plus I had to wait about 8 months or so for my wheels to get in from Japan. So you may have to do the same.

Plus if you get the Work gold bolts, you will be adding about $600 to the price of the wheels. They are really expensive from Work Wheels. So by the end, you will be around the same price.


Sent from my iPhone using Tapatalk

[Xaser]

the holes on Seibon CF Trunk are for the oem wing? or another wing ??

Do you sell only the rear bumper , and the carbon fiber trunk?

cheers

[OpenThrottle]

the holes on Seibon CF Trunk are for the oem wing? or another wing ??



Do you sell only the rear bumper , and the carbon fiber trunk?



cheers


They are for 180sx wing and a big wing. Not parting with the rear bumper. Trying to sell the whole kit as a whole.


Sent from my iPhone using Tapatalk

[ethompson6]

Does the hatch have glass in it? I might be interested in the hatch and the wing. I'm not far from you, i'm in Morrisville.

[OpenThrottle]

Does the hatch have glass in it? I might be interested in the hatch and the wing. I'm not far from you, i'm in Morrisville.



Wing was sold yesterday. No glass but I have the OEM steel hatch with the glass that you can have for a few extra bucks. I used to work in Morrisville so you aren’t too far away from me.


Sent from my iPhone using Tapatalk

[ze12o]

Nice parts! Please lmk if you decide to part with the front spliter. Thanks glws

[OpenThrottle]

Nice parts! Please lmk if you decide to part with the front spliter. Thanks glws



If I sell the front diffuser it would have to be sold in conjunction with the side diffusers. Don’t really want to separate the diffusers like that.


Sent from my iPhone using Tapatalk

[ze12o]

If I sell the front diffuser it would have to be sold in conjunction with the side diffusers. Don’t really want to separate the diffusers like that.


Sent from my iPhone using Tapatalk

Would like to pick those up too! Just a shot in the dark of course. If you ever change your mind lmk :)

[OpenThrottle]

Would like to pick those up too! Just a shot in the dark of course. If you ever change your mind lmk :)



If you want front and side diffusers, just let me know.


Sent from my iPhone using Tapatalk

[OpenThrottle]

Buuuuuuump....


Sent from my iPhone using Tapatalk

[OpenThrottle]

To the top.....


Sent from my iPhone using Tapatalk

[OpenThrottle]

Bump it.


Make me some offers!

[OpenThrottle]

Buuuuuuump


Sent from my iPhone using Tapatalk

[OpenThrottle]

to the top.............

[OpenThrottle]

Bump it.....


Sent from my iPhone using Tapatalk

[CompleteXen]

Review Bump.

Just received the rack off him, looks good. Shipping was dealt with quickly.

Rack will be installed and tested tomorrow.

[OpenThrottle]

Bump..............


Sent from my iPhone using Tapatalk

[OpenThrottle]

to the top......

Still have a bunch of parts for sale. Make some offers folks!

[OpenThrottle]

bump it ............

[kingmulky]

I've been looking at those futura seats for a while. How did those fit in the 13? Did the bolster hit the door panel?

[OpenThrottle]

I've been looking at those futura seats for a while. How did those fit in the 13? Did the bolster hit the door panel?



They fit the same as Bride Zeta XL. They are pretty much same size. You can probably google images Bride Zeta 240sx and see how they fit.


Sent from my iPhone using Tapatalk

[OpenThrottle]

Bump.....


Sent from my iPhone using Tapatalk

[OpenThrottle]

To the top......

Still have lots of parts for sale. Make some offers!


Sent from my iPhone using Tapatalk

[OpenThrottle]

Buuuuuuump


Sent from my iPhone using Tapatalk

[OpenThrottle]

To the top......


Sent from my iPhone using Tapatalk

[OpenThrottle]

To the top........


Sent from my iPhone using Tapatalk

[OpenThrottle]

Buuuuuuuump


Sent from my iPhone using Tapatalk

[OpenThrottle]

Bumpppppppppp


Sent from my iPhone using Tapatalk

[OpenThrottle]

To the top.......


Sent from my iPhone using Tapatalk

[OpenThrottle]

buuuuump. Updated parts list and lowered some of the prices.

[lewyS14a]

Would you be able to ship the PBM rear camber arms to the UK ?

[OpenThrottle]

Would you be able to ship the PBM rear camber arms to the UK ?



Sent you a message


Sent from my iPhone using Tapatalk

[OpenThrottle]

To the top.....make some offers folks!


Sent from my iPhone using Tapatalk

[OpenThrottle]

to the top......

[OpenThrottle]

buuuuuuuuuuuump

[OpenThrottle]

Bump, still lots of parts that are left for sale. Make me some offers. Least I can say is no.

[OpenThrottle]

to the top......

[lgsr20swap]

Stand up dude. I forgot I asked about shipping already lol

[OpenThrottle]

Lol if your willing to pay for it. It would be a pain though. UPS/Fedex would probably want freight shipping on it.


Man I wish u where closer to me. I love this entire kit would u ship it?


Sent from my iPhone using Tapatalk






Sent from my iPhone using Tapatalk

[OpenThrottle]

to the top.......

[OpenThrottle]

Buuuuuuump....


Sent from my iPhone using Tapatalk

[OpenThrottle]

to the top............

[OpenThrottle]

Bump........


Sent from my iPhone using Tapatalk

[OpenThrottle]

To the top.....


Sent from my iPhone using Tapatalk

[mathiss14]

Pm sent


Sent from my iPhone using Tapatalk

[OpenThrottle]

Double post....

[OpenThrottle]

Bump........


Sent from my iPhone using Tapatalk

[1993fdrx7]

Wish you were closer to Concord, I am interested in several items.

[OpenThrottle]

Wish you were closer to Concord, I am interested in several items.



Concord, NC? Send me a PM and we’ll figure something out. I’m usually in that area on the weekends.


Sent from my iPhone using Tapatalk

[OpenThrottle]

Bump...updated sold items list.


Sent from my iPhone using Tapatalk

[OpenThrottle]

Bump...updated sold items list.

[s14_zenki_seatown]

I know they're big but hit me up if youd ship bash bars

[JrDarknes]

Are the PBM Rear lower control arms too big for you to ship?

[OpenThrottle]

Are the PBM Rear lower control arms too big for you to ship?



No sir. Can ship those. Should fit in a USPS large flat rate box.


Sent from my iPhone using Tapatalk

[JrDarknes]

No sir. Can ship those. Should fit in a USPS large flat rate box.


Sent from my iPhone using Tapatalk

Thanks for fast respond. Sent you a PM.