Fully Built Sr20det Partout

[dcraine]

Well the time has come, I recently got a killer deal on a 2jzgte so time to part ways with all of my Sr stuff. This motor only has 2,000 miles on it! Absolutely nothing wrong with it, pulled great, broke in properly and will take whatever you throw at it. I have most of the receipts for the parts and original boxes, weights of forged stuff.. ext.
Someone come buy this to fund my 2j build!
Will travel up to two hours to meet someone as long as gas money is involved.

Built Sr20det w/ 5 speed trans.
Stock bore
8:5:1 Compression
Je Pistons
Manley Rods
Acl Race Bearings
Arp Headstuds/Hardware throughout
Tomei Headgasket
New Valve Seals and Valve Job
Isr Oversized oil pan
Isr Gasket Kit
Isr lightweight pulleys
Oem waterpump/Thermostat
New timing kit
New dipstick tube
Stock fuel rail 370cc
Stock mani w/ stock t25
Xtd Stage 3 Clutch and Lightweight Flywheel
Circuit Sports shorthrow shifter
Exedy Slave
Tf valve cover nuts
Ecu
Cody Ace bracket for cold AC!

https://preview.ibb.co/dz9ZVd/IMG_3080_Edited.jpg (https://ibb.co/eP2A3y)
https://preview.ibb.co/kGxzwJ/IMG_3095.jpg (https://ibb.co/noXXGJ)
https://preview.ibb.co/iwrEVd/IMG_2411.jpg (https://ibb.co/cXnoqd) https://preview.ibb.co/mQ2A3y/IMG_2417.jpg (https://ibb.co/ksSciy) https://preview.ibb.co/ik8iOy/IMG_2413.jpg (https://ibb.co/djCA3y) https://preview.ibb.co/kYLKwJ/IMG_2392.jpg (https://ibb.co/hLREVd) https://preview.ibb.co/hQ41Ad/IMG_2395.jpg (https://ibb.co/exj1Ad) https://preview.ibb.co/cYUewJ/IMG_2394.jpg (https://ibb.co/mASA3y) https://preview.ibb.co/hC2ciy/IMG_2416.jpg (https://ibb.co/iUBEVd)
https://preview.ibb.co/ggKewJ/IMG_3091.jpg (https://ibb.co/nbFxiy) https://preview.ibb.co/iYJ6bJ/IMG_3088.jpg (https://ibb.co/gbqxiy) https://preview.ibb.co/coaV3y/IMG_3080.jpg (https://ibb.co/mf0xiy)
https://preview.ibb.co/g5vKwJ/IMG_2659.jpg (https://ibb.co/mqQxiy)
https://preview.ibb.co/ie88Oy/IMG_3072_Edited.jpg (https://ibb.co/cOneVd) https://preview.ibb.co/jRc2iy/IMG_3073_Edited.jpg (https://ibb.co/kSMjwJ) https://preview.ibb.co/mXFiqd/IMG_3070_Edited.jpg (https://ibb.co/h2B1bJ) https://preview.ibb.co/jwbZwJ/IMG_3069_Edited.jpg (https://ibb.co/c7eXiy)

Will Sell full setup/swap for $3500
Built Sr20det
Trasmission
Intercooler Kit
Radiator w/ Fans
Driveshaft
Wiring Specialties Pro Harness
Walbro 255

Or just Built Sr/Tranny for $3000

Also have a good amount of random parts.

Tomei PonCams 256/256 - Only 3,000 miles, Will include new timing chain gears aswell.
$150

Circuit Sport Rocker Arm Stoppers
$25

Oem Master Cylinder
$25

Oem Sr fuel rail with 370cc injectors
$50

https://preview.ibb.co/eaeSmJ/EAA8_D06_C_E6_FE_4_C4_C_B615_DD3_BB49_E2946_min.jp g (https://ibb.co/jr1wfd) https://preview.ibb.co/jsPoty/08_BBB19_F_47_FE_4_FA4_8_A9_E_FDBE4888_CD4_B_min.j pg (https://ibb.co/bH9z0d)
https://preview.ibb.co/bU1XmJ/18_FCC270_AFBC_433_E_91_F4_336_BFFDB7514_min.jpg (https://ibb.co/gjeJRJ)

Oem Sr20det Intake Manifold with new gaskets and iavc.
$150

Oem Sr20det water necks
$25

Oem Sr20det Iavc
$35

Oem Sr20det Maf's
$70

https://preview.ibb.co/irhxmJ/A6_D6_EE1_D_EEFC_4_B6_D_B080_9_AC626_F6_D950_min.j pg (https://ibb.co/hgFHmJ)

Oem Sr20det flywheel and pressure plates
$50 for one set

https://preview.ibb.co/n36ORJ/011_C3_DAA_E8_F3_407_E_B04_C_25_B718_C36580_min.jp g (https://ibb.co/kF5uYy)

New Isis z32 Maf and New Pigtail
$75

4x Oem Coilpacks
$75

Oem sr20det fuel rail without injectors
$20

Sr20det e6 ecu, ive ran this ecu on both my red and blacktop and it worked perfect.
$100

https://preview.ibb.co/h9qxLd/D7_D41_DFD_A86_F_4920_A279_E11_DFAEE3_AB1_min.jpg (https://ibb.co/jTiHLd)

Oem sr20det stock rods and pistons, nothing wrong with them besides some surface rust. Would be good for a budget build. All rings still on them, Went stock bore forged.
$50

https://preview.ibb.co/c80Q6J/32702_E55_3_D70_4_B2_D_A1_F5_818_BAB18946_C_min.jp g (https://ibb.co/f5TZ0d)

Sr20det Head, bottom end spun a rod. Nothing wrong with the head it had the Tomei Pon Cams in it and will not come with them unless you buy both.
$200

https://preview.ibb.co/jYcrDy/B0_B8_A23_C_050_F_45_FC_A223_F86_DC8783_E4_C_min.j pg (https://ibb.co/mxUSmJ)

Spare Sr20 Transmission
$200

https://preview.ibb.co/nv390d/073_DFC63_E77_F_4_B20_92_E2_E9_F074_BE5_E18_min.jp g (https://ibb.co/jMjtRJ)

Bare sr20det valve cover and gasket
$75

https://preview.ibb.co/jkA6fd/DA084_F6_B_954_D_4938_AA16_355_C0652_A363_min.jpg (https://ibb.co/fXG1Dy)

Cx racing brand new top mount t3/t4 manifold for sr20det. Was reinforced heavily and pressure tested by Borla Performance.
$200

https://preview.ibb.co/fMYyty/B3_CED7_DE_7736_49_C5_BE33_F1942906_DF60_min.jpg (https://ibb.co/cXonmJ) https://preview.ibb.co/gf44Yy/9686_E77_E_3017_4_F50_8_BEB_5_C03504_D2_FB4_min.jp g (https://ibb.co/cgsDRJ)

New Garrett Gt2871r .86
$Pending

Sard Top Feed fuel rail
$sold

1000cc Injector Dynamics Injectors
$sold

Spare Cas
$75


S14 black glove box
$50

S14 black outer cluster trim piece
$20

Innovate Lc-2 Wideband with new O2 sensor
$sold

[Samiata]

interested in turbo lmk if other guy doesn't go through

[roninwon]

Coil packs, cas?

[dcraine]

Coil packs, cas?

Yes sir, have a spare cas and i believe two sets of coil packs.

[dcraine]

interested in turbo lmk if other guy doesn't go through

Alright man, Ill keep you updated should be going through tonight.

[roninwon]

How much shipped to 13603?

[nisileighty]

Are they s13 valve covers?

Edit: Nvm, pics just loaded. I’ll take one, text me at 206 566 9749. Thanks.

[borka]

PM'd about ID1000 and Innovate WB

[boya1989]

I need that intake that goes off the turbo

[dcraine]

I need that intake that goes off the turbo

Not parting that out yet man

[djtoonjr]

How much for Cody Aces , a/c bracket? U got all the hardware? u got all the A?C stuff too? compressor, lines off compressor?

[Kviper52]

LC-2 Still availible?

[dcraine]

How much for Cody Aces , a/c bracket? U got all the hardware? u got all the A?C stuff too? compressor, lines off compressor?

$50 for the Cody ace bracket and I do have an ac compressor attached I’d let the whole setup go for $150. It worked perfect on my car, but I’m keeping the ac lines as im going to have ac on my 2j build.

[dcraine]

LC-2 Still availible?

Yes sir I sure do

[borka]

Yes sir I sure do

i want the ID1000 and LC2. i am still waiting for you to reply to my PM.

[djtoonjr]

$50 for the Cody ace bracket and I do have an ac compressor attached I’d let the whole setup go for $150. It worked perfect on my car, but I’m keeping the ac lines as im going to have ac on my 2j build.

What compressor is on it? can u PM pics of it, to verify it'll clear my manifold based on hose position? thanks

[nisileighty]

Bump for great seller. Fast shipping.

[joaquin714]

Thanks for the Cody ace bracket! Quick communication and prompt shipping

Bump

[Keegster]

Interested in compressor if its a dual cam s13, and coil pack harness

[lewisfk]

What's up with ecu. I.e. tune

[dcraine]

What's up with ecu. I.e. tune
Stock Ecu stock tune

[dcraine]

Bump it up let’s get this stuff sold!