Sr20SilviaS13
04-10-2018, 06:12 PM
Ok guys this is pretty much my build list. If anyone has any of this stuff let me know, i intended on purchasing new but i havent really cracked the surface yet so i have a lot of time. Not in a huge rush.
Purchase List:
- LS1 Intake manifold
- LS Injectors between 60-70lb
- Rising rate Fuel Pressure Regulator
- Fuel Cell
- Fuel pump(s), looking mostly for dual walbro 255's or an aeromotve 1000
- LS1 Water pump
- LS1 water pump spacers for truck accessories
- its a stretch but, Z32 N/A 45 speed -> LS Adapter plate (Preferably G-force)
- If anyone is sitting on an FiTech Harness or complete EFI (70003) id buy it
- 300ZX N/A clutch capable of at least 550tq
- Steering wheels(Momo pattern only)
- Boost gauge
- Tacometer
- Oil pressure Gauge
- Naca Ducts, Prefer single 3in ducts, i need 2 of these.
- Steering wheel hub adapter for E36, prefer short hub Momo pattern only
- Hubs(dependent on knuckle purchase)
I know im forgetting things, this list will be updated or organized daily. Please text me, we are in different time zones and PM'ing can be slow on my end and i apologize. However feel free to PM, i will respond within the business day. If you dont see something you have and its not listed below, offer up! I dont need any rear suspension components.
PHONE
6O3-42I-4I54
Have cash ready, all need to be shipped to 03038.
Purchased:
S13 or S14 FLCA’s
S13 LS swap mounts
S13 Coilovers
S13 or S14 lower steering shaft, must include rag joint at rack
S13 or S14 tension rod brackets or power brace
S13 or S14 sway bar brackets and bushings
S13 or S14 front knuckles, modded or stock.
S13 or S14 power steering rack
350Z Brembos / Rotors / Pads
5x114 17" wheels. between 8.5-10" wide. NO stock wheel, also remember I'm in NH shipping wont be easy.
5X120 17" wheels, between 9.5-10" wide. NO stock wheels. also remember I'm in NH shipping wont be easy.
S13/S14 Front sway bar, prefer aftermarket large diameter.
Purchase List:
- LS1 Intake manifold
- LS Injectors between 60-70lb
- Rising rate Fuel Pressure Regulator
- Fuel Cell
- Fuel pump(s), looking mostly for dual walbro 255's or an aeromotve 1000
- LS1 Water pump
- LS1 water pump spacers for truck accessories
- its a stretch but, Z32 N/A 45 speed -> LS Adapter plate (Preferably G-force)
- If anyone is sitting on an FiTech Harness or complete EFI (70003) id buy it
- 300ZX N/A clutch capable of at least 550tq
- Steering wheels(Momo pattern only)
- Boost gauge
- Tacometer
- Oil pressure Gauge
- Naca Ducts, Prefer single 3in ducts, i need 2 of these.
- Steering wheel hub adapter for E36, prefer short hub Momo pattern only
- Hubs(dependent on knuckle purchase)
I know im forgetting things, this list will be updated or organized daily. Please text me, we are in different time zones and PM'ing can be slow on my end and i apologize. However feel free to PM, i will respond within the business day. If you dont see something you have and its not listed below, offer up! I dont need any rear suspension components.
PHONE
6O3-42I-4I54
Have cash ready, all need to be shipped to 03038.
Purchased:
S13 or S14 FLCA’s
S13 LS swap mounts
S13 Coilovers
S13 or S14 lower steering shaft, must include rag joint at rack
S13 or S14 tension rod brackets or power brace
S13 or S14 sway bar brackets and bushings
S13 or S14 front knuckles, modded or stock.
S13 or S14 power steering rack
350Z Brembos / Rotors / Pads
5x114 17" wheels. between 8.5-10" wide. NO stock wheel, also remember I'm in NH shipping wont be easy.
5X120 17" wheels, between 9.5-10" wide. NO stock wheels. also remember I'm in NH shipping wont be easy.
S13/S14 Front sway bar, prefer aftermarket large diameter.