Whats the stock boost setting on ISR 3871R turbo?

[unicoder]

Does anyone know what the stock wastegate boost setting is on this turbo?

I have a boost gauge, but want to be 100% sure I am hitting the right boost amount after doing my boost leak test. From my searching i believe it is to be 7psi

I haven't adjusted the actuator at all, I am running it exactly as it came in the box.

[anthony_240]

It’s higher than 7... I had to adjust mine when I got it... if you have a hand held pump you can find out...

Take the line off from the turbo , leave it connected to the waste Gate , T it off, one side to your boost gauge one side to your hand help pump...

Pump it, as you build pressure your boost gauge will go up, what ever number your boost gauge hits where the watergate starts to open is where it is set at .. adjust accordingly


Sent from my iPhone using Tapatalk

[RalliartRsX]

100psi........

Use a pump to test your gate. Done. Check youtube how. It takes 2 mins and a $20 bicycle pump or similar. Also, when you did a boost leak check, you should have also tested your wastegate setting using the same pressure source.