how hard would it be to make an s14 exhaust fit an s13?

[AN89HATCH]

I found a guy selling n1 duals for a good price, but the only thing is its for an s14 =(. Has any one ever modded an s14 exhaust to fit an s13? if so what would i need to get changed? the cat flange, and mounting points?

[andrave]

yes cut it and bend it and it fits, probably not worth the work. its about 2-3 " too long and it will prolly hit the floor pan under the driver's side, and the hangers mostly don't match up.

[sciamop]

yes cut it and bend it and it fits, probably not worth the work. its about 2-3 " too long and it will prolly hit the floor pan under the driver's side, and the hangers mostly don't match up.

Translation:

NO.

BTDT,
Todd

[mjjstang]

this Is what I wanted to do with a 180 dollar SSautochrome, cuase it is so cheap, then I found out i cant and it now costs me 600 for the exhaust. probably would have been worth it there but screw it.

[papershot]

mjjstang, you do realize theres a s13 version SSautochrome, right?

[oberkill]

I had a S14 N1 on my S13 for a couple of years. Was sent the wrong exhaust and it cost to much for return shipping. I cut one of the rear hangers and welded it the way it needed to be. It was a little too long and the angle was differant but it did work. I would not do it on purpose though. lol

Alan

[andrave]

yeah I did that too.

[ghostuss]

I had a S14 N1 on my S13 for a couple of years. Was sent the wrong exhaust and it cost to much for return shipping. I cut one of the rear hangers and welded it the way it needed to be. It was a little too long and the angle was differant but it did work. I would not do it on purpose though. lol

Alan

Lol wouldn't this look weird? A long ass pipe coming out of the rear of ur fastback/coupe?

[mjjstang]

yah i though there was, but anyway on their site I think they were sellin them for like 350 or something, I want the ebay ones for 180, and they were only sellin s14 ones, oh well the nurspec should be nice. hope so for 600 Fin dollars

[andrave]

yeah my friend has the Nurspec R LM edition, some limited edition that has 3.75 piping. Its the most awesome exhaust I've ever seen, I want to climb under his car and dry hump it.

[nrg]

I installed a s14 N1 exhaust on my friend's S13. Every hanger lined up but they were sideways. You would have to see it to understand what I'm talking about.
The rear 2 hangers for the exhaust canaster lines up off center and sat too high. It was very hard to get them how we did. Had to flip the bracket backwards.
The seller said the exhaust was from an s13. =(
http://img90.exs.cx/img90/2391/s13n1.jpg

[andrave]

it probably was then. if it was really for an s14, the hangers would not line up, it would be too long, and it would not be bent properly to clear the driver's side floor board.

[Maeda]

Good fucking luck.

I've tried it. Lots of cutting, and welding required.

also read.

NOT WORTH IT.

[andrave]

it takes one cut, a torch, and a hammer, and some work on the hangers. But of course every exhaust will be different. For instance, n1 duals would be damn near impossible