PDA

View Full Version : NC S13 SR20DET long block, Clutch Kit, 1000cc Five0 Injectors, Skinny o2, CAS ATI Damper


KenSR20
02-19-2018, 05:38 PM
I am in the middle of a part out and have a good bit of parts for sale. New build didn't work out and just done with the setup at this time. I have not been on here in years but figured i'd see if there is any interest. Prices are of course OBO

1000cc Nissan JECS FiveO Phase II Fuel Injectors SR20 KA24 VQ30 VE30 VH41 VH45 9/10 - SOLD
Nissan OEM 22690-50F00 Oxygen Sensor Skinny SR20DET S13 O2 SR20 Silvia 180SX 9/10 - SOLD
ATI Super Harmonic Damper S13 S14 S15 SR20 SR20DET RWD 918582 7/10 - SOLD
Head - SOLD

3x SR Coil packs - 10/10 Like New - $20 per coil + shipping
Purchased brand new 12/22/2016 3k miles on them

https://i.ebayimg.com/images/g/hU0AAOSwtBdae7F6/s-l1600.jpg

ACT NS1-HDSS Street Strip Clutch Kit for Nissan 89-98 SR20DET S13 S14 - SOLD

NISSAN SR20DET CAM ANGLE SENSOR / Crank SR20 Silvia CAS S13 S14 S15 23731-50F02 - SOLD

Block -
Greddy Oil Pan - SOLD
Upper Oil Pan - $100 shipped

roninwon
02-19-2018, 05:49 PM
How much are you asking for the injectors?

KenSR20
02-19-2018, 06:06 PM
I guess posting prices would help, whoops. Updated.. they retail for 100 per injector and i hardly used them so I put 320.

RalliartRsX
02-19-2018, 07:31 PM
Pictures of the block? What's the condition and why did it lose oil pressure? Was it bored with a torque plate?

KenSR20
02-19-2018, 07:36 PM
I have not torn it down yet.. but might have to. I was originally hoping to sell as all one unit. Block has never been bored, aftermarket pistons stock size.

The behavior was really odd. I was cruising on the highway (not boosting, I was planning to go to the dyno to touch up tune soon) and i hear a light knock and at first was thinking "that isn't what I think it is" due to recently rebuilt.. and it got louder.. so i tried pulling over and getting off the highway and the knock was getting loud at that point.

Oil plug had a glob of junk on it but didnt see metal yet. I just took the engine out last weekend

RalliartRsX
02-19-2018, 08:09 PM
Hmmmm. 86.5mm is a .20 over bore. Store bore is 86mm

Let know what the valvetrain looks like with the head removed

KenSR20
02-19-2018, 08:21 PM
Maybe I did get it bored.. i've had this engine since 2004-2005.. lol it must have been bored back in 07 then. Thats when I got the pistons and rods. 2015 rebuild it overheated on the highway and replaced some damage parts, hone, and new rings.. I have the receipt from machine shop, so I can share what exactly was done then. He said the block was fine then.

It's been a long time since i've been digging into parts and specs so that must be correct. I have receipts on everything for the most part so it will come back eventually... I will follow up with more pics on that block

2jzjason
02-23-2018, 01:23 PM
Willing to part out whole head ? If so pm me

mike240s
02-23-2018, 05:24 PM
if you part the block i want the oil pan

RalliartRsX
02-23-2018, 06:23 PM
Did you assess the block? I may be interested in just the short block

KenSR20
02-23-2018, 07:00 PM
Not yet.. I hope to get to it next week. Thought I might be able to this weekend but some things came up.

KenSR20
03-04-2018, 06:04 PM
I got all the accessories off.. ill take the head off tomorrow. I found metal in the oil filter.. not sure if its easy to see in the pic.

https://scontent-iad3-1.xx.fbcdn.net/v/t35.0-12/28641305_10157202165789922_2021375115_o.jpg?oh=077 95f83fa75b432a0ab0a57255af3ae&oe=5A9ED815

KenSR20
03-05-2018, 06:57 PM
Took the head off the block today.. ill take block apart tomorrow

https://drive.google.com/file/d/1s0wcxU4GAxs9bYbNfB1QJzwCnfE5RK35/view?usp=drive_web

https://drive.google.com/file/d/15gAd8ZM1bm0amauc3U3huZBQxhrdKdbK/view?usp=drive_web

https://drive.google.com/file/d/1miLrWBCN2aqmXt7mySc0ovIq6ARQVcoy/view?usp=drive_web

https://drive.google.com/file/d/1fulYE1BlrgvIT4qJuimpK-QUr1WVo1yn/view

https://drive.google.com/file/d/1hOspygl5r6WQfqT9VLKojw7QRGUq4D10/view?usp=drive_web

mike240s
03-05-2018, 08:38 PM
How much for the oil pan?

KenSR20
03-22-2018, 04:01 PM
Still have not got to the block yet.. lol. Every time I start looking into it I have to meet someone to sell something. Running low on parts finally so I will get to it

KenSR20
03-29-2018, 09:51 AM
Update - Short Block sold

KenSR20
04-02-2018, 09:11 AM
Dropped price on the CAS and Clutch.. I do have the greddy oil pan available.. i sent you a PM. Apologies on the delays I kept getting people saying one thing and doing something different on buying the short block locally but i broke it down

KenSR20
04-02-2018, 09:20 AM
Pictures of the block? What's the condition and why did it lose oil pressure? Was it bored with a torque plate?

the block spun a rod bearing on piston number 2