sidewaysil80
02-16-2018, 07:42 AM
I’m located in Northern Virginia and will ship if buyer pays actual cost through UPS Ground.
Up for sale is my spare SR long block and transmission. The block suffered a broken ring land on piston 3 and was meticulously inspected and organized. ALL rods, the crank, and bearings are in excellent shape. If you were on a budget you could simply hone number 3 cylinder and replace its piston and be good to go. Comes with everything except timing chain assembly and front cover.
https://i.imgur.com/hjGQY56l.jpg
https://i.imgur.com/TgHxocrl.jpg
The head is ready to go and was just picked up from the machine shop where David Lucash of Pro Auto Performance did the following:
-multi angle valve job
-de shroud valve areas
-clean up/mild polish ports
-checked valve:valve guide clearance
-checked head for straightness
-removed all traces of old head gasket
The head comes with everything except valve springs and hydraulic lifters
https://i.imgur.com/YwNCRqol.jpg
https://i.imgur.com/fL8BEjkl.jpg
The trans is from a recently aqquired SR swap. Its very clean and the swap it came from was low mileage and in excellent condition.
$700 for the block/head and $300 for the trans.
Also have an immaculate s13 240sx coupe shell with flawless interior that includes crackless dash w/ working hud.
Up for sale is my spare SR long block and transmission. The block suffered a broken ring land on piston 3 and was meticulously inspected and organized. ALL rods, the crank, and bearings are in excellent shape. If you were on a budget you could simply hone number 3 cylinder and replace its piston and be good to go. Comes with everything except timing chain assembly and front cover.
https://i.imgur.com/hjGQY56l.jpg
https://i.imgur.com/TgHxocrl.jpg
The head is ready to go and was just picked up from the machine shop where David Lucash of Pro Auto Performance did the following:
-multi angle valve job
-de shroud valve areas
-clean up/mild polish ports
-checked valve:valve guide clearance
-checked head for straightness
-removed all traces of old head gasket
The head comes with everything except valve springs and hydraulic lifters
https://i.imgur.com/YwNCRqol.jpg
https://i.imgur.com/fL8BEjkl.jpg
The trans is from a recently aqquired SR swap. Its very clean and the swap it came from was low mileage and in excellent condition.
$700 for the block/head and $300 for the trans.
Also have an immaculate s13 240sx coupe shell with flawless interior that includes crackless dash w/ working hud.